Optimal boron-doped graphene substrate for glucose Raman signal enhancement
Jan Komeda, Antonio Cammarata, Tomas Polcar · 2025
Read Optimal boron-doped graphene substrate for glucose Raman signal enhancement by Jan Komeda, Antonio Cammarata, Tomas Polcar (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-02642.txt.
Introduction
Jan Komeda, Antonio Cammarata, and Tomas Polcar tune a graphene sheet to catch glucose by its Raman glow. Their 2025 paper deals with surface-enhanced Raman spectroscopy, where a substrate swells a molecule's faint signal. Boron salted into graphene, called B-graphene, is known to boost simple molecules, and fresh work says heavy doping can hold stable. Quantum simulations vary boron share and layout against glucose.
Force and vibration reads show heavier doping swells the glucose signal more. The molecule's pose on the sheet also steers the reply. The team backs heavy B-graphene for glucose sensing and offers the vibration lens for hunting other substrates.
Catalog record
| CREATOR | Jan Komeda, Antonio Cammarata, Tomas Polcar |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 49 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-02642
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Optimal boron-doped graphene substrate for glucose Raman signal enhancement Jan Komeda, Antonio Cammarata, Tomas Polcar Abstract Surface Enhanced Raman Spectroscopy (SERS) is a highly sensitive and selective technique that greatly enhances the signal of an analyte, compared with its signal from classical Raman Spectroscopy, due to its interaction with a substrates surface. It has been shown that low concentration boron-doped graphene (B-graphene) enhances the Raman signal of simple organic molecules like pyridine. Recent studies also suggest that B-graphene can remain thermodynamically stable when doped with significantly higher concentrations of boron than previously observed. In this framework, we use quantum mechanical simulations to investigate the influence of dopant concentration and geometric distribution on the effectiveness of B-doped graphene as a SERS substrate, with glucose as analyte. By combining analysis of interatomic force constants and of phonon eigenvectors composition, we conclude that higher doping concentrations provide a larger enhancement to glucose’s Raman signal, while the molecule orientation relative to the surface plays a fundamental role in the Raman response. We suggest that high concentration B-graphene presents itself as a potential substrate for SERS based detection of glucose, while the used phonon-based analysis can be promptly applied for the search of promising candidates as substrate materials for enhanced Raman response. 1 Introduction Diabetes mellitus is one of the most prominent metabolic disorders of our time [ 1 ] ; being characterized by chronic hyperglycaemia, it is usually diagnosed based on the fasting plasma glucose level. The golden standard of testing for blood glucose have been electrochemical sensors since their inception [ 2 ] . Blood is commonly extracted using finger sticks or by drawing from a vein, both of which are invasive techniques that cause a certain degree of discomfort to the patient, while frequent blood glucose level tests are also necessary to manage the disease once it has been diagnosed. There is then a constant stimulus to create faster, easier, cheaper and ideally non-invasive methods for measurements of glucose levels. Researchers have proposed using microneedles for blood extraction or switching to analyzing sweat or the interstitial fluid of skin; however, small amount of collected blood or low glucose concentration in fluids other than blood leads to a decrease in accuracy when electrochemical sensors are used [ 3 ] . One of the potential solutions is to develop sensors based on surface-enhanced Raman spectroscopy (SERS). SERS is a highly sensitive and selective technique which greatly enhances the signal of an analyte compared to classical Raman spectroscopy, due to analyte interaction with a substrate [ 4 ] . It is then a promising method to detect glucose from small blood amounts or bodily fluids with low glucose concentrations. Research on the creation of SERS based glucose sensors is ongoing [ 5 ] . The most commonly used SERS substrates are noble metals, as they usually provide the largest Raman signal