Mechanical enhancement of quantum oscillations

Maximilian Daschner, Ivan Kokanović, F. Malte Grosche · 2025

Read Mechanical enhancement of quantum oscillations by Maximilian Daschner, Ivan Kokanović, F. Malte Grosche (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-02612.txt.

Introduction

Maximilian Daschner, Ivan Kokanovic, and Malte Grosche report a cautionary physics result in this 2025 paper. Their team measured wave-like swings in the resistance of a crystal as a magnetic field changed. The swings looked far stronger than expected, which might hint at exotic traits in the material. Careful checks point to a plainer cause. The field twists the sample mount, and that twist feeds back into the reading. A model of the setup matches the data well. The authors warn that mount effects can fake exotic signals.

Catalog record

CREATORMaximilian Daschner, Ivan Kokanović, F. Malte Grosche
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-02612

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Mechanical enhancement of quantum oscillations Preprint: APS/123-QED Maximilian Daschner, Ivan Kokanović, F. Malte Grosche Abstract We investigate quantum oscillation measurements in the Dirac nodal-line semimetal TaNiTe 5 which exhibit a strongly enhanced amplitude in the magnetoresistance. We show that mechanical properties of the measurement setup in combination with de Haas - van Alphen oscillations in the magnetic torque can cause this enhancement in the measured resistance, without involvement of any topological properties in this material. To support the empirical data, a numerical model is provided, showing good agreement. I Introduction Weyl and Dirac semimetals are materials whose band structure hosts a linear band crossing in the Brillouin zone, usually close to the Fermi energy. These materials have recently gained interest due to their topological properties lv2021experimental ; armitage2018weyl ; yan2017topological ; xiao2010berry ; ong2021experimental ; wang2017quantum ; hasan2010colloquium . Novel experimental signatures, some of which include the appearance of Fermi arcs xu2015discovery and the presence of the chiral anomaly huang2015observation ; xiong2015evidence , were first discovered in these materials. When exposed to strong magnetic fields, metals in general exhibit so-called quantum oscillations that can be probed shoenberg2009magnetic in various physical properties such as the magnetisation, known as the de Haas - van Alphen (dHvA) effect, or the magnetoresistance (MR), known as the Shubnikov - de Haas (SdH) effect. These oscillations allow to map out the Fermi surface of a material and provide additional information about the effective masses and the nature of electron scattering. What motivates the field of probing quantum oscillations in Dirac semimetals is that under certain circumstances, they obtain a \pi phase shift which can be directly related to the presence of non-trivial Berry curvature around the Dirac nodal points mikitik1999manifestation . Among the various material candidates for Dirac semimetals, the family TaXTe 5 (X = Ni, Pd, Pt) xu2020anisotropic ; wang2022coexistence ; liimatta1989synthesis ; hu2022transport ; ma2023quasi ; ye2022anisotropic ; huang2023magnetic ; li2022coexistence ; chen2021three ; hao2021multiple ; zhou2024origin ; lu2022topologically ; jiao2020topological ; mar1991synthesis ; xiao2022dirac ; jiao2021anisotropic falls into the category of Dirac nodal-line semimetals where the linear band crossing is not limited to a single point but extends along a line in the Brillouin zone. In this work we focus on one representative of this family, namely TaNiTe 5 , and discuss the strongly amplified quantum oscillations in the magnetoresistance presented in a recent publication by the authors daschner2024probing . This strong enhancement suggests the presence of a novel topological signature in Dirac nodal-line semimetals. However, a theoretical model based on classical mechanics and electrodynamics can fully account for this experimental result. A numerical study is also provided and shows good agreement with the empirical data. II Methods Single crystals of TaNiTe 5 were grown with the self-flux growth method. Elements of Ta, Ni, and Te were mixed together with a molar ratio of Ta:Ni:Te = 1:1:10 inside a glove box filled with purified Argon gas. After filling the mixture into a quartz tube and sealing the tube in vacuum, it was then heated to over 973\text{\,}\mathrm{K} over the course of four days and then cooled to 773\text{\,}\mathrm{K} within a week. Similar to its sister compounds, TaNiTe 5 grows in shiny needle shaped layered single crystals. Figure 1: Typical setup of