AC magnetic measurements with a self-oscillating LC circuit and its application to university education

Harshit Agarwal, Oleksandra Uralska, Jasmin Billingsley, Maxim Yamilov, Hyunsoo Kim · 2025

Read AC magnetic measurements with a self-oscillating LC circuit and its application to university education by Harshit Agarwal, Oleksandra Uralska, Jasmin Billingsley, Maxim Yamilov, Hyunsoo Kim (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-16709.txt.

Introduction

Harshit Agarwal and four co-authors turn a self-oscillating circuit into a magnetism lab cheap enough for undergraduates, in this 2025 paper. Magnetic measurement is central to materials physics, yet teaching labs rarely own a suitable magnetometer, so students meet magnetism mostly as theory.

Their device is a Colpitts oscillator, a classic self-sustaining circuit, whose coil doubles as the probe: a sample's magnetism nudges the oscillation frequency. The circuit proved exceptionally stable from about ten kilohertz to ten megahertz. It cleanly detected the diamagnetic signal of a superconductor chilled to cryogenic temperatures, a dramatic classroom moment. Students can thus learn real measurement principles and the basics of diamagnetism hands on. The authors present the design, aimed at typical university laboratories, as a way to close the gap between lecture magnetism and lived experiment.

Catalog record

CREATORHarshit Agarwal, Oleksandra Uralska, Jasmin Billingsley, Maxim Yamilov, Hyunsoo Kim
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE30 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-16709