enhancement; however, they have drawbacks such as poor glucose adsorption on bare surfaces [ 6 ] , high monetary cost, adverse metal-adsorbate interactions, catalytic and photobleaching effects [ 4 ] . Significant effort has been put into the research of alternative substrates, especially 2D nanomaterials such as graphene [ 7 ] , transition metal dichalcogenide monolayers and Janus structures [ 4 ] . In this study, we examine the ability of B-graphene to act as a SERS substrate for glucose detection using quantum mechanical simulations and phonon decomposition analysis. We choose B-graphene as opposed to TMDs or Janus structures due to graphene’s unique abilities such as suppressing fluorescence [ 4 ] . B-graphene has been shown to enhance the Raman signal of a simple analyte like pyridine by an order of 10 3 to 10 4 [ 8 , 9 ] ; such enhancement is significantly larger compared to graphene one by a factor ranging from 2 to 17 [ 4 ] . However, these studies have only considered low doping concentrations and non-periodic boundary conditions. The latter choice in the computational setup may introduce a severe approximation, which results in poor estimations of the substrate response. In addition, when graphene flakes are used as a geometric model, the flakes are terminated with hydrogen atoms for the purpose of stability, which introduces fictitious interactions not present in the real system. Lastly, to our best knowledge, no computational study on interactions between glucose and B-graphene exists. For these reasons, the goal of the present work is to explore the effects of different concentrations of boron in B-graphene on the enhancement of the Raman signal of glucose. We show that 12.5 \% concentration B-graphene provides a large enhancement to the Raman signal and, as such, it might be better suited as a SERS substrate for glucose sensing. We also discuss how the relative orientation of the molecule with respect to the surface affects the Raman activity Our phonon-based analysis is general and can be promptly applied for the prediction and characterisation of Raman signals in the presence of substrates, regardless the chemical composition of analyte and substrate. 2 Computational details We select \beta -glucose as analyte, as it is the most prominent anomer in aqueous solutions (e.g. blood) [ 10 ] ; the reference atomic geometry is the conformer {}^{4}C_{1} [ 11 ] . The graphene layer is placed in the (\bm{a},\bm{b}) plane of the unit cell, with the \bm{c} lattice vector orthogonal to the plane and length set to 50 Å, providing a vacuum slab large enough to avoid any interactions between replicas arising from the periodical treatment of the unit cell. The substrate is modeled by a 6\times 6\times 1 graphene supercell, on top of which we place the glucose molecule with its hydroxymethyl (i.e. CH 2 OH) group pointing towards the substrate. This is our reference system, which we name gG (glucose on Graphene). We then modify the gG system by substituting carbon atoms of the graphene layer with 1 and 9 boron atoms, thus creating the gLowBG and gHighBG systems, respectively, the latter consistent with the reported stable geometry [ 12 ] ( Figure 1 ). Figure 1: Initial geometries of the studied systems (a) gLowBG, glucose on 1.39\% B-graphene, (b) gHighBG, glucose on 12.5 \% B-graphene. Brown spheres represent carbon atoms, while red, white and green spheres represent oxygen hydrogen and boron atoms, respectively. The graphene layer in gLowBG and gHighBG systems has a boron concentration of 1.39\% and 12.5\% , respectively. We perform ab initio calculation within the density functional theory (DFT) framework, as implemented in the VASP software [ 13 ] . We use the Perdew-Burke-Ernzerhof energy functional [ 14 ] together with the vdw-DFT-D2 van der Waals correction [ 15 ] , as suggested by previous studies [ 16 , 17 ] . Based on our benchmarks, we set the energy cutoff of the plane-wave basis set to 520 eV and the convergence criterion for the electronic Self-Consistent Field procedure to 10^{-8} eV, while the reciprocal space sampling is performed with a maximum of 7\times 7\times 1 Monkhorst-Pack mesh [ 18 ] . In all systems including a glucose molecule adsorbed on top of the substrate, the length of the lattice parameters \bm{a} and \bm{b} correspond to a 6\times 6\times 1 supercell of the primitive graphene cell. Geometric