a four-point resistivity measurement of a sample (blue). The gold wires connect the sample with contact pads on a circuit board (green). Voltage (V) and current (I) contact pads from which electronic measurements can be conducted are drawn in grey. An image of a real setup as used in the 9\text{\,}\mathrm{T} -PPMS is shown in Appendix A . The crystallographic axes a , b and c of TaNiTe 5 are aligned with \hat{\textbf{x}} , \hat{\textbf{y}} and \hat{\textbf{z}} , respectively. Measurements shown here were performed in a Quantum Design Physical Property Measurement System (PPMS) with a 14\text{\,}\mathrm{T} magnet (referred to as the 14\text{\,}\mathrm{T} -PPMS), and a PPMS with a 9\text{\,}\mathrm{T} magnet (referred to as the 9\text{\,}\mathrm{T} -PPMS). A typical four-point measurement inside the cryostat is sketched in Figure 1 . The sample is held up by gold wires and thus floating, such that it can freely move if exposed to a force. The only relevant degrees of freedom here are given by the lateral movement in z(t) and a rotational movement in the \hat{\textbf{x}} - \hat{\textbf{y}} plane by an angle \theta(t) . All transport measurement were performed with a SR830 lock-in amplifier. III Experimental Results Figure 2: Magnetoresistance measurement of a TaNiTe 5 sample where I\parallel\hat{\mathbf{x}} and B\parallel\hat{\mathbf{y}} (in Figure 1 ). Data is split into the in-phase (left) and out-of-phase (right) components. This data was measured in a 14\text{\,}\mathrm{T} -PPMS at 1.8\text{\,}\mathrm{K} . Figure 2 shows a measurement of SdH oscillations in a TaNiTe 5 sample, which was performed in a 14\text{\,}\mathrm{T} -PPMS with I parallel to the crystallographic a axis ( \hat{\mathbf{x}} in Figure 1 ) and B parallel to the crystallographic b axis ( \hat{\mathbf{y}} in Figure 1 ). Voltage contacts were not aligned in a straight line and hence a Hall component showed up in the measurement data. The longitudinal resistance R(B) data was corrected for the Hall component by symmetrising via R=\frac{R(B)+R(-B)}{2} (1) Generally, a lock-in amplifier applies a periodic current with a frequency and phase shift that it can use to amplify the measured voltage drop across the sample. The measured signal can be separated into an oscillation that is in phase with the reference signal, and one that is shifted by \pi/2 with respect to the reference signal of the lock-in amplifier, and is thus out of phase. We should expect the vast majority of the input signal to be in phase with the reference signal unless inductive or capacitive effects are present. Figure 2 shows an enhanced signal in these components both of which host strongly amplified quantum oscillations, with the out-of-phase component even obtaining negative values at high magnetic fields. At fields between -9\text{\,}\mathrm{T} to 9\text{\,}\mathrm{T} the resistance in the in-phase component shows semiclassical behaviour, while the out-of-phase component increases quadratically in field. Both components show a drop at fields beyond \pm$9\text{\,}\mathrm{T}$ with continuously increasing quantum oscillations. To investigate the origin of this peculiar effect, the measurements were repeated in the 9\text{\,}\mathrm{T} -PPMS with the same sample, again with I\parallel a and B\parallel b , and the temperature-dependent magnetoresistance defined in terms of longitudinal resistance R(B) \text{MR}=\frac{R(B)-R(0)}{R(0)} (2) is illustrated in Figure 3 . Higher resolution was obtained in this measurement which allowed for the analysis of quantum oscillations. We find frequencies of 53.0(3)\text{\,}\mathrm{T} , 163.0(4)\text{\,}\mathrm{T} and 233(3)\text{\,}\mathrm{T} with effective masses of 0.14(2)\text{\,}\mathrm{\text{$m$}_{\mathrm{e}}} , 0.23(1)\text{\,}\mathrm{\text{$m$}_{\mathrm{e}}} and 0.23(3)\text{\,}\mathrm{\text{$m$}_{\mathrm{e}}} , respectively. The Dingle temperature for the first two frequencies could be determined as 12.9(4)\text{\,}\mathrm{K} and 14.7(3)\text{\,}\mathrm{K} respectively, while the data for the third frequency did not allow for determination of the Dingle temperature. Overall agreement with the literature daschner2024probing ; xu2020anisotropic ; chen2021three ; ye2022anisotropic is good and this data provides evidence of Shubnikov - de Haas oscillations, which so far have only been reported at much higher fields of up to 30\text{\,}\mathrm{T} chen2021three or even up to 50\text{\,}\mathrm{T} xu2020anisotropic . Figure 3: Left: Magnetoresistance of a TaNiTe 5 sample at various temperatures. Total magnetoresistance derived from the in-phase (IP) and out-of-phase (OOP) resistances via {R}=\sqrt{{R}_{\text{IP}}^{2}+{R}_{\text{OOP}}^{2}}

Read the complete text