Electrostatic control of quantum phases in KTaO 3 -based planar constrictions
Jordan T. McCourt, Ethan G. Arnault, Merve Baksi, Divine P. Kumah, Gleb Finkelstein, Samuel J. Poage, Salva Salmani-Rezaie, Kaveh Ahadi · 2025
Read Electrostatic control of quantum phases in KTaO 3 -based planar constrictions by Jordan T. McCourt, Ethan G. Arnault, Merve Baksi, Divine P. Kumah, Gleb Finkelstein, Samuel J. Poage, Salva Salmani-Rezaie, Kaveh Ahadi (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-18894.txt.
Introduction
Jordan McCourt and co-authors report a 2025 method for building tunable quantum devices from a layered oxide material. Thin electron layers at oxide interfaces can carry supercurrents, but making small, separately controlled parts has been hard. The team patterns narrow channels in such a layer.
Side gates made in the same layer tune each channel on its own, helped by the material's very strong response to electric fields. With less than one volt, the gates could shift the critical current and the transition point of the weak link. Further tuning produced a regular pattern linked to single charge flow. The authors say the process scales and could serve both devices and basic studies.
Catalog record
| CREATOR | Jordan T. McCourt, Ethan G. Arnault, Merve Baksi, Divine P. Kumah, Gleb Finkelstein, Samuel J. Poage, Salva Salmani-Rezaie, Kaveh Ahadi |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 21 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-18894
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Electrostatic control of quantum phases in KTaO 3 -based planar constrictions Preprint: APS/123-QED Jordan T. McCourt, Ethan G. Arnault, Merve Baksi, Divine P. Kumah, Gleb Finkelstein, Samuel J. Poage, Salva Salmani-Rezaie, Kaveh Ahadi Abstract Two-dimensional electron gases (2DEGs) formed at complex oxide interfaces offer a unique platform to engineer quantum nanostructures. However, scalable fabrication of locally addressable devices in these materials remains challenging. Here, we demonstrate an efficient fabrication approach by patterning narrow constrictions in a superconducting KTaO 3 -based heterostructure. The constrictions are individually tunable via the coplanar side gates formed within the same 2DEG plane. Our technique leverages the high dielectric permittivity of KTaO 3 ( ϵ r ∼ 5000 \epsilon_{r}\sim 5000 ) to achieve strong electrostatic modulation of the superconducting 2DEG. Transport measurements through the constriction reveal a range of transport regimes: Within the superconducting state, we demonstrate efficient modulation of the critical current and Berezinskii–Kosterlitz–Thouless (BKT) transition temperature at the weak link. Further tuning of the gate voltage reveals an unexpectedly regular Coulomb blockade pattern. All of these states are achievable with a side gate voltage | V SG | ≲ 1 |V_{\mathrm{SG}}|\lesssim 1 V. The fabrication process is scalable and versatile, enabling a platform both to make superconducting field-effect transistors and to study a wide array of physical phenomena present at complex oxide interfaces. I Introduction Figure 1: (a) Lattice structure of the cubic perovskite KTaO 3 . (b) A HAADF-STEM image of the sample with LaMnO 3 grown on a KTaO 3 (111) substrate and capped with TiO x . The highly crystalline structure of the KTaO 3 and LaMnO 3 can be clearly seen. (c) Optical image of a KTaO 3 heterostructure with the developed lithographic mask, prior to etching the device. (d) An AFM image of the weak link measured in Figures 1 e, 2 and 3 . The constriction is formed by two insulating trenches (dark regions in the image) which separate it from the coplanar side gates formed in the remainder of the film. Scale bar is 1 \mu m. (e) Map of the differential resistance measured across the constriction as a function of I and V_{\mathrm{SG}} in the n\approx 5.7\times 10^{13} cm -2 device at 120 mK. Two-dimensional electron gases (2DEGs) formed at the interfaces of complex oxides have emerged as a promising platform to explore the interplay of superconductivity, spin-orbit coupling, nematicity and ferromagnetism hwang_emergent_2012 . The recent discovery of superconductivity at the (111) interfaces of KTaO 3 is particularly interesting due to its relatively high critical temperature liu_two-dimensional_2021 ; chen_electric_2021 ; qiao_gate_2021 , anisotropic in-plane superconductivity liu_two-dimensional_2021 ; arnault_anisotropic_2023 ; zhang_spontaneous_2023 , giant critical magnetic fields al-tawhid_enhanced_2023 ; filippozzi_high-field_2024 , low superfluid stiffness mallik_superfluid_2022 ; yang_tuning_2025 ; yu_sketched_2025 and ferromagnetic order krantz_intrinsic_2024 ; hua_superconducting_2024 ; ning_coexistence_2024 . Critically, these phenomena display a strong dependence on the carrier density. Fortunately, the