Cosmology and Source Redshift Constraints from Galaxy Clustering and Tomographic Weak Lensing with HSC Y3 and SDSS using the Point-Mass Correction Model

Tianqing Zhang, Xiangchong Li, Sunao Sugiyama, Rachel Mandelbaum, Surhud More, Roohi Dalal, Arun Kannawadi, Hironao Miyatake, Atsushi J. Nishizawa, Takahiro Nishimichi, Masamune Oguri, Ken Osato, Markus M. Rau, Masato Shirasaki, Tomomi Sunayama, Masahiro Takada · 2025

Read Cosmology and Source Redshift Constraints from Galaxy Clustering and Tomographic Weak Lensing with HSC Y3 and SDSS using the Point-Mass Correction Model by Tianqing Zhang, Xiangchong Li, Sunao Sugiyama, Rachel Mandelbaum, Surhud More, Roohi Dalal, Arun Kannawadi, Hironao Miyatake, Atsushi J. Nishizawa, Takahiro Nishimichi, Masamune Oguri, Ken Osato, Markus M. Rau, Masato Shirasaki, Tomomi Sunayama, Masahiro Takada (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-01386.txt.

Introduction

Combining maps of where galaxies cluster with measurements of weak lensing, the slight bending of light by dark matter, gives a strong test of cosmology. Tianqing Zhang and co-authors join two surveys: Sloan galaxies trace the matter, while the Hyper Suprime-Cam year three data supply the lensed background galaxies, split into four distance slices. A point mass correction model lets them use lensing signals on smaller scales than usual, which sharpens the measurement.

Fitting a standard cosmology model, they find a value for the clumpiness of matter, called S8, of about 0.78. Allowing dark energy to vary gives a slightly lower value, with a dark energy parameter near minus 1.18. The team also let the data correct the distance estimates for the far slices on their own, and the corrections matched earlier results from the same survey.

Catalog record

CREATORTianqing Zhang, Xiangchong Li, Sunao Sugiyama, Rachel Mandelbaum, Surhud More, Roohi Dalal, Arun Kannawadi, Hironao Miyatake, Atsushi J. Nishizawa, Takahiro Nishimichi, Masamune Oguri, Ken Osato, Markus M. Rau, Masato Shirasaki, Tomomi Sunayama, Masahiro Takada
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE101 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-01386

