Simultaneous Charge Carrier Density Mapping of SiC Epilayers and Substrates with Terahertz Time-Domain Spectroscopy Journal: opticajournal Publication type: Research Article

Joshua Hennig 1,2,*, Jens Klier 1, Stefan Duran 1, Kuei-Shen Hsu 3, Jan Beyer 3, Christian Röder 4, Franziska C. Beyer 4, Nadine Schüler 5, Nico Vieweg 6, Katja Dutzi 6, Georg von Freymann 1,2, and Daniel Molter 1 · 2025

Read Simultaneous Charge Carrier Density Mapping of SiC Epilayers and Substrates with Terahertz Time-Domain Spectroscopy Journal: opticajournal Publication type: Research Article by Joshua Hennig 1,2,*, Jens Klier 1, Stefan Duran 1, Kuei-Shen Hsu 3, Jan Beyer 3, Christian Röder 4, Franziska C. Beyer 4, Nadine Schüler 5, Nico Vieweg 6, Katja Dutzi 6, Georg von Freymann 1,2, and Daniel Molter 1 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-14945.txt.

Introduction

Silicon carbide chips carry the high voltages in modern power electronics, and makers need to check how heavily each wafer is doped without touching it. Joshua Hennig and a team of co-authors use pulses of terahertz light, timed precisely, to read the charge carrier density. Their method covers both a thin grown layer and the wafer beneath it in one shot, reflecting the pulses off the sample.

Across a wide doping span, from about ten to the fifteenth up to ten to the eighteenth carriers per cubic centimeter, the readings held up. Scanning the beam maps doping differences across a whole wafer. Calculations in the paper confirm the approach and chart the layer thicknesses where it works best for the common 4H form of the material.

Catalog record

CREATORJoshua Hennig 1,2,*, Jens Klier 1, Stefan Duran 1, Kuei-Shen Hsu 3, Jan Beyer 3, Christian Röder 4, Franziska C. Beyer 4, Nadine Schüler 5, Nico Vieweg 6, Katja Dutzi 6, Georg von Freymann 1,2, and Daniel Molter 1
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE37 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-14945