KTaO 3 2DEGs are highly tunable because of their relatively low carrier density (several times 10^{13} cm -2 ), and the high dielectric permittivity of the substrate \sim 5000 ) geyer_microwave_2005 . This combination of properties allows one to tune the electron density over a wide range between the superconducting and insulating states chen_electric_2021 . Similar tunability is also present in 2D van der Waals crystals and Moiré superlattices, however such structures require complex fabrication techniques that are hard to control, and often result in significant device-to-device variations lau_reproducibility_2022 . Overall, the combination of electrostatic field control and scalable growth make KTaO 3 a highly promising platform for achieving fully integrated superconducting electronics mannhart_oxide_2010 ; schlom_perspective_2015 ; coll_towards_2019 ; kim_electronic-grade_2024 . Despite this promise, so far the electrostatic modulation of the superconducting state in KTaO 3 has only been achieved by applying back gate voltage of up to 200 V to ‘switch off’ superconductivity chen_electric_2021 . The high voltage requirement greatly limits the practical application of this promising material. Here, we overcome the limitation by presenting a novel fabrication route for making KTaO 3 devices, which display a wide range of transport properties with a gate voltage less than 1 V in magnitude. Specifically, we etch narrow constrictions in the plane of the structure, which serve as superconducting weak links. We follow the classical Dayem bridge design of Ref. anderson_radio-frequency_1964 with a notable modification: the constrictions are defined by narrow trenches, and the disconnected regions of the film serve as self-aligned side gates. The gates are highly efficient in tuning the junctions, allowing us to explore several transport regimes within one structure. We present transport measurements which demonstrate the electrostatic tuning of the superconducting state within the constriction via large modulation of the critical current. Furthermore, the constrictions demonstrate the Berezinskii–Kosterlitz–Thouless transition with gate-tunable critical temperature. Further depletion of the constrictions results in a dissipative regime in which the resistance can be varied by 4 orders of magnitude. There, we can resolve a regular pattern of conductance peaks corresponding to the Coulomb blockade of Cooper pairs. This evolution establishes KTaO 3 as a platform for studying the interplay of multiple quantum phenomena, all in a single device. The results presented here could also be relevant to the field of quantum devices, as we present a simple, scalable method to fabricate all-superconducting field effect transistors. II Results The heterostructures are grown via the oxide molecular beam epitaxy, starting with a KTaO 3 (111) substrate, followed by a layer of LaMnO 3 , and capped by TiO x al-tawhid_enhanced_2023 . A 2-dimensional electron gas (2DEG) is formed at the interface of LaMnO 3 and KTaO 3 (Figure 1 c). The capping layer of TiO x serves to modify the initial carrier density via oxygen depletion. The resulting carrier density, n , is in the mid- 10^{13} cm -2 range, which is high compared to the typical 2DEGs in semiconducting heterostructures but very low compared to metal films. Our devices are defined by a single round of electron-beam lithography and wet etching. After the development of the e-beam resist (PMMA), we perform a selective wet etch with a KI/HCl mixture to remove the exposed layers grown on top of the KTaO 3 substrate bridoux_alternative_2012 . Simultaneously, the etch oxidizes the underlying surface, leaving it insulating, while the regions protected by the e-beam resist remain conductive. With this technique, we pattern narrow ( \sim 1 \mu m wide) constrictions separated from the rest of the electron gas by insulating trenches (also \sim 1 \mu m wide). The conductive regions flanking the constrictions are used as the side gates (Figure 1 d). A very similar design has been pioneered in a LaAlO 3 /SrTiO 3 heterostructure monteiro_side_2017 . Unfortunately, the tunability of those constriction was limited, whilst more tunable devices in that material system required complex fabrication techniques, e.g. thierschmann_transport_2018 . In our case, strong modulation is achieved by side gate voltages |V_{\mathrm{SG}}|\lesssim 1 V. Assuming an approximate field-induced density variation of \delta n\sim\frac{\epsilon_{r}\epsilon_{0}}{ed}V_{\mathrm{SG}} (where e is the electron charge and d is the distance between the gate and the channel), we estimate a tunability of a few \times 10^{13} cm -2 V -1 in our devices. Note that these large variations of density are enabled by the very high dielectric constant of KTaO 3 , which approaches 5000 geyer_microwave_2005 . The