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Cosmology and Source Redshift Constraints from Galaxy Clustering and Tomographic Weak Lensing with HSC Y3 and SDSS using the Point-Mass Correction Model Tianqing Zhang, Xiangchong Li, Sunao Sugiyama, Rachel Mandelbaum, Surhud More, Roohi Dalal, Arun Kannawadi, Hironao Miyatake, Atsushi J. Nishizawa, Takahiro Nishimichi, Masamune Oguri, Ken Osato, Markus M. Rau, Masato Shirasaki, Tomomi Sunayama, Masahiro Takada Abstract The combination of galaxy clustering and weak lensing is a powerful probe of the cosmology model. We present a joint analysis of galaxy clustering and weak lensing cosmology using SDSS data as the tracer of dark matter (lens sample) and the HSC Y3 dataset as source galaxies. The analysis divides HSC Y3 galaxies into four tomographic bins for both galaxy-galaxy lensing and cosmic shear measurements, and employs a point-mass correction model to utilize galaxy-galaxy lensing signals down to 2 h − 1 h^{-1} Mpc, extending up to 70 h − 1 h^{-1} Mpc. These strategies enhance the signal-to-noise ratio of the galaxy-galaxy lensing data vector. Using a flat Λ \Lambda CDM model, we find S 8 = 0.780 − 0.030 + 0.029 S_{8}=0.780^{+0.029}_{-0.030} , and using a w w CDM model, we obtain S 8 = 0.756 − 0.036 + 0.038 S_{8}=0.756^{+0.038}_{-0.036} with w = − 1.176 − 0.346 + 0.310 w=-1.176^{+0.310}_{-0.346} . We apply uninformative priors on the redshift mean-shift parameters for the third and fourth tomographic bins. Leveraging the self-calibration power of tomographic weak lensing, we measure Δ ​ z 3 = − 0.112 − 0.049 + 0.046 \Delta z_{3}=-0.112^{+0.046}_{-0.049} and Δ ​ z 4 = − 0.185 − 0.081 + 0.071 \Delta z_{4}=-0.185^{+0.071}_{-0.081} , in agreement with previous HSC Y3 results. This demonstrates that weak lensing self-calibration can achieve redshift constraints comparable to other methods such as photometric and clustering redshift calibration. I Introduction The standard cosmological model describes a universe composed of regular (baryonic) matter, dark matter, and dark energy. Together, regular and dark matter account for approximately 30% of the total energy density, while dark energy makes up the remaining 70% Planck Collaboration et al. 2020 ; Abbott et al. 2022 ; Adame et al. 2025 . Dark matter and baryons drive the growth of large-scale structures, forming gravitationally bound dark matter halos in which galaxies form and evolve. In contrast, dark energy causes the accelerated expansion of the universe Riess et al. 2019 ; Scolnic et al. 2018 , which pushes galaxies and large-scale structures apart over cosmic time. Such a cosmological model can be described using fewer than a dozen parameters, several of which are tightly constrained by measurements of galaxy clustering and weak gravitational lensing Hu 1999 ; Dodelson and Schmidt 2020 , due to their sensitivity to the matter power spectrum across different epochs. Galaxy clustering assumes that galaxies trace the underlying dark matter distribution with a bias, making the galaxy power spectrum a biased probe of the matter power spectrum. Weak gravitational lensing, on the other hand, leverages the deflection of light from background (source) galaxies to measure the projected matter distribution along the line of sight to foreground structures Kilbinger 2015 ; Mandelbaum 2018 . By correlating the shapes of galaxy pairs at a given angular separation—referred to as cosmic shear – one measures the integrated lensing effect caused by large-scale structure in the foreground Amon et al. 2022 ; Secco et al. 2022 ; Li et al. 2023 ; Dalal et al. 2023 ; Wright et al. 2025 . Correlation of the shapes of source galaxies with the positions of foreground (lens) galaxies – known as galaxy-galaxy lensing – probes the average projected matter density around those lens galaxies Prat et al. 2018 ; Miyatake et al. 2022 . Galaxy clustering, galaxy-galaxy lensing, and cosmic shear each depend differently on galaxy bias. Therefore, a joint analysis of these three two-point correlation functions helps break the degeneracy between galaxy bias and the amplitude of the matter power spectrum. This combined approach is commonly referred to as the “three-by-two-point” (3×2pt) analysis Abbott et al. 2022 ; Sugiyama et al. 2023 ; Miyatake et al. 2023 ; van Uitert et al. 2018 . As previously mentioned, matter drives the formation of large-scale structure through gravitational attraction, while dark energy causes the accelerated expansion of space-time. As a result, the matter power spectrum evolves over cosmic time. To observe this evolution, both galaxy tracers and source galaxies must be divided into redshift “slices”, or tomographic bins Hu 1999 . Specifically, galaxy clustering in a given tomographic bin probes the matter power spectrum within that redshift range; galaxy-galaxy lensing measures the projected matter profile around lens galaxies at those redshifts; and cosmic shear captures the cumulative lensing effect from all large-scale structures in front of the source galaxies Dodelson and Schmidt 2020 . Using tomographic source bins in galaxy-galaxy lensing provides additional self-calibration power on the mean redshift of the source galaxies. Since previous analysis based on HSC Y3 shear catalog found inconsistent redshift parameter from the cosmological analysis to the photo- z redshift distribution, we utilize this self-calibration power to provide redshift parameter constraints for the third and fourth HSC bins. Furthermore, employing multiple source bins improves the signal-to-noise ratio of the galaxy-galaxy lensing measurement by increasing the number of tomographic lens–source bin pairs available. In this work, a sample of SDSS DR11 galaxies is used as tracers of large-scale structure in the redshift range 0.15<z_{l}<0.7 . These galaxies also serve as the lens sample in the galaxy-galaxy lensing measurement and are divided into three tomographic bins. The HSC Y3 source galaxies, covering an area of 419 deg 2 , are divided into four tomographic bins spanning 0.3<z_{s}<1.5 . The binning scheme of the source galaxies here is identical to that used in the HSC Y3 cosmic shear analysis Li et al. 2023 ; Dalal et al. 2023 . The clustering measurements of the SDSS galaxies are taken from More et al. More et al. 2023 , and the tomographic galaxy-galaxy lensing measurements are adapted from Zhang and Sugiyama 2025 , which also established the 2\times 2 pt analysis framework combining galaxy clustering and galaxy-galaxy lensing. The cosmic shear measurements are consistent with those in Li et al. 2023 , although a different multiplicative factor is applied for blinding purposes. Details of the 3\times 2 pt data vector and its covariance matrix are provided in Section II . The theoretical forward model generates predicted 3\times 2 pt data vectors to constrain cosmological and nuisance parameters via Markov Chain Monte-Carlo (MCMC) sampling. Most of the theoretical modeling used in this work follows Sugiyama et al. 2023 and Zhang and Sugiyama 2025 . We compute the nonlinear matter power spectrum with a single parameter controlling the strength of baryonic feedback. A single galaxy bias parameter is used to model the galaxy clustering signal w_{p} , and an additional point-mass correction parameter is introduced to account for small-scale modeling uncertainties in \Delta\Sigma(R_{p}) . For intrinsic alignment, we adopt the tidal alignment and tidal torquing model. Each tomographic bin of the source galaxies is assigned one nuisance parameter for residual multiplicative shear bias, redshift bias, and PSF systematics. We perform likelihood analyses on the full data vector as well as on its subsets to test internal consistency. Details of

Read the complete text