Integrating path-planning and control for robotic unicycles
Máté B. Vizi, Dénes Tákács, Gábor Stépán, Gábor Orosz · 2025
Read Integrating path-planning and control for robotic unicycles by Máté B. Vizi, Dénes Tákács, Gábor Stépán, Gábor Orosz (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-02700.txt.
Introduction
Vizi and co-authors join path planning and control for a one-wheeled robot in a 2025 paper. A robotic unicycle must balance, speed up, slow down, and turn on a single wheel. Planning a route without regard to how the wheel grips the road can produce paths the robot cannot follow. The team design both layers together so the plan respects what the machine can do.
Their planner splits a route into straight parts for speeding up or braking, and curved parts for turning. The curve shapes are tuned with control performance and wheel slip limits in mind. Computer simulations show the combined approach working across a range of moves. The design offers a template for small balancing robots that must travel set routes on their own.
Catalog record
| CREATOR | Máté B. Vizi, Dénes Tákács, Gábor Stépán, Gábor Orosz |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 83 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-02700
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Integrating path-planning and control for robotic unicycles Máté B. Vizi, Dénes Tákács, Gábor Stépán, Gábor Orosz Abstract This article focuses on integrating path-planning and control with specializing on the unique needs of robotic unicycles. A unicycle design is presented which is capable of accelerating/breaking and carrying out a variety of maneuvers. The proposed path-planning method segments the path into straight and curved path sections dedicated for accelerating/breaking and turning maneuvers, respectively. The curvature profiles of the curved sections are optimized while considering the control performance and the slipping limits of the wheel. The performance of the proposed integrated approach is demonstrated via numerical simulations. \svgpath figures I Introduction Electric unicycles are among a new type of micromobility vehicles that are rapidly spreading in urban environments for commuting. Riding these devices is energetically the most efficient method of transportation [ 1 ] , which is a large factor in their popularity. Other factors include their excellent agility and maneuverability, which arise from their highly dynamic characteristics. These characteristics also make mechanical design, path planning and control design very challenging, which attracted the researcher’s attention over the years. The first robotic unicycle design known to the authors appeared in [ 2 ] , which used a point mass and a pendulum actuator somewhat similar to the approach of this paper. Since then, several designs with a variety of different actuators have been proposed. Usually, two or three actuators are used to drive and maneuver the unicycle, these include pendulums [ 3 , 4 ] , flywheels [ 3 , 5 , 6 ] , and robotic arms [ 7 ] . Gyroscopes are also often used for the lateral stabilization of unicycles and bicycles [ 8 , 9 ] . Even humanoid-type unicycles were investigated [ 10 ] . Challenges typically include the modeling of the wheel-ground contact, incorporating realistic tire forces, and the path-following control design [ 11 ] . As far as the authors know, path planning for physical unicycles is completely missing from the literature. Next to robotic unicycles, various wheeled mobile robot designs are investigated by the robotics community such as wheel transformers [ 12 , 13 , 14 ] , mecanum wheel robots [ 15 , 16 ] , snake-like robots [ 17 , 16 ] , reconfigurable robots [ 16 , 18 ] , in-pipe robots [ 19 , 20 ] , and the wheeled biped and quadruped robots like the Unitree B2-W and the Lynx M20; just to mention a few research directions that utilizes rolling as the main working principle. It is important to distinguish the kinematic unicycle model from dynamic models of real physical unicycles. The kinematic unicycle model describes the ideal planar motion of nonholonomic mobile robots that is frequently used for path planning [ 21 , 22 , 23 , 24 ] and even for control design in case of differential drive robots [ 25 , 26 , 27 , 28 , 29 ] . The kinematic unicycle model is also referred to as the Dubins car model [ 30 ] or the skate model [ 31 ] in different research fields. The kinematic unicycle model is only used for path planning in this work. Dynamic unicycle models describe the three-dimensional spatial motion of physical unicycles including the gyroscopic effects and the tilting/leaning degrees of freedom. These dynamic unicycle models are essential for control design in case of real unicycles. In this work, if nothing else mentioned, unicycle refers to the physical unicycle or the corresponding dynamical model, while the kinematic unicycle model is always explicitly highlighted. Fig. 1: (Top) Mechanical model of the robotic unicycle. (Bottom) Coordinated frames, kinematic variables and forces. The main contribution of this paper is integrating path planning and control design to make the strongly unstable robotic unicycle capable of carrying out a large variety of maneuvers. Building on our earlier works [ 32 , 33 ] , a robotic unicycle design is proposed in this paper, which is inspired by how human riders balance and maneuver when riding unicycles. The accelerating and breaking is done by leaning forward/backward while also balancing an inverted pendulum, see Figure 1 . Maneuvers in the lateral direction, such as turns and lane changes, are carried out by shifting a mass left/right, which is also responsible for balancing the lateral motion. This simple design approach will also help the physical implementation, which is beyond the scope of this paper. In this paper, we assume that the wheel of the unicycle is rolling without slipping, which results in a nonholonomic mechanical system [ 34 , 35 , 36 , 37 , 38 , 39 , 40 , 41 ] . The governing equations are derived in closed form using the Appellian approach [ 42 , 43 , 31 ] . The equations of motion are given in a similar form to that used in robotics. However, the Appellian representation contains less number of equations than the usual Lagrangian formalism since the kinematic constraints of the rolling wheel are incorporated. In addition, the wheel-ground contact force is also given in closed form in this paper. Applying path-based coordinate transformation, the longitudinal position along the path, together with the lateral and orientation errors, become system states, which are utilized in the subsequent control design. A path planning method is proposed, which is specifically tailored to the needs of strongly unstable unicycles as it allows the plan to be tuned considering the dynamics and the controller. Thus, an optimal path can be chosen, for example, by minimizing the actuator forces or the friction forces on the ground (and so avoiding the slipping of the wheel). The design procedure and the corresponding evaluation are demonstrated on the proposed unicycle model. For control design, the equations of motion are linearized around the straight rolling steady state, and the dynamics are decomposed into lateral and longitudinal subsystems. The open-loop stability of these subsystems is investigated analytically, and linear state feedback controllers are designed for path following. By analyzing the dynamics of the closed-loop system, the path plans are optimized for best performance. The rest of the paper is structured as follows. The path planning framework is proposed in Section II . The robotic unicycle design is introduced in Section III and the corresponding governing equations are derived in Section IV . The control design is presented in Section V and the path planning is optimized in Section VI via numerical simulations. Section VII concludes the work and lays out future research directions. II Maneuver planning Maneuver planning for unicycles requires special attention due to the strongly nonlinear and highly unstable dynamical characteristics of these devices. The lateral and longitudinal dynamics are strongly coupled during turning, while they can be separated in the case of straight rolling. Thus, we propose to divide the path into straight and turning sections such that acceleration and deceleration are only planned during the straight sections. Avoiding acceleration and deceleration during the turning helps the control design and improves the control performance. We emphasize that the path designed below is the path of the points we intend the wheel-ground contact point P to follow, see Figure 1 . The following subsections propose a