SOT Enabled 3D Magnetic Field Sensor with Low Offset and High Sensitivity

Sebastian Zeilinger, Johannes Güttinger, Klemens Prügl, Michael Kirsch, Joshua M. Salazar-Mejía, Sabri Koraltan, Philip Heinrich, Sophie Zeilinger, Bernd Aichner, Florian Bruckner, Hubert Brückl, Armin Satz, Dieter Suess · 2025

Read SOT Enabled 3D Magnetic Field Sensor with Low Offset and High Sensitivity by Sebastian Zeilinger, Johannes Güttinger, Klemens Prügl, Michael Kirsch, Joshua M. Salazar-Mejía, Sabri Koraltan, Philip Heinrich, Sophie Zeilinger, Bernd Aichner, Florian Bruckner, Hubert Brückl, Armin Satz, Dieter Suess (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-15320.txt.

Introduction

Sebastian Zeilinger and eleven co-authors demonstrate a three-axis magnetic field sensor, in this 2025 paper. The device uses spin-orbit torque, where a current through a layered stack twists magnetization, in a tantalum, cobalt-iron-boron, and magnesium oxide sandwich. Good sensors must be sensitive and must cancel their own offset drift in every direction.

Measurements showed small residual offsets in all three axes, around 36 to 50 microtesla. Sensitivity was high and similar across axes. The team also showed the sensor holds up under bias fields, and they used single-spin simulations to sweep cross-axis effects up to one millitesla. By fitting those simulations to data they extracted the two torque parameters that describe the physics. The authors present the design for uses needing compact, precise field sensing.

Catalog record

CREATORSebastian Zeilinger, Johannes Güttinger, Klemens Prügl, Michael Kirsch, Joshua M. Salazar-Mejía, Sabri Koraltan, Philip Heinrich, Sophie Zeilinger, Bernd Aichner, Florian Bruckner, Hubert Brückl, Armin Satz, Dieter Suess
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE47 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-15320

