Experimental demonstration of the clock asynchrony model in space-borne gravitational wave detection

Ming-Yang Xu, Yu-Jie Tan, Ning Ma, Ao-Ting Fang, Yi-Jun Xia, Cheng-Gang Shao · 2025

Read Experimental demonstration of the clock asynchrony model in space-borne gravitational wave detection by Ming-Yang Xu, Yu-Jie Tan, Ning Ma, Ao-Ting Fang, Yi-Jun Xia, Cheng-Gang Shao (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-02286.txt.

Introduction

Ming-Yang Xu and co-authors test a model of clock mismatch for space based gravitational wave detectors, in a 2025 paper. Such detectors fly as separate satellites whose clocks count on their own. Small timing gaps between them can blur the wave signal unless they are modeled and corrected.

The team writes a math model in which the mismatch is dominated by a constant term and a steady drift term. A dual phasemeter setup tests the model in the lab. Post processing cuts the leftover error to a very low level at a key frequency. One ranging method measures the constant term, while a clock link gauges the drift. The study also presents a low noise test system for such checks.

Catalog record

CREATORMing-Yang Xu, Yu-Jie Tan, Ning Ma, Ao-Ting Fang, Yi-Jun Xia, Cheng-Gang Shao
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-02286

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Experimental demonstration of the clock asynchrony model in space-borne gravitational wave detection Ming-Yang Xu, Yu-Jie Tan, Ning Ma, Ao-Ting Fang, Yi-Jun Xia, Cheng-Gang Shao Abstract Space-borne gravitational wave detection will open the observation window in the 0.1 mHz − - 1 Hz bandwidth, playing a crucial role in the development of cosmology and physics. Precise clock synchronization among satellites is essential for the accurate detection of gravitational wave signals. However, the independent clock counting mechanisms of each satellite pose a significant challenge. This work reports the mathematical model of clock asynchrony, which is mainly dominated by the constant term factor and the linear term factor. Moreover, it experimentally verifies the clock asynchronization technique based on a dual-phasemeter system. Through experimentation, the impacts of these two aspects of clock asynchrony were confirmed, and post-processing techniques were employed to reduce these impacts to as low as 2 ​ π × 10 − 6 ​ rad / Hz 1 / 2 ​ @ ​ 3 ​ m ​ H ​ z \rm 2\pi\times 10^{-6}rad/Hz^{1/2}@3mHz . Specifically, the constant term factor is measured by Time-delay Interferometry Ranging (TDIR), while the linear term factor can be gauged by clock transmission link. This study provides a reference for understanding the clock asynchrony mechanism and processing clock synchronization issues. Additionally, a low additional noise clock synchronization test system is introduced to support such measurements. 1 Introduction Space-borne gravitational wave detection will open the observation window in the 0.1 mHz - 1 Hz bandwidth, propelling advancements in cosmology and physics [ 1 , 2 , 3 ] . The typical configuration for detecting gravitational waves involves three spacecraft forming an approximately equilateral triangle, utilizing heterodyne laser interferometers to precisely measure the minute displacement changes caused by passing gravitational waves. Each spacecraft is also equipped with an ultra-stable oscillator (USO) to provide an accurate time reference and record the precise moments of data acquisition. Nevertheless, the fact that each spacecraft has its own independent clock counting mechanism presents a formidable obstacle to achieving clock synchronization among different satellites. This challenge is crucial to overcome as accurate clock synchronization is essential for the precise detection of gravitational wave signals [ 4 ] . Pseudo-random code ranging (PRNR) [ 5 ] and Time-delay interferometry ranging (TDIR) [ 6 ] are currently the two main clock synchronization methods. The former uses a hardware approach to synchronize clocks by comparing the time difference between the transmitted and received pseudo-random codes. The latter uses a post-processing method to synchronize clocks by searching for the lowest noise value of the noise combination at different delays. Experimental verifications related to pseudo-code ranging have demonstrated its excellent ranging performance in weak-light [ 7 ] , bi-directional [ 8 ] , and among three satellites [ 9 ] . Similarly, clock synchronization using the TDIR method has also proven to be a viable and effective approach [ 10 ] . Naturally, prior to implementing these clock synchronization techniques, it is imperative to determine which specific clock signal is to be synchronized. In