Ground calibration plan for the Athena/X-IFU microcalorimeter spectrometer

Alexeï Molin, François Pajot, Marc Audard, Marco Barbera, Sophie Beaumont, Edoardo Cucchetti, Matteo d’Andrea, Christophe Daniel, Roland den Hartog, Megan E. Eckart, Philippe Ferrando, Luciano Gottardi, Maurice Leutenegger, Simone Lotti, Lorenzo Natalucci, Philippe Peille, Jelle de Plaa, Etienne Poi · 2025

Read Ground calibration plan for the Athena/X-IFU microcalorimeter spectrometer by Alexeï Molin, François Pajot, Marc Audard, Marco Barbera, Sophie Beaumont, Edoardo Cucchetti, Matteo d’Andrea, Christophe Daniel, Roland den Hartog, Megan E. Eckart, Philippe Ferrando, Luciano Gottardi, Maurice Leutenegger, Simone Lotti, Lorenzo Natalucci, Philippe Peille, Jelle de Plaa, Etienne Poi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-01525.txt.

Introduction

Alexei Molin and co-authors laid out the ground calibration plan for a flagship X-ray spectrometer in a 2025 paper. The instrument will fly on the Athena observatory, set to study the hot and energetic universe in the late 2030s. Its sensor array runs at a twentieth of a degree above absolute zero and resolves X-ray energies to a few electron volts.

Calibration on the ground must pin down every instrument parameter before launch, since no hands will touch it again. The paper lists the governing requirements, the overall strategy, and the sources and steps for each measured trait. Imaging and spectroscopy across a wide energy band are both covered. The authors present the plan as the reference for the instrument team's test campaigns.

Catalog record

CREATORAlexeï Molin, François Pajot, Marc Audard, Marco Barbera, Sophie Beaumont, Edoardo Cucchetti, Matteo d’Andrea, Christophe Daniel, Roland den Hartog, Megan E. Eckart, Philippe Ferrando, Luciano Gottardi, Maurice Leutenegger, Simone Lotti, Lorenzo Natalucci, Philippe Peille, Jelle de Plaa, Etienne Poi
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE55 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-01525

