Opportunities for real-time process control of electrode properties in lithium-ion battery manufacturing

Noël Hallemans, Philipp Dechent, David Howey, Simon Clark, Mona Faraji Niri, James Marco, Patrick S. Grant, Stephen R. Duncan · 2025

Read Opportunities for real-time process control of electrode properties in lithium-ion battery manufacturing by Noël Hallemans, Philipp Dechent, David Howey, Simon Clark, Mona Faraji Niri, James Marco, Patrick S. Grant, Stephen R. Duncan (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-17048.txt.

Introduction

Noël Hallemans and co-authors review how battery factories could control electrode making in real time, in a 2025 paper. Electrodes are among the costliest parts of a lithium-ion battery, yet plants still set conditions mostly by trial and error. Once a recipe is fixed, the line is rarely steered as a whole to hold it.

Drawing on methods used in other film and sheet industries, the authors map where sensors and feedback loops could help. Live control could cut cost, waste, and carbon output while raising yield and speed. They also lay out the hard parts, such as measuring wet coatings fast enough to act. The paper serves as a guide for makers who want smarter, steadier production lines.

Catalog record

CREATORNoël Hallemans, Philipp Dechent, David Howey, Simon Clark, Mona Faraji Niri, James Marco, Patrick S. Grant, Stephen R. Duncan
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE48 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-17048

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Opportunities for real-time process control of electrode properties in lithium-ion battery manufacturing Noël Hallemans, Philipp Dechent, David Howey, Simon Clark, Mona Faraji Niri, James Marco, Patrick S. Grant, Stephen R. Duncan Abstract Lithium-ion batteries (LIBs) have an important role in the shift required to achieve a global net-zero carbon target of 2050. Electrode manufacture is amongst the most expensive steps of the LIB manufacturing process and, despite its apparent maturity, optimised manufacturing conditions are arrived at by largely trial and error. Currently, LIB manufacturing plants are controlled to follow the fixed “recipe” obtained by trial and error, which may nonetheless be suboptimal. Moreover, regulating the process as a whole to conform to the set conditions is not widespread. Inspired by control approaches used in other film and sheet processes, we discuss opportunities for implementing real-time process control of electrode-related products, which has the potential to reduce the electrode manufacturing cost, CO2 emissions, usage of resources by increases in process yield, and throughput. We highlight the challenges and significant opportunities of implementing real-time process control in LIB electrode production lines. 1 Introduction Global demand for batteries is expected to increase dramatically over the next decade [ 1 , 2 , 3 ] (see Fig. 1 (a) for the UK [ 4 ] ). Primarily, this is driven by the need for energy storage in electric vehicles (EVs), which are strongly promoted by governments many of whom have set a net-zero carbon emissions target for 2050, together with the increasing need for flexible grid storage. Several authorities have set out their vision to achieve globally competitive domestic battery supply chains by 2030 [ 5 , 6 , 7 ] . Figure 1: (a) Potential demand for UK-produced batteries [ 4 ] . Around 200 GWh (equivalent to 20 gigafactories each of 10 GWh) of supply will be required by 2040 in the UK to satisfy the need for batteries for electric vehicles and grid storage. (b) Volume-weighted average lithium-ion battery cell and pack price [ 8 ] . The survey includes 303 data points from commercial vehicles, passenger cars, buses, and stationary storage. Note that the rate of decrease in price has slowed, showing that batteries are becoming commodity products, i.e. price is increasingly related primarily to the volume produced. (c) Distribution of approximate battery pack cost [ 9 ] . Electrode manufacturing is the second most significant cost after cell materials. Lithium-ion batteries (LIBs) are attractive due to their high energy density and long cycle life, and despite challenges related to the supply of critical materials [ 10 ] , the majority of battery production for EVs is still expected to be based on this technology in the critical time-frame to 2035. Although the cost of LIB-based cells has decreased significantly in recent years [ 8 ] (see Fig. 1 (b)), there is pressure to reduce costs further—for instance the UK “Faraday Battery Challenge” [ 11 ] aims to further reduce battery pack cost by 2035. Given that in the short to medium term, the majority of battery production will be based on LIBs, to achieve this target it will be necessary to improve the throughput and yield of LIB electrode fabrication lines [ 12 ] , which are the second most expensive part of battery pack production [ 9 , 13 ] (see Fig. 1 (c)). This can be achieved by limiting the amount of material that has to be scrapped because it does not satisfy the required quality specifications. Over the same time period, there is an aim to introduce a closed-loop recycling system so that 95% of the material in a pack is recycled from end-of-life batteries [ 11 , 14 , 15 , 16 ] , which will increase the variability of the feedstock re-entering electrode manufacturing lines. Significant amounts of energy are used in battery manufacturing, particularly on electrode lines, and there is a need to reduce the carbon footprint from the current level of up to the order of 100 kg CO 2 -eq generated for each kWh of battery storage produced [ 17 , 18 ] . Real-time process control of electrode properties has the potential to address these issues. Although battery manufacturers are already making extensive use of feedback control on electrode lines, for example with speed control on drives and temperature control in ovens, they are currently applying closed-loop control to the process , rather than to the product (i.e., the electrodes themselves). This means that manufacturers are using open-loop control of the product by making electrodes to a standard “recipe”. If suppliers of the raw materials can minimise variations in the feedstock, then—provided that the manufacturing process is tightly regulated—the required quality specifications can be achieved at acceptable yields by applying open-loop control. However, quality assessment of the product is typically carried out offline at the end of the process, so there is a delay before out-of-specification products are detected. Given that most manufacturing lines are over 100\text{\,}\mathrm{m} long and line speeds exceed 1\text{\,}\mathrm{m}\mathrm{/}\mathrm{s} , this can result in large amounts of scrapped material. To reduce the risk of producing too much scrap, processes tend to be operated conservatively, so line speeds are lower than necessary and excess drying is applied to ensure that the coating emerging from the ovens is dry, which wastes energy. There is a clear benefit in being able to measure product properties in real-time and use these measurements as part of feedback loops to make changes to the process in real time. The current status of battery manufacturing is similar to the paper industry in the 1960’s, where the cost of paper was relatively high and manufacturers could sell all of the product that they could make. It was only in the 1980’s, when competition forced manufacturers to protect their margins by improving productivity, that feedback control started to be routinely applied in the industry [ 19 , 20 , 21 , 22 ] . There is currently insufficient battery manufacturing capacity with desired quality (compared with demand), so although there is pressure to improve the productivity of the process, it has not reached levels experienced by other commodity sectors. However, the driver for feedback control will come once batteries similarly become a “commodity product”, where profit margins are reduced as the price of batteries decreases [ 23 ] , while the costs of production, particularly energy, increase and the financial impact of scrapped material becomes significant. Apart from paper making, feedback control has also been successfully implemented in other sheet and film industries, including plastic film manufacturing [ 24 ] , steel and aluminium sheet production [ 25 , 26 ] , coating [ 27 ] , and printing [ 28 , 29 ] . All of these industries use advanced machinery to manufacture commodity products with relatively small profit margins, and introducing feedback control has been necessary to maintain profitability by increasing production rates and reducing cost and start-up times while ensuring product quality [ 30 ] . Electrode manufacturing shows strong similarities to these film and sheet processes, however, closed-loop control of the product has not yet been extensively implemented in the production of LIBs, because it is likely to be more challenging

Read the complete text