Spectroscopy of drive-induced unwanted state transitions in superconducting circuits
W. Dai*, S. Hazra*, D. K. Weiss*, P. D. Kurilovich, T. Connolly, H. K. Babla, S. Singh, V. R. Joshi, A. Z. Ding, P. D. Parakh, J. Venkatraman, X. Xiao, L. Frunzio, M. H. Devoret · 2025
Read Spectroscopy of drive-induced unwanted state transitions in superconducting circuits by W. Dai*, S. Hazra*, D. K. Weiss*, P. D. Kurilovich, T. Connolly, H. K. Babla, S. Singh, V. R. Joshi, A. Z. Ding, P. D. Parakh, J. Venkatraman, X. Xiao, L. Frunzio, M. H. Devoret (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-24070.txt.
Introduction
Dai and co-authors hunt the accidents that microwave drives cause inside superconducting qubits, in a 2025 paper. Drives run every operation, but push them harder and the qubit jumps where it should not, capping speed and fidelity. The team swept drives across nine gigahertz on a fixed-frequency qubit and sorted every unwanted jump they found. Three families emerged.
Some jumps trade energy with parasitic defects the drive drags into resonance. Some are multi-photon leaps to off-limits states written into the circuit itself. Some scatter energy into stray modes or defects. Simulation predicted the non-defect families faithfully. The authors offer fixes: smarter drive frequencies and cleaner circuit design.
Catalog record
| CREATOR | W. Dai*, S. Hazra*, D. K. Weiss*, P. D. Kurilovich, T. Connolly, H. K. Babla, S. Singh, V. R. Joshi, A. Z. Ding, P. D. Parakh, J. Venkatraman, X. Xiao, L. Frunzio, M. H. Devoret |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 103 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-24070
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Spectroscopy of drive-induced unwanted state transitions in superconducting circuits W. Dai*, S. Hazra*, D. K. Weiss*, P. D. Kurilovich, T. Connolly, H. K. Babla, S. Singh, V. R. Joshi, A. Z. Ding, P. D. Parakh, J. Venkatraman, X. Xiao, L. Frunzio, M. H. Devoret Abstract Microwave drives are essential for implementing control and readout operations in superconducting quantum circuits. However, increasing the drive strength eventually leads to unwanted state transitions which limit the speed and fidelity of such operations. In this work, we systematically investigate such transitions in a fixed-frequency qubit subjected to microwave drives spanning a 9 GHz frequency range. We identify the physical origins of these transitions and classify them into three categories. (1) Resonant energy exchange with parasitic two-level systems, activated by drive-induced ac-Stark shifts, (2) multi-photon transitions to non-computational states, intrinsic to the circuit Hamiltonian, and (3) inelastic scattering processes in which the drive causes a state transition in the superconducting circuit, while transferring excess energy to a spurious electromagnetic mode or two-level system (TLS) material defect. We show that the Floquet steady-state simulation, complemented by an electromagnetic simulation of the physical device, accurately predicts the observed transitions that do not involve TLS. Our results provide a comprehensive classification of these transitions and offer mitigation strategies through informed choices of drive frequency as well as improved circuit design. I Introduction Superconducting circuits have emerged as one of the leading platforms for quantum information processing, owing to their scalable architectures, flexible designs, and direct compatibility with microwave-based control and measurement systems Wallraff et al. 2004 ; Schuster et al. 2007 . In this architecture, the Josephson junction provides the essential nonlinearity, while microwave drives underpin a broad range of operations, including qubit stabilization, manipulation, and measurement. At the level of physical qubits, microwave drives Rigetti and Devoret 2010 ; Chow et al. 2010 ; Ding et al. 2023a ; Mundada et al. 2020 ; Levine et al. 2024 are essential for implementing high-fidelity single- and two-qubit gates Li et al. 2023 ; Ding et al. 2023b ; Li et al. 2024 ; Rower et al. 2024 , and for executing various readout protocols such as dispersive readout Swiadek et al. 2024 , longitudinal readout Didier et al. 2015 , conditional displacement readout Touzard et al. 2019 , and cat-quadrature readout Grimm et al. 2020 . These control and readout operations form the basis of all discrete variable quantum error correction codes Krinner et al. 2022 ; Google Quantum AI 2023 . Microwave drives also enable a broad set of capabilities for bosonic quantum error correction