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ground calibration plan for the Athena/X-IFU microcalorimeter spectrometer Alexeï Molin, François Pajot, Marc Audard, Marco Barbera, Sophie Beaumont, Edoardo Cucchetti, Matteo d’Andrea, Christophe Daniel, Roland den Hartog, Megan E. Eckart, Philippe Ferrando, Luciano Gottardi, Maurice Leutenegger, Simone Lotti, Lorenzo Natalucci, Philippe Peille, Jelle de Plaa, Etienne Pointecouteau, Scott Porter, Kosuke Sato, Joern Wilms, Vincent Albouys, Didier Barret, Massimo Cappi, Jan-Willem den Herder, Luigi Piro, Aurora Simionescu Abstract The X-ray Integral Field Unit is the X-ray imaging spectrometer on-board one of ESA’s next large missions, Athena. Athena is set to investigate the theme of the Hot and Energetic Universe, with a launch planned in the late-2030s. Based on a high sensitivity Transition Edge Sensor (TES) detector array operated at very low temperature (50 mK), X-IFU will provide spatially resolved high resolution spectroscopy of the X-ray sky in the 0.2-12 keV energy band, with an energy resolution goal of 4 eV up to 7 keV [3 eV design goal]. This paper presents the current calibration plan of the X-IFU. It provides the requirements applicable to the X-IFU calibration, describes the overall calibration strategy, and details the procedure and sources needed for the ground calibration of each parameter or characteristics of the X-IFU. keywords X-ray instrumentation, Athena/X-IFU, calibration * A. Molin, \linkable [email protected] * *F. Pajot, \linkable [email protected] 1 Introduction Planned for launch in the late-2030s, Athena is ESA’s second next large mission, dedicated to the investigation of the Hot and Energetic Universe by answering two main questions, how large scale structures assembled and evolved to the ones we see today, and how black holes grew and shaped the observable universe. The Athena X-ray telescope, based on a 12 m focal length Silicon Pore Optics (SPO) mirror, will have two focal plane instruments, the X-ray Integral Field Unit (X-IFU) and the Wide Field Imager (WFI) [ 1 , 2 ] . The Athena satellite will be placed at the Lagrange L1 point in the Earth-Sun system. The X-IFU is a microcalorimeter X-ray imaging spectrometer [ 3 ] . Its present design [ 4 ] , which follows the reformulation of the Athena mission into NewAthena, is based on an array of \sim 1500 Transition Edge Sensors (TES) cooled to 55 mK to obtain high spectral resolution images of the sky. Transition Edge Sensors rely on the superconducting transition of a material, a combination of Mo and Au in the case of X-IFU [ 5 , 6 ] , using the steep slope of the resistance of the material as a function of temperature in the transition. The temperature rise caused by the absorption of an X-ray photon on the absorber laying on the TES is read as a decrease in current when the TES is operated under constant voltage. This drop in current is amplified by several stages, using Superconducting Quantum Interference Devices (SQUIDs) [ 7 ] at lower temperature stages and a low noise amplifier, part of the Warm Front End Electronics (WFEE) [ 8 ] at higher temperature. The final stage of the readout is done with the Digital Readout Electronics (DRE) [ 9 ] . The TES properties, such as geometry, materials, electrical and thermal couplings are optimized for the best performances in the soft X-ray energy band, 0.2-12 keV. In order to minimize the thermal load of the system at the lowest temperature stage, the readout is multiplexed, using Time Division Multiplexing (TDM) [ 10 , 11 ] . The X-IFU instrument is developed by an instrument consortium composed of more than 50 laboratories or institutions in 12 countries, it is led by IRAP and under CNES technical management. The ground calibration plan, elaborated by the X-IFU Calibration Team (XCaT), takes as input the calibration requirements set at instrument level, deriving from the Athena requirements. It defines the strategy of the measurements to be performed and plans the resources needed, including time, both on ground and in-flight. Among parameters that need to be calibrated, we detail here the strategy that is proposed for five critical quantities : the energy resolution, quantified by the Full Width at Half Maximum (FWHM) of the gaussian core of the Line Spread Function (LSF), the energy scale, relating the pulse height amplitude (PHA) of a pulse to the energy of the incoming photon, and the instrument efficiency (QE), defined as the fraction of incoming photons which end up as detected events. To these quantities, two are added, the background knowledge, which is the expected background level during the observing time in flight, and the timing calibration, which quantifies the error in the timing of detected events. The following calibration plan inherits substantially from the Hitomi/SXS and XRISM/Resolve intruments calibrations [ 12 , 13 , 14 , 15 , 16 ] . Hitomi was a JAXA mission carrying three instruments on board, among which SXS, a 6x6 pixels microcalorimeter spectrometer, relying on high impedance thermometers [ 17 ] . The XRISM mission [ 18 ] was developed and successfully launched in 2023 to recover the premature termination of the Hitomi mission. It carries on-board the Resolve instrument, similar to SXS. Since X-IFU also relies on a low temperature microcalorimeter array, an important fraction of its calibration will be based on the knowledge and experience acquired and the hardware developed during the calibrations of SXS and Resolve. We first recall the requirement for the calibration of X-IFU in Sect. 2 . In Sect. 3 we outline the calibration strategy, expanding on the energy scale calibration in Sect. 3.2 , the energy resolution in Sect. 3.3 , the instrument efficiency in Sect. 3.4 , the background knowledge in Sect. 3.5 and the timing calibration in Sect. 3.6 . Finally we provide the specifications and a description of the sources required for the calibration in Sect. 4 . 2 Calibration requirements In Table 1 we present the requirements for the calibration of X-IFU. The values given refer to the maximum allowed error on the given parameter knowledge. In flight, because of Poisson statistics, different events in the same pixels will not be processed the same way and will receive different “grades” (as many as 6 grading options are considered for now). Throughout this paper, we only address high resolution events, labeled as ’high grade’. The instrument efficiency refers to the probability to detect a photon arriving at the instrument entrance over the entire energy band, which is measured per sub-system. Within the X-IFU requirements, the so-called absolute calibration refers to the knowledge of the average instrument efficiency over the field of view for the specified energy range. The relative calibration refers to the maximum allowed error on the difference in spectral shape across all energies and across the array. Table 1: Summary of the in-flight calibrations requirements for X-IFU. Element Knowledge Applicability Comment Energy scale High Grade events 0.65 eV (goal 0.5 eV) 0.2 - 7 keV 1\sigma of residuals over 5 ks calibration period Energy resolution High Grade events 6% of high grade FWHM resolution 0.2 - 12 keV 1\sigma of residuals Instrument efficiency Absolute cal. 4% 0.2 - 12 keV 1\sigma of residuals Same for each pixel of the array Relative cal. 3% of IE or 0.01 when IE < 0.33 0.2 - 12 keV At

Read the complete text