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

AC magnetic measurements with a self-oscillating LC circuit and its application to university education Harshit Agarwal, Oleksandra Uralska, Jasmin Billingsley, Maxim Yamilov, Hyunsoo Kim Abstract Understanding the magnetic properties of matter plays a key role in materials physics. However, university education on fundamental magnetism is limited to a theoretical survey because of the lack of appropriate apparatus that can be applied for laboratory courses at the undergraduate level. In this work, we introduce an AC magnetometer based on the Colpitts self-oscillator with an inductor coil as a probe. We show that this type of self-oscillator can be adopted in a typical university laboratory course to learn the principles of magnetic measurement and to understand the fundamental magnetism of matter. We demonstrate the exceptional stability of the circuit with a working frequency range of 10 kHz to 10 MHz and excellent performance to detect a diamagnetic signal from a superconductor at cryogenic temperature. I Introduction Magnetism is a principal property of matter and is frequently investigated for materials characterization, which has become common practice in research and academic institutions as well as in various industry sectors. However, the magnetism of matter has not been sufficiently emphasized in university education and remains largely theoretical. Furthermore, experimental methods in magnetism are limited in university laboratory courses, resulting in an insufficient understanding of magnetism for undergraduate students. Here, we offer a simple implementation of a magnetic measurement apparatus in an undergraduate laboratory, which would help students understand basic concepts of material magnetism and the principles of magnetic measurements. The most fundamental magnetism includes paramagnetism and diamagnetism Blundell 2001 , typically expected in a metal and an insulator, respectively. While the orbital motion of core electrons contributes to diamagnetism, the paramagnetism arises mainly from electrons’ intrinsic spin magnetic moments, resulting in the Pauli paramagnetism from the itinerant electron or Curie-Weiss paramagnetism from the localized magnetic moment Anderson 1961 ; Anderson 1978 . Magnetic moments in a paramagnetic material can spontaneously order below a critical temperature, becoming a ferromagnet with finite net magnetization M or an antiferromagnet where M=0 . The central quantity of research on materials magnetism is magnetic susceptibility \chi=dM/dH , typically obtained from the measured M in a finite magnetic field H . Its sign, magnitude, and dependence on temperature and field provide comprehensive information about the magnetic state of a solid. The principle of basic magnetic measurement is the linear response of the induced magnetization due to an applied magnetic field, M=\chi H , at a given time and position, and the observation of M allows the determination of \chi for a given H . Magnetic measurement techniques detect magnetization in various ways Mugiraneza and Hallas 2022 . The superconducting quantum interference device (SQUID) has become a standard method to measure DC magnetization Fagaly 2006 . In this technique, a magnetized sample passes through an inductor where the magnetic flux change induces a subtle electric current, which is measured by using a Josephson junction device. Although this technique is one of the most precise methods, it is expensive for an average educational institution. Furthermore, the dynamic nature of magnetism in the sample cannot be studied because the measurement typically takes a few seconds. On the other hand, AC magnetic susceptibility with varying frequencies enables the investigation of the dynamic nature of magnetism and also allows studies of complex magnetic susceptibility that depends on the frequency of measurement Nikolo 1995 ; Topping and Blundell 2018 . A conventional AC magnetic susceptibility technique requires two concentric coils. The primary outer (or driving) coil is used to generate an AC magnetic field and therefore induces M in the sample inside the secondary (or pick-up) coil, which detects the oscillating M . The amplitude and phase of the induced current in the secondary coil are converted to AC magnetic susceptibility Gömöry 1997 . In cryogenic applications, the sample and both coils are located inside a research refrigeration system, and long electrical leads such as twisted pairs and coaxial cables are introduced between the coils and a measurement device, typically a lock-in amplifier. The type of long leads fundamentally limits the maximum frequency and precision because of a sizable background inductance Clover and Wolf 1970 . When exceptional precision is required in an AC magnetic measurement, the inductor-capacitor ( LC ) self-oscillator can be employed by using an inductor coil as a magnetic probe. The technique utilizing the LC self-oscillator is a versatile experimental tool for the investigation of magnetic properties, and they have been employed for various scientific measurements. A cryogenic application of the LC self-oscillator offers high sensitivity because it intrinsically eliminates the large background signal from long coaxial cables Clover and Wolf 1970 . Among such techniques, the tunnel diode-based LC self-oscillator (TDO) has been successful in frequency ranges of \sim 10 - 100 MHz Clover and Wolf 1970 ; Degrift 1975 ; Vannette et al. 2008 ; Kim et al. 2018a for magnetism Vannette et al. 2008 and superconductivity Carrington et al. 1999 ; Kim et al. 2018a . Measurements with an LC self-oscillator are typically performed in the frequency domain, and the accurate determination of the frequency shift is crucial, which is directly related to the magnetic susceptibility of a specimen, and 0.001 ppm precision can be readily achieved Degrift 1975 ; Kim et al. 2018a . Although a cryogenic TDO technique has been successful, the TDO signal is generally unstable at room temperature. It also has a narrow working voltage range of, for example, about 150 mV Kim et al. 2018a . Furthermore, the tunnel diode is a delicate component with a narrow p - n junction width Esaki 1958 and is prone to electrostatic shock that is often unpredictable. Therefore, it is not suitable for school education in typical laboratory courses. We found the transistor-powered Colpitts self-oscillator Col ; Rohde and Apte 2016 can be adopted for university magnetism education by integrating it into a lab course or an independent study. In this work, we report details of the development of the Colpitts self-oscillator as a magnetic probe and its potential application to magnetism and circuit education at the university level. II Experimental methods For electrical circuits, we used commercial passive components and various bipolar junction transistors. We tested the circuit with components from various sources and found little or no difference in performance. Low-power tunnel diodes are not widely available and relatively expensive, and we tested the tunnel diode oscillator (TDO) with an inexpensive tunnel diode with the peak current greater than 1 mA, which can be easily obtained from online retail stores. TDO was built on a prototyping, printable circuit board (PCB). For the Colpitts oscillator, we used both a plugable circuit board (breadboard) and various PCBs. A common benchtop power supply, oscilloscope, waveform generator, and frequency counter were used for measurement and data acquisition. III Tunnel diode based LC self-oscillator The tunnel diode was discovered by Leo Esaki in 1958 Esaki 1958 . It is a p - n junction diode comprised of heavily doped semiconductors, which results in substantial overlap of the valence and conduction bands of the p and n types, respectively Streetman 1990 . Such overlap of the bands with a narrow junction width

Read the complete text