Coupled micro-resonators for second-order integrated nonlinear optics
Yannick Dumeige, Yoan Léger · 2025
Read Coupled micro-resonators for second-order integrated nonlinear optics by Yannick Dumeige, Yoan Léger (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-14959.txt.
Introduction
Yannick Dumeige and Yoan Léger study second order nonlinear optics in two coupled micro-resonators, in work from 2025. Two linked resonators can meet two key needs at once for nonlinear processes. Those needs are double resonance and phase matching, which are often hard to align in a single device.
Coupling splits the resonant frequencies, and that split helps satisfy both needs together. The analysis uses coupled mode theory for the paired system. It is then applied to second harmonic generation in two whispering gallery mode microdisks. The disks are made from III-V materials suited to integrated optics. Readers get a clear design route for compact frequency conversion on a chip.
Catalog record
| CREATOR | Yannick Dumeige, Yoan Léger |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 16 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-14959
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Coupled micro-resonators for second-order integrated nonlinear optics Yannick Dumeige, Yoan Léger Abstract We investigate second-order nonlinear processes in a system of two coupled identical optical micro-resonators. The double resonance and phase-matching conditions are simultaneously obtained thanks to the frequency splitting induced by the resonator coupling. The analysis made in the framework of the coupled mode theory is applied to the second harmonic generation process in two whispering gallery mode microdisks made in III-V materials. Optical micro-resonators are of great interest for nonlinear photonics since they enable simultaneously, high integration, low power operation and high stability Lin:17 . One of the most striking applications based on third order nonlinear optics in micro-resonators is the integration of frequency comb sources on a chip Stern:18 . second-order nonlinear optics can also take benefit from the use of optical micro-resonators which could lead to the miniaturization of frequency converters, optical parametric oscillators or entangled photon sources Liu:23 . In this aim, the platform of III-V semiconductors is promising since they have high second-order susceptibilities, high refractive index and direct band gap which let envisage micro- or nano-photonics nonlinear or quantum active devices Baboux:23 in a wide spectral band. Considering GaP for instance, the transparency domain ranges from 0.55~\mu\mathrm{m} to 11~\mu\mathrm{m} Wang:24 up to wavelength inaccessible to lithium niobate. III-V materials are isotropic, thus birefringence phase matching is not possible and several methods have been demonstrated to circumvent this issue Fiore:98 ; Dumeige:02 ; Ducci:04 ; Helmy:06 ; Pantzas:22 . In this context, natural quasi-phase matching in semiconductor whispering gallery mode (WGM) resonators have been proposed Dumeige:06a ; Lorenzo_Ruiz:20 and experimentally demonstrated Kuo:14 . Nevertheless, due to the very high dispersion of III-V semiconductors, practical implementations of this quasi-phase matching scheme also rely on the use of modal phase matching Mariani:14 ; Lake:16 ; Chang:19 reducing the effective nonlinear susceptibility due to a low interacting fields overlap. Furthermore, complex numerical techniques can be implemented to optimize the phase matching and the nonlinear overlap in the design of doubly resonant nonlinear photonic structures Simonneau:97 ; Bi:12 ; Lin:16 . From another point of view, it has been shown that the coupling of several resonators or of counter-propagating modes within a single resonator allows the control or the engineering of the dispersion in \chi^{(3)} processes Armaroli:15 ; Lu:23 ; Swarnava:25 . Coupled resonator structures can be used to reach functionalities which are not attainable with single nonlinear resonators Dumeige:06b . If we restrict ourselves to the case of second-order effects, only few works have been devoted to the coupling of nonlinear micro-resonators Xu:00 ; Dumeige:07b ; Dumeige:11 . In particular, it has been shown in the tight binding approximation that the dispersion induced by the weak coupling of resonators can be used to reach the phase matching condition for SHG in a long chain of \chi^{(2)} microcavities Xu:00 . In this paper, we propose a simple and comprehensive design method using the unique properties of the coupling between two identical WGM resonators to obtain the phase matching condition. Using a benchmark of GaP WGM microdisks, we show that the strong coupling between two resonators helps to reach the natural quasi-phase matching condition with low radial order modes in the process of second harmonic generation (SHG). This approach would lead to reach the low-power high-conversion regime on a chip. Figure 1 is a sketch of the structure studied in this paper. It consists