Adiabatic Capacitive Neuron: An Energy-Efficient Functional Unit for Artificial Neural Networks PubID: pubid: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.

Sachin Maheshwari, Mike Smart, Himadri Singh Raghav, Themis Prodromakis, Alexander Serb · 2025

Read Adiabatic Capacitive Neuron: An Energy-Efficient Functional Unit for Artificial Neural Networks PubID: pubid: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. by Sachin Maheshwari, Mike Smart, Himadri Singh Raghav, Themis Prodromakis, Alexander Serb (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-00831.txt.

Introduction

Sachin Maheshwari and co-authors present an adiabatic capacitive neuron, a hardware unit for artificial neural networks built to save energy. Their twelve-bit neuron handles positive and negative weights and was laid out in 0.18 micrometre CMOS technology. A new threshold logic design gives the binary activation step a low, balanced offset across process corners and wide temperatures.

In post-layout simulations, the new logic cut offset and used slightly less energy than the standard design. The full neuron saved more than ninety percent of synapse energy against a non-adiabatic benchmark across a broad frequency range. Monte Carlo runs with process variation kept the worst-case saving above ninety percent, and voltage scaling held the gain.

Catalog record

CREATORSachin Maheshwari, Mike Smart, Himadri Singh Raghav, Themis Prodromakis, Alexander Serb
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE53 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2507-00831