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Simultaneous Charge Carrier Density Mapping of SiC Epilayers and Substrates with Terahertz Time-Domain Spectroscopy Journal: opticajournal Publication type: Research Article Joshua Hennig 1,2,*, Jens Klier 1, Stefan Duran 1, Kuei-Shen Hsu 3, Jan Beyer 3, Christian Röder 4, Franziska C. Beyer 4, Nadine Schüler 5, Nico Vieweg 6, Katja Dutzi 6, Georg von Freymann 1,2, and Daniel Molter 1 Abstract With the growing demand for efficient power electronics, SiC-based devices are progressively becoming more relevant. In contrast to established methods such as the mercury capacitance-voltage technique, terahertz spectroscopy promises a contactless characterization. In this work, we simultaneously determine the charge carrier density of SiC epilayers and their substrates in a single measurement over a wide range of about 8 × \times 10 15 cm -3 to 4 × \times 10 18 cm -3 using time-domain spectroscopy in a reflection geometry. Furthermore, inhomogeneities in the samples are detected by mapping the determined charge carrier densities over the whole wafer. Additional theoretical calculations confirm these results and provide thickness-dependent information on the doping range of 4H-SiC, in which terahertz time-domain spectroscopy is capable of determining the charge carrier density. 1 Introduction Silicon carbide (SiC) is a modern semiconductor material that has become established for certain power devices such as diodes or transistors for specific applications over the last three decades [ 1 , 2 , 3 ] . Perspectively, it is expected to become even more applied in further fields, e.g., in electric vehicles, electric train traction, wind turbines, or photovoltaic inverters [ 4 , 5 ] . Therefore, it plays an important role in power electronic devices and energy converters, which are necessary for the energy transition. The advantages of SiC-based devices over silicon-based devices are their increased thermal stability due to a higher melting point and thermal conductivity, as well as an increased robustness and compatibility to higher voltages due to a higher breakdown electric field and a wider bandgap [ 1 , 6 ] . With the further growing need for devices in demanding environments, that can benefit from these advantages, technologies to characterize relevant properties such as the charge carrier density of doped SiC epilayers are necessary. The established technique to measure the charge carrier density of SiC epilayers is the mercury capacitance-voltage (mCV) technique [ 7 , 8 , 9 ] . Unlike other contact-based measurement techniques used to measure the resistivity, such as the four-point probe method [ 10 , 11 ] , mCV is used to directly measure the charge carrier density [ 8 ] . However, mCV is also a contact-based method, with certain disadvantages coming along with it. These include that contact with another material can potentially affect or damage the semiconductor material under test and the measurement technique is comparably slow due to the time necessary to prepare the contact. Additionally, there is the problem to remove the mercury from the surface residue-free, thus wafers can be further processed without contamination issues. These drawbacks, together with a strong dependence on the contacted area as well as potentially necessary surface preparation [ 9 ] , illustrate the need of a non-contact measurement technique for the charge carrier density from both an industrial as well as a scientific point of view. One alternative method to access the doping concentration optically is Raman spectroscopy. Based on the frequency shift of the LO phonon plasmon coupled (LOPC) mode due to the change in charge carrier density in doping ranges above 2 \times 10^{16} cm -3 [ 12 ] . Another non-contact method is the fairly new corona-charge non-contact capacitance voltage technique (CnCV). It requires a corona discharge to precisely deposit charge increments on the surface of the sample, which is placed on a movable conducting chuck, held in place by vacuum. In a next step, the sample is moved to a Kelvin probe, where the CV measurement is performed in a scanning mode. From this measurement, the charge carrier density can be retrieved. Afterwards, the additional corona charges are removed by UV illumination [ 13 ] . However, both of these methods are comparably complex and therefore not yet established as standard techniques. Terahertz time-domain spectroscopy (TDS) enables a measurement of the charge carrier density that is completely non-contact, allows measurements under ambient conditions, and is potentially faster than mCV. Since the first realizations of photoconductive antennas and the appearances of TDS [ 14 , 15 , 16 ] , it has found applications, e.g., in non-destructive material testing and characterization such as layer thickness measurements [ 17 , 18 , 19 ] , defect detection [ 20 , 21 ] , spectroscopy of dangerous or illegal substances [ 22 , 23 ] , measurements of dielectrics [ 24 , 25 ] , and historical art analysis [ 26 ] . Remarkably, the potential of TDS to characterize electrical properties such as the resistivity of semiconductor materials had been demonstrated already in early pioneering works [ 27 , 28 ] . This branch of terahertz research has continued to advance since then, leading to the analysis of highly doped thin films [ 29 ] and two-dimensional materials [ 30 ] such as graphene [ 31 ] . Although the classical approach of TDS to measure in transmission geometry is widely used, measuring in reflection geometry allows one to retrieve information from optically dense samples that are not transparent to terahertz radiation [ 32 , 33 , 34 ] . This is the case for doped 4H-SiC epilayers which are typically grown on highly doped 4H-SiC substrates by chemical vapor deposition [ 35 , 36 , 37 ] . While for example for GaN, the characterization of epilayers with TDS had been demonstrated before [ 38 ] , this has – to the best of our knowledge – not been achieved for SiC, yet. 2 4H-SiC model Silicon carbide has a large number of more than 250 polytypes [ 39 ] . However, only a small number of them are commonly used, including 4H-SiC, which has multiple industrial applications [ 1 ] . This polytype has a hexagonal crystal structure, as the name suggests. (a) (b) Figure 1: (a) Crystal structure of 4H-SiC showing the stacking sequence of C and Si atoms, forming a Si-C double layer. 1, 2, and 3 denote the occupation sites. (b) Unit cell (thick lines) in the hexagonal structure of 4H-SiC with the three translation vectors and the c-axis. Sketches inspired by [ 40 , 41 , 42 ] The crystal structure of 4H-SiC is sketched in Fig. 1 (a). The numbers 1, 2, and 3 denote the different occupation sites for a Si-C double layer. After four Si atoms and four C atoms, the structure is repeated. Fig. 1 (b) shows a unit cell of the hexagonal crystal structure, highlighted by the thick lines. The translation vectors \boldsymbol{a}_{1} , \boldsymbol{a}_{2} , and \boldsymbol{a}_{3} span a coordinate system. The (0001) plane is marked in green and perpendicular to the c-axis of the hexagonal material. The optical and electrical properties of a semiconductor, e.g., Si can be described by the Drude model [ 33 ] . This also holds for SiC [ 43 ] . In the Drude model, the complex relative permittivity

Read the complete text