Nano-silica based Aqueous Colloidal Gels as Eco-friendly Thixotropic Lubricant

Arun Kumar, a† Vivek Kumar, b† Yogesh M. Joshi, b∗ Manjesh Kumar Singh a · 2025

Read Nano-silica based Aqueous Colloidal Gels as Eco-friendly Thixotropic Lubricant by Arun Kumar, a† Vivek Kumar, b† Yogesh M. Joshi, b∗ Manjesh Kumar Singh a (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-16249.txt.

Introduction

Arun Kumar and three co-authors turn a silica gel into a water-based lubricant in a 2025 paper. Oil and grease pollute; a gel of silica nanoparticles in salted water might replace them. The team measured the gel's flow behavior and tested it on steel sliding against steel, against dry and plain-water comparisons.

Tuning the gel's thickness optimized performance. At best, the friction coefficient fell by about 97 percent against both dry sliding and water, reaching 0.016, while wear dropped by up to 99.6 percent. The authors credit a self-repairing gel that forms a renewing film, with the particles acting as nano-bearings. The gel rebuilds itself at rest and slips into the contact zone under motion, they report.

Catalog record

CREATORArun Kumar, a† Vivek Kumar, b† Yogesh M. Joshi, b∗ Manjesh Kumar Singh a
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE61 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-16249