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

SOT Enabled 3D Magnetic Field Sensor with Low Offset and High Sensitivity Sebastian Zeilinger, Johannes Güttinger, Klemens Prügl, Michael Kirsch, Joshua M. Salazar-Mejía, Sabri Koraltan, Philip Heinrich, Sophie Zeilinger, Bernd Aichner, Florian Bruckner, Hubert Brückl, Armin Satz, Dieter Suess Abstract In this work we demonstrate a spin orbit torque (SOT) magnetic field sensor, designed as a Ta/CoFeB/MgO structure, with high sensitivity and capable of active offset compensation in all 3 spatial directions. This is described and verified in experiment and simulation. The measurements of magnetic fields showed an offset of 36, 50 and 37 ​ μ ​ T 37\,\mathrm{\mu T} for x, y and z-fields. Furthermore the sensitivities of these measurements had values of 590, 580 and 490 ​ VA − 1 ​ T − 1 490\,\mathrm{VA^{-1}T^{-1}} in x, y and z-direction. In addition the robustness to bias fields is demonstrated via experiments and single spin simulations by applying bias fields in y-direction. Cross sensitivities were further analyzed via single spin simulations performing a parameter sweep of different bias fields in y- and z-direction up to ± 1 ​ mT \pm 1\,\mathrm{mT} . Last but not least the extraction of the SOT parameters η D ​ L \eta_{DL} and η F ​ L \eta_{FL} is shown via an optimization of a single spin curve to the experimental measurements. I Introduction Magnetic field sensors are a fundamental part in our modern-day society. They are used in various systems including but not limited to cars, mobile phones and robotics. In multiple applications such as electric current sensors via magnetic fields, it is required to measure the absolute value of the magnetic field with highest accuracy. Here, the zero-field offset is the main limiting factor in state-of-the-art sensors. On the one hand, a big part of today’s magnetic field sensors are Hall based devices that use the spinning current technique to achieve active offset compensation in the micro-Tesla range Chen et al. 2015 ; Motz et al. 2012 . On the other hand, there are also tunneling magnetoresistance (TMR)-based devices with very high signal-to-noise ratios but lacking offset compensation Parkin et al. 2005 ; Yuasa et al. 2005 . In this work we utilize a modulation principle of the magnetization to reduce the offset. This is realized by spin orbit torque (SOT) that is highly energy efficient and allows for integration into standard CMOS techniques. The SOT effect is in the focus of current research Mishra and Yang 2021 ; Ryu et al. 2020 ; Shao et al. 2021 . Recently effort is performed to utilize the current induced SOT effect for magnetic field sensing devices Koraltan et al. 2023 ; Luo et al. 2018 ; Li et al. 2021 . We present a sensor based on this effect, designed with active offset compensation. In contrast to Refs. Li et al. 2021 and Chen et al. 2022 our sensor is also able to measure z-fields offset free, which enables a true 3D sensor using only one sensitive element. Offset compensation in the z-direction is achieved through the spinning current technique, commonly used in conventional Hall devices Suess et al. 2025 ; Munter 1990 . II Theory Figure 1: a The analyzed structure is designed as a cross like structure, with a ferromagnetic layer on top of a heavy metal layer. b Spin separation via the Spin Hall effect (SHE). Spin polarized current acts like a torque, through the components \bm{m}\times\bm{H}_{DL} and \bm{m}\times\bm{H}_{FL} , on the magnetization of the FM layer under the influence of an external magnetic field ( \bm{H}_{ext} ). The geometry of the studied device is conceived as a cross like structure with an overall length of 10\,\mathrm{\mu m} and a width of the individual arms of 2\,\mathrm{\mu m} (see Fig. 1 a). The sensor is composed of a ferromagnetic (FM) layer of CoFeB ( 1\,\mathrm{nm} ) deposited on a heavy metal (HM) layer of Ta ( 6\,\mathrm{nm} ). A MgO ( 1.5\,\mathrm{nm} ) / Ta ( 5\,\mathrm{nm} ) heterostructure is subsequently deposited over the active layers, although this is not depicted in Fig. 1 a. This design enables the measurement of the perpendicular voltage ( V_{xy} ) in response to an applied current ( I_{xx} )(see Fig. 1 a). In order to describe the sensor principle we use the Landau-Lifshitz-Gilbert (LLG) equation augmented with the SOT torque. \partial_{t}\bm{m}=-\gamma\bm{m}\times\bm{H}^{\mathrm{eff}}+\alpha\bm{m}\times\partial_{t}\bm{m}+\bm{T} (1) where \gamma is the gyromagnetic ratio, \alpha the Gilbert damping factor and \bm{H}^{\mathrm{eff}} the effective magnetic field. The torque term \bm{T} Manchon et al. 2019 , \bm{T}=\gamma H_{FL}\bm{m}\times\bm{p}+\gamma H_{DL}\bm{m}\times\left(\bm{m}\times\bm{p}\right) (2) is orthogonal to the magnetization and can be expressed as a field-like (FL) part (first term) and a damping-like (DL) part (second term). The spin polarization is expressed with \bm{p} , which points in the positive y-direction ( \bm{p}=\left(0,1,0\right)^{\mathrm{T}} ) (see Fig. 1 b). H_{DL} and H_{FL} represent the amplitudes of the field components corresponding to the two distinct parts, which can be expressed over the SOT coefficients \eta_{FL} and \eta_{DL} with the following equation Koraltan et al. 2023 . H_{DL/FL}=p_{f}\cdot\eta_{DL/FL} (3) with p_{f}=\frac{{{j_{e}}\hbar}}{{2e{\mu_{0}}t{M_{s}}}} (4) Here is j_{e} the electrical current density flowing through the HM layer, t the thickness of the FM layer and M_{s} the saturation magnetization of the FM layer. The torque term Eq. ( 2 ) can be inserted in Eq. ( 1 ) as field contributions ( \bm{H}_{FL}=H_{FL}\bm{p} and \bm{H}_{DL}=H_{DL}\bm{m}\times\bm{p} , visible in Fig. 1 b), which act on the magnetization of the FM layer Abert, Claas 2019 . \partial_{t}\bm{m}=-\gamma\bm{m}\times\left(\bm{H}^{\mathrm{eff}}-H_{FL}\bm{p}-H_{DL}\bm{m}\times\bm{p}\right)+\alpha\bm{m}\times\partial_{t}\bm{m} (5) In low damping systems with magnetization initially along x due to an external magnetic field, the field-like torque acts like a field along z, pushing the magnetization out of the x–y plane and initiating precession. The damping-like torque pushes the magnetization toward –y, which in our case is opposite to the spin polarization, as illustrated in Fig. 1 b. If the current direction is flipped in the other direction, H_{DL} and H_{FL} change signs leading to opposite out-of-plane (OOP) magnetization. This can be described by analytically solving Eq.( 5 ) in the linear regime, assuming small fields in the x - and/or z -directions ( H_{x} , H_{z} ), and vanishing field in the y -direction ( H_{y}=0 ). The detailed calculation can be seen in Appendix A , which leads to m_{z,I\pm}=\frac{\mp H_{x}\left|p_{f}\right|\eta_{DL}+H_{z}(\left|p_{f}\right|\eta_{FL})}{{\left(\left|p_{f}\right|\eta_{DL}\right)}^{2}+(\left|p_{f}\right|\eta_{FL})(\left|p_{f}\right|\eta_{FL}-H_{k})} (6) Here H_{k} is the amplitude of the anisotropy field pointing in the z-direction. It can be seen if the z-magnetization ( m_{z,I-} ) with negative current is subtracted from the z-magnetization with positive current ( m_{z,I+} ) the response is only sensitive to H_{x} fields in first order, canceling any cross sensitivities. The signal corresponding to external x-fields ( S_{x} ) therefore takes the form S_{x}\left(H_{x}\right)=\frac{R_{s}}{2}\cdot\left(m_{z,I+}-m_{z,I-}\right)=-R_{s}\frac{\eta_{DL}H_{x}}{-\eta_{FL}H_{k}+(\eta_{DL}^{2}+\eta_{FL}^{2})\left|p_{f}\right|} (7) Here R_{s} is the anomalous Hall coefficient, used to convert the equation into units of \Omega (see Sec. VIII.2 ). This factor was introduced to compare simulation data with measured data. Alternatively, if the magnetizations from the two cases are added, the H_{x} component is canceled, leaving the system sensitive primarily to external H_{z} fields in first order. This yields the signal for z-fields ( S_{z} ), which allows the measurement of external fields without sensitivities in other directions. S_{z}\left(H_{z}\right)=\frac{R_{s}}{2}\cdot\left(m_{z,I+}+m_{z,I-}\right)=R_{s}\frac{\eta_{FL}H_{z}}{-\eta_{FL}H_{k}+(\eta_{DL}^{2}+\eta_{FL}^{2})\left|p_{f}\right|} (8) III Measurement of 3D magnetic fields Figure 2: a Measured R_{xy} for

Read the complete text