Gottesman et al. 2001 ; Michael et al. 2016 . They are central to cavity control Gao et al. 2019 ; Eickbusch et al. 2022 ; Chapman et al. 2023 ; Ding et al. 2025 , the realization of error-corrected quantum memories Ofek et al. 2016 ; Hu et al. 2019 ; Campagne-Ibarcq et al. 2020 ; Gertler et al. 2021 ; Sivak et al. 2023 ; Lemonde et al. 2024 ; Brock et al. 2025 , and the stabilization of logical qubits using techniques such as reservoir engineering Leghtas et al. 2015 ; Lescanne et al. 2020 and Hamiltonian engineering Grimm et al. 2020 ; Hajr et al. 2024 . Figure 1: Mechanisms of drive-induced unwanted state transitions in a transmon. (a) A cartoon showing a transmon in a 3D cavity. The fundamental mode of the cavity plays the role of the readout resonator. Any parametric drive, including the readout pulse is delivered through designated ports coupled to the cavity. The qubit is defined by the two lowest levels of the cosine potential of tranmson. (b) Mechanism A : Resonant exchange of energy between the qubit and a spurious mode e.g. a two-level system (TLS). Under the drive, the transmon experiences ac-Stark shift and the qubit tunes into resonance with one or more TLS near the qubit frequency. Such an exchange depends only on the amount of ac-stark shift experienced by the qubit, and not on any frequency-matching condition involving the drive frequency. (c) Mechanism B : Intrinsic multi-photon excitation of the transmon by absorbing multiple drive photons, due to its nonlinearity. When the energy gap between the initial and a higher excited state matches an integer multiple of the drive frequency (within selection rules), the transmon is excited through this multi-photon process. (d) Mechanism C : Inelastic scattering of the drive off the transmon, causing it to either excite or relax while transferring the excess energy to the environment. (e) The transition rate of mechanism C depends on the real part of the impedance seen by the transmon at the emission frequency Connolly et al. 2025 . In a realistic system, the transmon is coupled to a complex impedance network, Z[\omega] , whose details are often unknown to the experimentalist. The peaks in {\rm{Re}}\penalty\ Z_{\rm{env}} corresponds to additional modes arising from device geometry or material defects, that couple to the transmon. (f) Simulated {\rm{Re}}\penalty\ Z[\omega] of the 3D transmon shown schematically in (a), showing multiple resonances due to spurious electromagnetic modes. Material defects introduce additional modes, not shown here, further crowding the spectrum. One of the limitations for the fidelity of such operations comes from the decoherence of the physical qubit, leading to incoherent errors. The probability of such errors can be reduced by increasing the speed of the operations, achieved by increasing the strength of the microwave drive. However, as the drive strength increases, the system experiences drive-induced unwanted state transitions (DUST). Such deleterious transitions can either happen between the computational states Sivak et al. 2023 ; Thorbeck et al. 2024 ; Bengtsson et al. 2024 or between the computational states and the non-computational ones Sank et al. 2016 ; Khezri et al. 2023 ; Shillito et al. 2022 ; Lu et al. 2023 ; Cohen et al. 2023 ; Dumas et al. 2024 ; Xia et al. 2025 ; Xiao et al. 2023 ; Nesterov and Pechenezhskiy 2024 ; Féchant et al. 2025 ; Singh et al. 2024 ; Bista et al. 2025 . The onset of errors caused by these transitions limits the drive strength the qubit can tolerate, and hence the maximum speed and fidelity one can achieve for quantum operations. DUST has been investigated in different superconducting circuit implementations, such as transmon Sank et al. 2016 ; Khezri et al. 2023 ; Dumas et al. 2024 ; Thorbeck et al. 2024 , fluxonium Bothara et al. 2025 ; Bista et al. 2025 ; Singh et al. 2024 ; Nesterov and Pechenezhskiy 2024 , and driven stabilized cat qubits Grimm et al. 2020 ; Venkatraman et al. 2022 ; Xiao et al. 2023 ; Frattini et al. 2024 ; Hajr et al. 2024 ; Ding et al. 2025 . However, in experiments, the understanding and mitigation of DUST are challenged by the existence of multiple competing mechanisms leading to similar observations. Can we parse the mechanisms of DUST observed in an experimental device and systematically avoid them in the design phase of the circuit? In this work, we answer this question affirmatively by experimentally discriminating three distinct mechanisms responsible for DUST in a fixed-frequency 3D transmon: A. Qubit brought into resonance with a spurious mode by