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Nano-silica based Aqueous Colloidal Gels as Eco-friendly Thixotropic Lubricant Arun Kumar, a† Vivek Kumar, b† Yogesh M. Joshi, b∗ Manjesh Kumar Singh a Abstract The environmental risks posed by traditional oil- and grease-based lubricants can be significantly mitigated by adopting water-based alternatives engineered with superior rheological performance. In this work, we present a fundamentally new and environmentally sustainable aqueous thixotropic colloidal gel of silica nanoparticles formed in the presence of NaCl. We conducted a systematic and detailed investigation of their rheological and tribological characteristics. The tribological performance was evaluated against dry and water-lubricated conditions for steel–steel interface. Our experiments demonstrate that the tribological performance of the formulated nanoparticle gel can be optimized by tuning its rheological properties. A combination of super-low friction and negligible wear was observed. The friction coefficient reduced by up to 97.46% (from 0.63 to 0.016) compared to dry sliding, and by 97.04% (from 0.541 to 0.016) compared to water lubrication. Similarly, the specific wear rate decreased by up to 99.62% and 96.10% under under dry conditions and water lubrication respectively. This performance is attributed to a thixotropic, chemically robust gel formed via van der Waals interactions between silica flocs, enabling self-repairing properties, continuous tribo-film formation, and a nano-bearing effect from silica nanoparticles. These attributes enable the gel to maintain and regain its structure during periods of non-shear while also forming a thin film with sufficiently low viscosity to slip into the interfacial contact zone and continuously replenish it with lubricant. I Introduction Conventional oil and grease lubricants pose environmental and human health risks attributed to their toxic additives Boyde 2002 ; Singh 2022 ; Madanhire and Mbohwa 2016 . Consequently, there has been a transition towards water-based lubricants that prioritize environmental and economic considerations Li et al. 2021a ; Adibnia et al. 2021 ; Rosenhek-Goldian et al. 2018 ; Singh et al. 2015 ; Singh 2020 ; Singh et al. 2018 ; Nalam et al. 2013 . However, water’s inherent properties limit its practical use as an effective lubricant. Water’s low viscosity typically yields lubrication film thicknesses approximately two to three orders of magnitude smaller than conventional oils under hydrodynamic lubrication conditions Kim and Kim 2015 ; Wang et al. 2012 . Moreover, under high contact pressure, water gets squeezed out of the interface owing to its low pressure-viscosity coefficient, resulting in direct surface-to-surface contact. Simply augmenting viscosity does not ensure effective lubrication. Therefore, there is a necessity to utilize non-Newtonian lubricants Veltkamp et al. 2023 ; Ortigosa-Moya et al. 2019 ; Fernandez et al. 2013 ; Yang et al. 2016 ; Hsu et al. 2021 , capable of dynamically adjusting viscosity to accommodate fluctuating operating conditions, thus enhancing overall performance. Issues of shear jamming in shear thickening fluids at a critical shear Fernandez et al. 2013 ; Hsu et al. 2021 directs us to consider thixotropic lubricants that change their rheological properties according to the applied deformation field (shear flow). These lubricants should be capable to form a thin film of sufficiently low viscosity to reduce friction and wear of surfaces in motion. Under the influence of a deformation field, the microstructure of an existing colloidal gel gradually breaks, leading to a decrease in viscosity. Upon cessation of the flow, the microstructure gradually builds-up over time, resulting in an increase in viscosity Bhattacharyya et al. 2023 . In a recent investigation, we demonstrated the effectiveness of thixotropic colloidal gel, of 2D Laponite clay nanoparticles having anisotropic charge distribution on edges and faces, as a lubricant Kumar et al. 2024 . We observed a reduction in the coefficient of friction (CoF) to a certain degree. However, the instability of the CoF curve under fully submerged lubrication constrains its practical application. Additionally, achieving exceptionally low friction under high contact pressure and low speeds is still a challenge. In recent years, additives Chen et al. 2022 ; Li et al. 2021b ; Radice and Mischler 2006 ; Ding et al. 2018 ; Huang et al. 2019 ; Cui et al. 2020 ; Zhang et al. 2014 ; Zhang et al. 2012 ; Wang et al. 2016 have been used to develop water lubrication systems for numerous industries including manufacturing, automotive, ship building, food and biomedical Kim and Kim 2015 . With their nanoscale dimensions and surface effects, nanoparticles serve as promising lubricant additives Soltannia et al. 2023 ; Saidi et al. 2020 ; Erdemir et al. 2016 ; Chen et al. 2020 ; Xie et al. 2016 ; Jiao et al. 2011 ; Li et al. 2006 ; Salinas Ruiz et al. 2021 . Their multifaceted mechanisms of action include hydration film formation, the ball-bearing effect, mending of surface cavities, and the development of protective films through either physical adsorption or through complex tribochemical reactions at the sliding interface Mou et al. 2022 ; Yang et al. 2023 ; Xie et al. 2023 ; Liu et al. 2023 ; Adibnia et al. 2021 ; Wang et al. 2024a . Such mechanisms impart both anti-friction and anti-wear properties. Silica (SiO 2 ) nanoparticles owing to their cost-effective and environment-friendly nature, garner significant attention among other nanoparticles Li et al. 2021b ; Ding et al. 2018 ; Lin et al. 2019 . SiO 2 , often utilized in pair with other nanoparticles as a modifier, help in enhancing the tribological properties of the tribo-system Wang et al. 2020 ; Zhang et al. 2012 ; Liu et al. 2020 . For instance, in one such study carbon nanotube (CNT) and spherical SiO 2 nanoparticles as lubricant additives in deionized water demonstrate reduction of both the friction coefficient and wear volume. This is credited to the sliding-induced tribofilm of CNTs and the potential ball-bearing effect of nano-SiO 2 Xie et al. 2021 . Combined effect of SiO 2 and 2D material such as graphene oxide (GO) was studied by Guo et al. Guo et al. 2018 , where it was observed that the combination of the mechanical properties of GO nanosheets and the microscopic ball-bearing effect of silica nanoparticles contributes to the lubricating and anti-wear properties of aminated silica-modified GO in water. Experimental studies and simulations demonstrate that SiO 2 nanoparticles have promising lubrication capabilities for ceramics also Wen et al. 2016 ; Li et al. 2021b ; Lin et al. 2019 ; Ding et al. 2018 . Colloidal silica, suspensions comprising fine, amorphous, nonporous, and typically spherical silica particles in a liquid phase, are utilized in the production of nanotextured surfaces for micro/nano electromechanical systems via spin-coating. Surfaces generated through this method have demonstrated favorable tribological properties concerning adhesion and friction Zou et al. 2006a ; Zou et al. 2006b . When exposed to accelerators such as NaCl, KCl, CaCl 2 , colloidal silica can undergo gel formation, with the process and rate of gelation being controllable Sögaard et al. 2018 . The literature highlights the tribological potential of SiO 2 nanoparticles. In an area dominated by non-biodegradable synthetic oil-based gels Wang et al. 2024a ; Wang et al. 2024b , aqueous nanofluids and multi-nanoparticle blends, this work introduces a simple, scalable, and eco-conscious lubrication strategy based solely on colloidal nano-silica. Addressing the limitations of a general class of water-based lubricants between metallic contacts particularly under high load conditions Jia et

Read the complete text