Parallel Transmission Aware Co-Design: Enhancing Manipulator Performance Through Actuation-Space Optimization
Rohit Kumar, Melya Boukheddimi, Dennis Mronga, Shivesh Kumar, Frank Kirchner · 2025
Read Parallel Transmission Aware Co-Design: Enhancing Manipulator Performance Through Actuation-Space Optimization by Rohit Kumar, Melya Boukheddimi, Dennis Mronga, Shivesh Kumar, Frank Kirchner (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2507-00644.txt.
Introduction
Rohit Kumar and co-authors present a joint design method for robot arms with parallel belt drives. Their 2025 work notes that build design and motion tuning are usually done apart, which caps performance. Most joint methods also assume a simple chain form and skip parallel links.
The new frame folds parallel coupling rules into the arm's dynamic model. An outer loop tunes gear ratios for the parallel drives. An inner loop plans motion in the drive space, which uses the arm's full dynamic range. Against a joint method built on the simple chain form, the new approach lifts dynamic load capacity by a large margin. The authors credit the drive-space view for the gain.
Catalog record
| CREATOR | Rohit Kumar, Melya Boukheddimi, Dennis Mronga, Shivesh Kumar, Frank Kirchner |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2507-00644
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Parallel Transmission Aware Co-Design: Enhancing Manipulator Performance Through Actuation-Space Optimization Rohit Kumar, Melya Boukheddimi, Dennis Mronga, Shivesh Kumar, Frank Kirchner Abstract In robotics, structural design and behavior optimization have long been considered separate processes, resulting in the development of systems with limited capabilities. Recently, co-design methods have gained popularity, where bi-level formulations are used to simultaneously optimize the robot design and behavior for specific tasks. However, most implementations assume a serial or tree-type model of the robot, overlooking the fact that many robot platforms incorporate parallel mechanisms. In this paper, we present a novel co-design approach that explicitly incorporates parallel coupling constraints into the dynamic model of the robot. In this framework, an outer optimization loop focuses on the design parameters, in our case the transmission ratios of a parallel belt-driven manipulator, which map the desired torques from the joint space to the actuation space. An inner loop performs trajectory optimization in the actuation space, thus exploiting the entire dynamic range of the manipulator. We compare the proposed method with a conventional co-design approach based on a simplified tree-type model. By taking advantage of the actuation space representation, our approach leads to a significant increase in dynamic payload capacity compared to the conventional co-design implementation. I Introduction Parallel mechanisms are increasingly used in various types of robots due to their superior stiffness, accuracy and payload capacity (see [ 1 ] for a survey). In humanoid robots and highly dynamic manipulators, parallel mechanisms can achieve proximal actuation to reduce link inertias. While many humanoid systems use four-bar mechanisms [ 2 ] , belt transmissions have also become a popular choice [ 3 , 4 , 5 ] . A notable example is the MIT humanoid leg, which employs a parallel belt transmission to achieve efficient force transmission while maintaining a compact and lightweight design [ 3 ] . However, such mechanisms introduce complex coupled constraints that challenge conventional modeling and optimization techniques. The inherent complexity of mechanical couplings in these mechanisms pose a considerable challenge to system designers, a fact that advocates a simultaneous optimization of robot design and behavior. This method, commonly referred to as co-design, offers a promising way to fully exploit a robot’s potential. This is especially true for parallel mechanisms, as they encompass a much larger design space than serial robots. Figure 1: Illustration of the Manipulator lifting 3kg payload (in 1 \rightarrow 4 sequence) through Parallel Transmission Aware Co-Design A large body of work on co-design of robotic systems already exists. The work presented in [ 6 ] shows the co-optimization of a humanoid robot using a combination of reinforcement learning (RL) and evolutionary optimization. Similar approaches have been applied to quadrupedal robots [ 7 , 8 , 9 ] , primarily focusing on optimizing link lengths. Some recent works [ 10 , 11 ] have studied co-design of simple underactuated systems taking into account the robustness of the controllers. In contrast, the work in [ 12 ] demonstrates a bi-level optimization of the workspace of a manipulator, including the dimensions of the links and their dynamic properties as well as the choice of actuators. In [ 13 ] , the authors present methods for the co-design of robots with variable stiffness actuators. [ 14 ] studies the design optimization of a parallel manipulator for surgical applications taking into account only its kinematic properties. [ 15 ] presents a computational framework but focuses on link lengths to optimize design and motion trajectories of robotic systems via implicit function theorem. Common to almost all the aforementioned co-design approaches discussed above is that they can only be applied to serial or tree-type robot architectures. If parallel sub-mechanisms exist in a robot, the given approaches will have to rely on serial abstraction of the robot model, which