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Adiabatic Capacitive Neuron: An Energy-Efficient Functional Unit for Artificial Neural Networks PubID: pubid: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. Sachin Maheshwari, Mike Smart, Himadri Singh Raghav, Themis Prodromakis, Alexander Serb Abstract This paper introduces a new, highly energy-efficient, Adiabatic Capacitive Neuron (ACN) hardware implementation of an Artificial Neuron (AN) with improved functionality, accuracy, robustness and scalability over previous work. The paper describes the implementation of a 12-bit single neuron, with positive and negative weight support, in an 0.18 ​ μ ​ 𝐦 \mathbf{0.18\mu m} CMOS technology. The paper also presents a new Threshold Logic (TL) design for a binary AN activation function that generates a low symmetrical offset across three process corners and five temperatures between − 55 o -55^{o} C and 125 o 125^{o} C. Post-layout simulations demonstrate a maximum rising and falling offset voltage of 9 m ​ V mV compared to conventional TL, which has rising and falling offset voltages of 27 m ​ V mV and 5 m ​ V mV respectively, across temperature and process. Moreover, the proposed TL design shows a decrease in average energy of 1.5 % \% at the SS corner and 2.3 % \% at FF corner compared to the conventional TL design. The total synapse energy saving for the proposed ACN was above 90 % \% (over 12x improvement) when compared to a non-adiabatic CMOS Capacitive Neuron (CCN) benchmark for a frequency ranging from 500 k ​ H ​ z kHz to 100 M ​ H ​ z MHz . A 1000-sample Monte Carlo simulation including process variation and mismatch confirms the worst-case energy savings of 90 % \% compared to CCN in the synapse energy profile. Finally, the impact of supply voltage scaling shows consistent energy savings of above 90 % \% (except all zero inputs) without loss of functionality. I Introduction Adiabatic Logic (AL) is a charge recovery design technique that operates with a gradually alternating AC power supply that periodically returns capacitive charge to the supply [ 1 ] . This significantly differs from traditional, non-adiabatic, CMOS solutions that use a fixed DC supply. Appreciating the complexities of designing an energy-efficient AC power supply [ 2 , 3 , 4 , 5 ] , previous AL work has successfully demonstrated the potential for significant energy savings [ 6 , 7 , 8 , 9 , 10 , 11 , 12 ] and has been actively researched, including integration with other low-power techniques and emerging devices [ 13 , 14 ] . As such, AL techniques are ideal for the implementation of power-hungry Artificial Neural Networks (ANNs). This includes capacitive ANN solutions [ 15 , 16 , 17 ] and, most recently, with emerging memcapacitor configurable devices [ 18 ] . The simplest mathematical model of an artificial neuron is comprised of a vector dot-product between a number of input signals and a corresponding set of weights (or synapses ) [ 19 ] followed by a non-linear activation function [ 20 ] . The neuron output can then act as an input to other ANs in a multi-layer, multi-AN network. In digital hardware, this translates to large numbers of power-hungry multiply-accumulate operations. Optimizing artificial neurons and synapses for energy is therefore a key target for building efficient artificial intelligence systems. Fig. 1 : N-bit Dual Tree Single Clock (DTSC) ACN design. The design consists of two sections: a capacitive synapse with SPDT switches and the threshold logic. Substantial work has been done on the implementation of synapses in hardware using devices such as resistors, MOSFETs, sink or source DC currents, and capacitors [ 21 , 22 , 23 , 24 ] . Out of these, capacitive solutions are the most desirable because of their flexibility in fabrication technology, simple sensing, reduced sensitivity to process variations compared to active devices and high energy efficiency. Over the years, many switched-capacitor (SC) neural networks have been proposed to perform computations, such as the analog dot product, instead of using traditional digital methods [ 25 , 26 ] . The earliest implementation demonstrated energy efficiency at the expense of increased complexity [ 27 ] . Another work presented a fully synchronous SC-based self-organizing analog neural network with a winner-take-all circuit, capable of computing the AN dot product [ 28 ] . Further SC implementations include a differential comparator-based charge redistribution design with symmetric capacitor banks on either side [ 29 ] . This configuration offers better stability but dissipates energy by transferring charge from the supply to ground during each reset. Capacitor leakage over time further degrades functionality and increases energy consumption. Using a sinusoidal AC supply with energy recovery via charge transfer could potentially mitigate leakage losses. In parallel with SC and AL developments, there has also been significant recent research into Binary Neural Networks (BNNs) that use neurons with binary inputs and activation functions [ 30 ] . Work in this area has been driven by the desire for fast and low-resource (memory) AN implementations in digital hardware. Consequently, BNNs are trained with binary, ternary, or heavily quantized, positive and negative-valued weights for optimal storage and efficient computation. Researchers have shown that BNNs with more neurons can match the classification performance of state-of-the-art ReLU-based ANNs on datasets like MNIST and CIFAR-10 [ 31 ] . Novel AL-based SC hardware with binary I/O neurons is therefore well-suited for BNNs. This paper introduces a complete and highly energy-efficient analog implementation of an AN. This includes a novel adiabatic differential switched-capacitor architecture, integrated with a pMOS-based Threshold Logic (TL) circuit, as illustrated in Fig. 1 . This is an improved architecture compared to the Adiabatic Capacitive Artificial Neuron (ACAN) introduced in the author’s previous work [ 32 ] . In this next-generation design, functional support for both real-valued positive and negative weights is introduced, susceptibility to variations in the adiabatic power clock is significantly reduced and the accuracy of the binary threshold logic is improved via a new low offset TL circuit. Finally, the paper discusses the benefits of the highly scalable properties of the new design and compares it with a purely CMOS-based equivalent solution. The paper is structured as follows: Section II presents an overview of the proposed architecture, operational principle, and working of the individual logic blocks. The hardware implementation and physical layout of the circuit are discussed in Section III . Section IV demonstrates the results of post-layout simulation and statistical analysis for a commercially available \mathbf{0.18\mu m} CMOS technology and compares the proposed ACN with ACN using conventional TL and CCN designs. Finally, the conclusion is presented in Section V . (a) (b) (c) Fig. 2 : (a) A single capacitive SPDT synapse switch showing synapse capacitor, {C_{i}} , along with bias capacitor, {C_{b}} , ballast capacitor, {C_{d}} , and the bias voltage, {V_{B}} . (b) Transistor-level diagram for a single capacitive SPDT synapse switch with synapse and ballast capacitances. (c) Power clock sinusoidal voltage wave showing the two operational modes and working phases. II Adiabatic Capacitive Neuron: Design Overview This paper considers an artificial neuron with a Heaviside activation function that has N binary inputs, x_{i} where

Read the complete text