Memory-Type Null Controllability of Heat Equations with Delay Effects

Dev Prakash Jha, Raju K. George · 2025

Read Memory-Type Null Controllability of Heat Equations with Delay Effects by Dev Prakash Jha, Raju K. George (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-22221.txt.

Introduction

Dev Prakash Jha and Raju K. George take up control of heat flow in a 2025 math paper. They study heat rules that carry two snags at once: a delay, where the past state counts late, and memory, where past states keep weight over time.

The team sets a strong goal: at the end time, the state, the delayed part, and a set memory score must all reach zero. They link that goal to a test on a twin system run over a longer span. With a deep bound on how waves spread, they prove the test holds for a heat rule with a short-cut memory form. Computer runs back the proof, and moving control zones cost less than fixed ones in their tests.

Catalog record

CREATORDev Prakash Jha, Raju K. George
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE50 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-22221

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Memory-Type Null Controllability of Heat Equations with Delay Effects Dev Prakash Jha, Raju K. George Abstract This article is devoted to the study of null controllability for evolution equations that incorporate both memory and delay effects. The problem is particularly challenging due to the presence of memory integrals and delayed states, which necessitate strengthening the classical controllability requirement to ensure complete rest at the final time. To address this, we adopt the notion of Delay and memory-type null controllability, which demands the vanishing of the state, the accumulated memory term, and the influence of delay at the terminal time. Utilizing duality arguments, we reduce the controllability analysis to proving suitable observability inequalities for the corresponding adjoint system. We begin with finite-dimensional systems and establish rank-type conditions characterizing controllability. These insights are then extended to parabolic partial differential equations with delay and memory terms. By leveraging Carleman estimates and time-dependent control strategies, we derive sufficient conditions under which controllability can be achieved. Numerical simulations validate the theoretical results and illustrate the critical role of moving control regions in neutralizing the effects of memory and delay. Keywords: Evolution equation with memory, Delay and memory-type null controllability, rank condition, Carleman estimates, observability estimate 1 Introduction The study of controllability in evolution equations has a long-standing history, beginning with finite-dimensional linear systems (see [ 1 ] ). In these systems, controllability is typically characterized using algebraic conditions based on the rank of matrices that define the system dynamics and control mechanisms. Over the years, this theory has been extended to a broader class of systems, including those in infinite-dimensional spaces, as well as to nonlinear and stochastic models (see, e.g., [ 2 , 3 , 4 , 5 , 6 ] , and references therein). Nevertheless, many existing studies address evolution equations that incorporate memory effects, which are often motivated by physical considerations. For instance, in [ 7 ] , a modification of Fourier’s law was introduced to resolve the nonphysical implication of instantaneous heat propagation found in the classical heat equation (cf. [ 8 ] ), resulting in a heat equation with memory effects. \left\{\begin{aligned} y_{t}-\sum_{i,j=1}^{n}\left\{a^{ij}(x)\left[ay_{x_{i}}+\int_{0}^{t}b(t-s,x)y_{x_{i}}(s,x)\,ds\right]\right\}_{x_{j}}=u\chi_{\omega}(x)\quad\text{in }Q,\\ y=0\quad\text{on }\Sigma,\\ y(0)=y_{0}\quad\text{in }\Omega.\end{aligned}\right. (1) In the system above, b(\cdot,\cdot) denotes a smooth memory kernel, and a\in\{0,1\} is a fixed parameter. The domain \Omega\subset\mathbb{R}^{n} , with n\in\mathbb{N} , is a bounded open set with a boundary \partial\Omega that is infinitely differentiable. The spatial variable is denoted by x=(x_{1},\ldots,x_{n}) , and (a^{ij}(x))_{n\times n} is a uniformly positive definite matrix with adequate regularity. The control is localized within a nonempty open subset \omega\subset\Omega . We define Q=(0,T)\times\Omega and \Sigma=(0,T)\times\partial\Omega , where T>0 is a finite time horizon. The symbol \chi_{\omega} stands for the characteristic function of \omega , and \nu=\nu(x) is the outward unit normal vector at x\in\partial\Omega . The existence, uniqueness, and propagation properties of such models have been explored in [ 9 ] . When the memory effect is omitted, i.e., b(\cdot)\equiv 0 , and a=1 , the system simplifies to the standard heat equation: \left\{\begin{aligned} y_{t}-\sum_{i,j=1}^{n}\left[a^{ij}(x)y_{x_{i}}\right]_{x_{j}}&=u\chi_{\omega}(x)\quad\text{in }Q,\\ y&=0\quad\text{on }\Sigma,\\ y(0)&=y_{0}\quad\text{in }\Omega.