Examining statistical isotropy of CMB low multipoles from Planck PR4 data

Pavan K. Aluri, Sanjeet Kumar Patel · 2025

Read Examining statistical isotropy of CMB low multipoles from Planck PR4 data by Pavan K. Aluri, Sanjeet Kumar Patel (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-22795.txt.

Introduction

Pavan Aluri and Sanjeet Kumar Patel test if the sky's first glow leans in a dir it should not, in a study from 2025. The glow, the CMB, should look the same in all dirs at wide spans. From the first full maps, wide modes have shown quirks: lean, flatness, and strange kin lines twixt modes.

Fresh Planck PR4 maps met a power-shape tool that reads each mode's spread sans a set frame. Modes two through sixty-one were tried. A fair share proved bent in dir, with a joint chance of three in a thousand. The flat ones sat in that bent set, so flat may be a side mark of lean. The famed two-mode line still stands. Wide sky, they find, is not quite fair.

Catalog record

CREATORPavan K. Aluri, Sanjeet Kumar Patel
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-22795

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Examining statistical isotropy of CMB low multipoles from Planck PR4 data Pavan K. Aluri, Sanjeet Kumar Patel Abstract Low multipoles ( l l ) in cosmic microwave background (CMB) temperature anisotropies have shown some ‘peculiarities’ when examined since the release of the full sky CMB maps, using a variety of tests. In this paper, we concern ourselves with the very first peculiarities seen in CMB data viz., a breakdown of statistical isotropy in the form of axiality and planarity of these low- l l modes, and preferred alignments among them. We scrutinize the latest CMB data from ESA’s Planck mission, PR4, to evaluate the current status of these deviations. We employ the Power tensor method which allows an invariant characterization of the distribution of power in a given multipole, and apply it to probe the first sixty multipoles i.e., l = 2 l=2 to 61. We find that there are significant number of modes that are intrinsically anisotropic with a cumulative probability of 0.3 % 0.3\% . However since the planarity study reveals that those modes that are unusually planar are subset of these anisotropic modes, we conclude that they may not be intrinsically planar. The quadrupole is still well aligned with the octopole. Besides, l = 3 l=3 , higher multipoles aligned with quadrupole are found to be insignificant. Interestingly, the collective alignment axis of the first sixty multipoles is found to be broadly closer to the axis of dipole, quadrupole, octopole and other modes aligned with l = 2 l=2 . Department of Physics, Indian Institute of Technology (BHU), Varanasi - 221005, India Keywords: Cosmology, CMB, temperature anisotropies, statistical isotropy, Planck PR4 1 Introduction Cosmological principle which is the foundation of modern cosmology asserts that the universe is homogeneous and isotropic on very large scales. With the advent of precision cosmology as a result of full sky mapping of cosmic microwave background (CMB) anisotropies, particularly starting from NASA’s Wilkinson Microwave Anisotropy Probe’s (WMAP) first year data release, these implications, specifically the isotropy of CMB, was subjected to a plethora of tests. This exercise by the cosmology community resulted in identifying some peculiarities of CMB low multipoles that have come to be called anomalies (for an overview of these anomalies see, for example, [ 1 , 2 , 3 ] ). These were found to be present in the CMB data from the latest ESA’s Planck full sky mission also, that succeeded the WMAP mission [ 4 , 5 , 6 , 7 , 8 ] . One of the first few anomalies that received significant attention is the existence of preferred alignments among low multipoles [ 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 ] . These large angular scale modes were found to be anomalously aligned or highly planar. In this paper, we assess the status of these alignments using the latest CMB temperature anisotropies map from Planck public release 4 (PR4) obtained using the Commander cleaning procedure [ 18 , 19 ] . Planck PR4 maps were produced using the NPIPE map making pipeline [ 20 ] . Some of the statistical tools to examine such preferred alignments proposed in the literature thus far are, for example, the angular momentum maximization method [ 9 , 17 ] , Maxwell’s multipole vectors [ 10 , 11 ] , and the Power tensor method [ 12 , 21 ] . In this paper, we will be using the Power tensor method. More details on the relationship between our chosen method and the other methods can be found in Ref. [ 12 , 21 ] . Rest of the paper is organized as follows. First, the Power tensor method and associated statistics are briefly reviewed. Then the data and simulations used in the current study to assess the significance of our statistics are described. Thereafter, our results and analysis are presented, followed by discussion and conclusions. 