of two rings or disks of radius R=L/\pi mutually coupled due to the overlap of the evanescent part of their modes. The resonators are coupled to two insertion and extraction waveguides with the same rate. The curvilinear abscissa along the resonator is called s . The fundamental (F) fields are denoted A_{i}(s)=\mathcal{A}_{i}(s)e^{j(\omega t-\beta_{1}s)} and the second harmonic (SH) fields B_{i}(s)=\mathcal{B}_{i}(s)e^{j(2\omega t-\beta_{2}s)} with i\in[1,8]_{\mathbb{N}} and where \beta_{1}(\omega) and \beta_{2}(2\omega) are respectively the propagation constants of the F and SF modes whose angular frequencies are respectively \omega and 2\omega . Figure 1: System of coupled ring or disk resonators of perimeter 2L . A_{i} and B_{i} are the F and SH mode amplitudes within the structure. k_{i} are the coupling between the access bus waveguides and the structure. \kappa_{i} are the coupling coefficient between the two resonators. A_{in} is the input F mode amplitude. A_{T} and B_{T} are the F and SH output mode amplitude on the trough port. A_{D} and B_{D} are the output mode amplitude on the drop port. k_{i} ans t_{i} are the coupling and transmission coefficients (with |k_{i}|^{2}+|t_{i}|^{2}=1 ) between the guides and the resonators, we can write the corresponding coupling matrices Yariv:00 \displaystyle M_{i}=\left(\begin{array}[]{cc}t_{i}&k_{i}\\ -k^{\ast}_{i}&t_{i}^{\ast}\\ \end{array}\right) where i=1 for the F field and i=2 for the SH field . The coupling between the two resonators is described by two coefficients \kappa_{i} and \tau_{i} (with also |\kappa_{i}|^{2}+|\tau_{i}|^{2}=1 ) and thus by the matrix \displaystyle P_{i}=\left(\begin{array}[]{cc}\tau_{i}&\kappa_{i}\\ -\kappa^{\ast}_{i}&\tau_{i}^{\ast}\\ \end{array}\right). We have for instance (A_{T}~A_{1})^{T}=M_{1}(A_{in}~A_{4})^{T} , (B_{D}~B_{7})^{T}=M_{2}(0~B_{6})^{T} and (A_{3}~A_{5})^{T}=P_{1}(A_{2}~A_{8})^{T} . We consider that the pump is undepleted and thus all the calculations are linear for the F fields. Using the matrices M_{1} and P_{1} it is straightforward to calculate the field A_{i}(s) at each point of the system Dumeige:06b . In the case of zinc-blende symmetry materials such as GaP, the second-order nonlinear susceptibility depends on s in the form \chi^{(2)}(s)=\chi_{0+}^{(2)}e^{j\frac{2s}{R}}+\chi_{0-}^{(2)}e^{-j\frac{2s}{R}} Dumeige:06a ; Yang:07 . The SH field is then calculated along each half perimeter of the resonator by integrating the following equation \frac{d\mathcal{B}_{2p+1}}{ds}=A_{2p+1}^{2}(s_{0})\left(\chi_{0+}^{(2)}e^{j\frac{2s}{R}}+\chi_{0-}^{(2)}e^{-j\frac{2s}{R}}\right)e^{j\Delta\beta s} (5) for p\in[0,3]_{\mathbb{N}} with \Delta\beta=\beta_{2}-2\beta_{1} ; s_{0}=0 for p=\{0,2\} and s_{0}=L for p=\{1,3\} . Defining \varphi_{2}=-\beta_{2}L , we obtain the expression of the amplitude of the output field on the trough port B_{T}=k_{2}Ke^{j\varphi_{2}}\frac{\left[H_{2}A_{1}^{2}+\frac{\kappa_{2}}{D}\left(t_{2}^{*}A_{5}^{2}+A_{7}^{2}e^{-j\varphi_{2}}\right)+A_{3}^{2}e^{-j\varphi_{2}}\right]}{1-t_{2}^{*}H_{2}e^{2j\varphi_{2}}} (6) with D=1-t_{2}^{*}\tau_{2}^{*}e^{2j\varphi_{2}}, (7) and where H_{2}(2\omega) is the linear transfer function of the right microdisk for the SH field (see Fig. 1 ) H_{2}=\frac{\tau_{2}-t_{2}^{*}e^{2j\varphi_{2}}}{1-t_{2}^{*}\tau_{2}^{*}e^{2j\varphi_{2}}}. (8) For zinc-blende symmetry materials, the nonlinear coupling is characterized by K=j\left[\chi_{0+}^{(2)}\frac{1-e^{\widetilde{j\Delta\beta}_{+}L}}{\widetilde{\Delta\beta}_{+}}+\chi_{0-}^{(2)}\frac{1-e^{j\widetilde{\Delta\beta}_{-}L}}{\widetilde{\Delta\beta}_{-}}\right] (9) where the effective phase mismatch \widetilde{\Delta\beta}_{\pm} is defined as \widetilde{\Delta\beta}_{\pm}=\Delta\beta\pm\frac{2}{R}. (10) We apply the previous model to the case of two identical coupled GaP microdisks grown along the z=[001] crystallographic axis and embedded in air as described in Fig. 2 . The disks are separated by an air gap g , their thickness is H=136~\mathrm{nm} and their radius R=2.7~\mu\mathrm{m} . Figure 2: Description of the structure numerically studied consisting of two GaP WGM microdisks embedded in air. a) side view and b) top view. g is the air gap separating the two disks, H and R are their thickness and radius. The properties of the system is obtained from the optical properties of a single resonator. The confinement in the z -direction is taken into account using the effective index method (EIM) Kuo:11 . We used the lowest order guided modes in the z -direction both for the F and SH frequencies to optimize the effective nonlinear susceptibility. Due to the \overline{4}3m symmetry of the GaP, the F field is chosen polarized in the (x,y) plan which gives an SH field polarized in the z -direction. Thus in the EIM framework, the F field is TE polarized whereas the SH field in TM polarized. The effective propagation constants calculated using this approximation are noted \gamma_{1} and \gamma_{2} respectively for the F and SF fields. The propagation constants \beta_{1} and \beta_{2}