\end{aligned}\right. (2) The null controllability of this classical formulation has been thoroughly studied. For example, it is established in [ 3 ] that for any T>0 and any nonempty open set \omega\subset\Omega , equation ( 2 ) is null controllable in L^{2}(\Omega) . That is, for any initial state y_{0}\in L^{2}(\Omega) , there exists a control input u\in L^{2}((0,T)\times\omega) such that the corresponding weak solution y(\cdot)\in C([0,T];L^{2}(\Omega))\cap C((0,T];H_{0}^{1}(\Omega)) satisfies y(T)=0. (3) In the context of parabolic equations, it is well-known that due to the infinite speed of propagation, the controllability time T and the control region \omega can be chosen arbitrarily small. However, this favorable null controllability property does not extend straightforwardly to models with memory effects, where the dynamics are more intricate and less understood (see, e.g., [ 10 , 11 ] ). When a=0 , it has been demonstrated under certain conditions in [ 9 ] that system ( 1 ) exhibits finite speed of propagation for finite heat pulses. This behavior aligns more closely with physical heat conduction and has meaningful implications in control theory. Specifically, assuming suitable conditions on the coefficients a^{ij}(\cdot) and on the geometry of the control region \omega , and provided that T>0 is sufficiently large, the system is controllable in the sense that for any initial and target states y_{0},y_{1}\in L^{2}(\Omega) , there exists a control function u\in L^{2}((0,T)\times\omega) such that the corresponding solution y\in C([0,T];L^{2}(\Omega)) satisfies y(T)=y_{1} in \Omega [ 12 ] . Related discussions can be found in [ 13 , 5 , 14 , 15 ] . It is important to note, however, that this type of result does not address the state of the accumulated memory at time t=T . Hence, even if y(T)\equiv 0 , the system cannot be guaranteed to reach full rest unless the memory term also vanishes: \int_{0}^{T}b(T-s,x)y_{x_{i}}(s,x)\,ds\equiv 0. (4) Thus, the controllability described above should be interpreted as partial controllability, since complete control would require steering both the state and the memory term to zero. In the case where a=1 , equation ( 1 ) corresponds to a controlled heat equation with a parabolic memory kernel. Recent studies (see [ 10 , 11 , 16 , 17 ] ) have shown that null controllability may fail when the memory kernel b(\cdot,\cdot) is a nontrivial constant and the control region \omega remains fixed over time. Nonetheless, approximate controllability remains achievable under specific settings (see [ 17 , 18 ] ). The complete characterization of this behavior remains an open question, which this work seeks to address. The main contributions of this paper are twofold: first, to introduce an appropriate definition of controllability for systems involving memory; and second, to demonstrate that, although null controllability may not hold with static control supports, it can be achieved when the support of the control moves in time and eventually covers the entire spatial domain. This approach aligns with the strategy used in [ 19 ] for viscoelastic systems. To explore this connection between viscoelastic models and the memory-dependent systems under consideration, we begin by examining the simplest illustrative case: \left\{\begin{aligned} y_{t}-\Delta y+\int_{0}^{t}y(s)\,ds&=u\chi_{\omega}(x)&&\text{in }Q,\\ y&=0&&\text{on }\Sigma,\\ y(0)&=y_{0}&&\text{in }\Omega.\end{aligned}\right. (5) Introducing the auxiliary variable z(t)=\int_{0}^{t}y(s)\,ds , the system can be reformulated as \left\{\begin{aligned} y_{t}-\Delta y+z&=u\chi_{\omega}(x)&&\text{in }Q,\\ z_{t}&=y&&\text{in }Q,\\ y=z&=0&&\text{on }\Sigma,\\ y(0)=y_{0},\,z(0)&=0&&\text{in }\Omega.\end{aligned}\right. (6) This reformulated system couples a parabolic partial differential equation with an ordinary differential equation, a structure commonly encountered in viscoelastic models (refer to [ 19 ] ). Achieving full null controllability entails steering both the state y and the memory term z=\int_{0}^{t}y(s)\,ds to zero at the final time t=T . However, due to the influence of the ODE component, controllability cannot be achieved if the control is restricted to a fixed subregion \omega of \Omega . Consequently, the control support must traverse the domain throughout the control interval to ensure system controllability. As will be demonstrated, the strategies and analytical methods outlined in [ 19 , 20 ] can be effectively extended to address this modified framework. To formulate our main results, we consider the following abstract framework: \left\{\begin{aligned} y_{t}(t)&=Ay(t)+A_{1}y(t-h)+\int_{0}^{t}M(t-s)y(s)\,ds+B(t)u(t),\quad t\in[0,T],\\ y_{0}(\theta)&=\varphi(\theta),\quad\theta\in[-h,0].\end{aligned}\right. (7) Here, y(\cdot):[-h,\tau]\to Y represents the state variable, and u(\cdot):[0,\tau]\to U denotes the control function, where Y and U

Read the complete text