hides the details of the parallel mechanisms. Therefore, they cannot exploit the full dynamics and workspace of a robot with parallel mechanisms and ignore the dynamic effects caused by the closed-loop couplings. This limitation highlights the need for co-design approaches that explicitly account for the dynamic effects and unique constraints of parallel and series-parallel hybrid mechanisms, ensuring a more accurate and efficient optimization process. Contribution The main contribution of this work is a novel co-design method that considers the overall dynamics of a series-parallel hybrid robot taking into account the effect of its parallel transmissions. In contrast to existing approaches that rely on serial or tree-type robot models, our approach performs motion optimization directly in the actuation space of the robot. This allows it to fully exploit the available solution space of the robot, resulting in a dynamically more efficient design. We evaluate our method on a 4-DOF manipulator with parallel belt transmissions [ 5 ] , which is supposed to perform a pick-and-place movement as shown in Fig. 1 . The selected design parameters comprise the transmission ratios of the parallel belt couplings. The experimental evaluation shows that the resulting robot design offers a significantly higher payload capacity compared to conventional co-design approaches. Organization This paper is organized as follows: Section II provides the mathematical background of the proposed method. Section III details the proposed co-design methodology. Section IV presents and discusses the experimental results. Finally, Section V concludes the paper and outlines potential directions for future work based on our findings. II Mathematical Preliminaries This section presents the mathematical basics required for modeling rigid body systems with and without parallel couplings or kinematic constraints. II-A Equations of Motion For a robotic system with closed-loop or parallel coupling constraints, the equations of motion (EoM) can be expressed in both joint space and actuation space [ 16 , 17 ] . The joint space formulation is: \mathbf{H}\ddot{\mathbf{q}}+\mathbf{C}(\mathbf{q},\dot{\mathbf{q}})=\mathbf{\tau} (1) where, \mathbf{q,\dot{q},\ddot{q}}\in\mathbb{R}^{n} are position, velocity, and acceleration of the independent joints, n is the number of independent joints, \mathbf{H(q)}\in\mathbb{R}^{n\times n} is the mass-inertia matrix, \mathbf{C(q,\dot{q})}\in\mathbb{R}^{n} describes the Coriolis-centrifugal effects and gravity forces, and \mathbf{\tau}\in\mathbb{R}^{n} are the joint torques or forces. The mapping from joint space to actuation space is given by: \displaystyle\mathbf{q}_{u}=\gamma(\mathbf{q}) (2) \displaystyle\dot{\mathbf{q}}_{u}=\mathbf{G}\dot{\mathbf{q}} (3) \displaystyle\ddot{\mathbf{q}}_{u}=\mathbf{G}\ddot{\mathbf{q}}+\mathbf{g}_{u} (4) where \gamma(\mathbf{q}) is a function of joint space positions, mapping them to actuation space and \mathbf{g}_{u}=\dot{\mathbf{G}}\dot{\mathbf{q}} . In our case, there is an explicit constraint matrix \mathbf{G}\in\mathbb{R}^{n\times m} that describes the mapping from joint to actuation space, so \mathbf{q}_{u}=\mathbf{G}\mathbf{q}\in\mathbb{R}^{m} , where m is the number of actuators. Substituting these equations in ( 1 ), we arrive at the actuation space EoM: \displaystyle\mathbf{G}^{-T}\mathbf{H}\mathbf{G}^{-1}\mathbf{\ddot{q}}_{u}+\mathbf{G}^{-T}(\mathbf{C}-\mathbf{HG}^{-1}\mathbf{g}_{u}) \displaystyle= \displaystyle\mathbf{G}^{-T}\mathbf{\tau} (5) \displaystyle\mathbf{H}_{u}\mathbf{\ddot{q}}_{u}+\mathbf{C}_{u} \displaystyle= \displaystyle\mathbf{\tau}_{u} (6) where \mathbf{\tau}_{u}=\mathbf{G}^{-T}\mathbf{\tau}\in\mathbb{R}^{m} are the actuator forces and torques, \mathbf{H}_{u}=\mathbf{G}^{-T}\mathbf{HG}^{-1}\in\mathbb{R}^{m\times m} is the mass-inertia matrix in actuation space, and \mathbf{C}_{u}=\mathbf{G}^{-T}(\mathbf{C}-\mathbf{HG}^{-1}\mathbf{g}_{u})\in\mathbb{R}^{m\times m} contains the Coriolis-centrifugal effects and gravity forces in actuation space. II-B Optimal Control Formulation A robot’s movement can be formulated as an optimal control (OC) problem, discretized over time. Equation 7 defines the optimization problem considered in this work. \displaystyle\min_{\mathbf{x},\mathbf{u}} \displaystyle\sum_{k=0}^{N-1}\left(\mathbf{x}_{k}^{T}\mathbf{Q}\mathbf{x}_{k}+\mathbf{u}_{k}^{T}\mathbf{R}\mathbf{u}_{k}+\rho_{k}\|\mathbf{c}(\mathbf{x}_{k})\|^{2}\right) (7) \displaystyle\text{s.t.} \displaystyle\mathbf{x}_{k+1}=\mathbf{f}(\mathbf{x}_{k},\mathbf{u}_{k}),\quad k=0,\dots,N-1 \displaystyle\mathbf{q}_{\min}\leq\mathbf{q}_{k}\leq\mathbf{q}_{\max},\quad\text{(Joint limits)} \displaystyle\dot{\mathbf{q}}_{\min}\leq\dot{\mathbf{q}}_{k}\leq\dot{\mathbf{q}}_{\max},\quad\text{(Velocity limits)} \displaystyle\mathbf{u}_{\min}\leq\mathbf{u}_{k}\leq\mathbf{u}_{\max},\quad\text{(Torque limits)} \displaystyle\mathbf{x}_{0}=\mathbf{x}_{\text{init}},\quad\text{(Initial state constraint)} \displaystyle\mathbf{x}_{N}=\mathbf{x}_{\text{final}},\quad\text{(Final state constraint)} where \mathbf{x}=[\mathbf{q,\dot{q}}]^{T}\in\mathbb{R}^{2n} corresponds to the robot state, \mathbf{Q}^{2n\times 2n} and \mathbf{R}^{2n\times 2n} are diagonal weight matrices associated with the state and control regularization, respectively, \mathbf{f} represents the discretized dynamics and \mathbf{c}(\mathbf{x}) imposes Cartesian boundary constraints for all node points as a cost, where \mathbf{\rho} is the corresponding weighting factor. In this