2 Statistics used In this section, we describe the statistics used for the analysis of CMB maps viz., the Power tensor (PT) and the Alignment tensor (AT) developed in Ref. [ 12 , 21 ] . However in what follows we will be presenting their slightly altered definitions as used in Ref. [ 22 ] . This methodology was also applied to E -mode polarization of CMB from Planck 2015 full mission data in Ref. [ 23 ] , however with inconclusive results owing to its low signal to noise ratio and foreground residual biases. 2.1 Power tensor CMB anisotropies are conventionally expanded in terms of spherical harmonics, Y_{lm}(\hat{n}) , as \Delta T(\hat{n})=T(\hat{n})-T_{0}\,=\sum_{l=1}^{\infty}\sum_{m=-l}^{+l}a_{lm}Y_{lm}(\hat{n})\,, (1) where \Delta T(\hat{n}) are the temperature fluctuations, around the mean CMB sky temperature of T_{0}\approx 2.7255 K [ 24 ] , in some direction \hat{n}=(\theta,\phi) on the celestial sphere. The Power tensor is a quadratic estimator in terms of spherical harmonic coefficients, a_{lm} , and is defined as, A_{ij}(l)=\frac{1}{l(l+1)(2l+1)}\sum_{mm^{\prime}m^{\prime\prime}}a_{lm}^{*}J^{i}_{mm^{\prime}}J^{j}_{m^{\prime}m^{\prime\prime}}a_{lm^{\prime\prime}}\,, (2) where J^{i}_{mm^{\prime}} , for i=x,y,z , are the (2l+1)\times(2l+1) angular momentum matrices for a particular ‘ l ’. Thus, the Power tensor is a 3\times 3 matrix, and the prefactor ensures that the ensemble average of the Power tensor \langle A_{ij}\rangle=\delta_{ij}\,C_{l}/3 and it’s trace given by \sum_{i}\langle A_{ii}\rangle=C_{l} . This follows from the fact that the two point angular correlation function of CMB anisotropies is given by \langle a_{lm}a^{*}_{l^{\prime}m^{\prime}}\rangle=C_{l}\delta_{ll^{\prime}}\delta_{mm^{\prime}} , when statistical isotropy holds. The Power tensor essentially maps a multipole onto an ellipsoid, with the three orthogonal axes given by its three eigenvectors defining an invariant frame. It’s three eigenvalues indicate the amount of power directed along each axis. Let \Lambda_{\alpha} , \alpha=1,2,3 be the eigenvalues, and e^{\alpha}_{k} be the corresponding eigenvectors, {\bf e}^{\alpha} , with components indexed by ‘ k ’. Further, let the normalized eigenvalues be denoted by \lambda_{\alpha}=\Lambda_{\alpha}/(\sum_{\beta}\Lambda_{\beta}) . Using these (normalized) eigenvalues, one can define what is called a Power entropy as, S(l)=-\sum_{\alpha=1}^{3}\lambda_{\alpha}\log(\lambda_{\alpha})\,, (3) where ‘ \log ’ in the above equation is the natural logarithm of the normalized eigenvalues. Depending on how much power ( \lambda_{\alpha} ) is distributed along each eigenvector, one can characterize the nature of a multipole. If all the power is contained in one of the eigenvalues of A_{ij} , say \Lambda_{3} , then \lambda_{3}\rightarrow 1 , while \lambda_{1} , \lambda_{2}\rightarrow 0 , and the Power entropy, S\rightarrow 0 . Thus the ellipsoid represented by the Power tensor for a particular multipole is maximally deformed along an axis. In the case of statistical isotropy, the three eigenvalues will be equal i.e., \lambda_{\alpha}=1/3 , for \alpha=1,2,3 , and the Power entropy S=\log(3)\approx 1.0986 represents maximal isotropy of a multipole ‘ l ’. Note that, the eigenvectors of the Power tensor are headless, meaning they only represent axes and not directed vectors. We can now associate a preferred axis with a multipole ‘ l ’, as the one along which more power is directed (i.e., eigenvector corresponding to the largest eigenvalue). We refer to this axis as principal eigenvector (PEV). The eigenvalues and eigenvectors, and thus PEVs, provide independent information about the nature of the multipole. The eigenvalues can be invariantly combined using Power entropy to test the level of isotropy violation in a particular multipole. Independent of the Power entropy, the

Read the complete text