the context of space-borne gravitational wave detection, the USO is required to generate multiple frequency components. These encompass the Analog-to-Digital Converter (ADC) frequency utilized for ADC data acquisition, the pilot tone frequency employed to mitigate ADC aperture jitter [ 11 , 12 ] , and the modulation frequency for incorporating the noise information of the multiplied clock jitter [ 13 , 14 ] . Previous research [ 15 ] has indicated that the stability of the pilot tone is the primary source of on-board clock jitter noise. Consequently, the jitter noise of the pilot tone is a clock noise source that demands suppression. This can be achieved through techniques such as the clock noise calibrated time-delay interferometry (TDI) technique [ 16 ] , the optical frequency comb TDI technique [ 17 ] , and the sideband arm locking technique [ 18 ] . The pilot tone correction algorithm can effectively suppress ADC sampling clock noise and aperture jitter noise. As a result, the stability of the ADC clock may seem less important. However, as a marking clock, it is crucial to mark the data and provide a precise timing for each data point. Space-borne gravitational wave detection missions are based on a constellation of three satellites. Each satellite is equipped with an independent ADC sampling clock, inevitably introducing the issue of clock asynchronization. Clock asynchronization encompasses two key aspects: the constant deviation caused by the inter-satellite delay and the linear deviation resulting from the difference of the central frequencies of the clocks. Recently, leveraging a hexagonal optical bench [ 20 ] , researchers explored the comprehensive clock asynchronization mechanism among the three satellites [ 19 ] . Based on this, our work further investigates the contributions of both constant and linear terms to clock asynchrony. Theoretically, we derive a coupled noise model that quantifies these terms and establishes synchronization requirements. Experimentally, we verify the impacts of these two terms based on a dual phasemeter system. Emerging research emphasizes the utility of sideband data for transmitting clock information, offering a pathway to enhanced synchronization precision [ 21 ] . To explore this potential, we modulate the pilot tone and the ADC clock under two distinct conditions: homologous (shared source) and non-homologous (independent sources). Our results show that when the ADC clock and the pilot tone are from different sources, one cannot obtain the useful information about clock synchronization, and there is a large amount of clock asynchronization noise in the system. When the ADC clock and the pilot tone are from the same source, one can use the clock comparison information for clock synchronization processing to suppress the clock asynchronization noise in the system. These results can provide a reference for understanding the mechanism of clock asynchrony and the processing of clock synchronization. 2 The noise model and requirements for clock synchronization Figure 1: The configuration of space-borne gravitational wave detector. TM: test mass; OB: optical bench; PM: phasemeter; SC: spacecraft. In space-borne gravitational wave detection, three satellites are deployed, each equipped with an independent USO, as shown in Fig. 1 . Assuming that identical data is collected by each satellite at its respective local time, resulting in the following considerations: \displaystyle f(t_{1})= \displaystyle f(t), (1) \displaystyle f(t_{2})= \displaystyle f(t+t_{2,0}+\alpha_{2}t+\delta t_{2}), \displaystyle f(t_{3})= \displaystyle f(t+t_{3,0}+\alpha_{3}t+\delta t_{3}), where clock 1 serves as the primary clock, t is the clock 1 time, t_{2,0} is the constant initial time offset between clock 1 and clock 2 which primarily arises from the inter-satellite delays and the inherent fixed delay introduced by the disparate hardware components. Additionally, \alpha_{2} is the linear timing factor of clock 2 relative to the clock 1 which is mainly due to the difference in center frequency between clock 2 and clock 1. Lastly, \delta t_{2} primarily reflects the stability of clock 2 itself. The parameters for clock 3 are similar to those for clock 2. When combining data from two satellites, clock asynchronization inevitably leads to the emergence of residual noise. To delve into this issue, we will focus on the constant and linear terms, while disregarding higher-order terms. The Fourier transform is: \displaystyle f(t)-f(t+t_{2,0}+\alpha_{2}t)\to F(\omega)-e^{i\omega t_{2,0}}\frac{1}{1+\alpha_{2}}F(\frac{\omega}{1+\alpha_{2}}) (2) Then, a rough estimation of the clock synchronization requirements

Read the complete text