Revised identification of strain gradient elastic parameters

Luca Placidi 1, Anil Misra 2, Gabriele La Valle 3, Casey Rodriguez 4 · 2025

Read Revised identification of strain gradient elastic parameters by Luca Placidi 1, Anil Misra 2, Gabriele La Valle 3, Casey Rodriguez 4 (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-14932.txt.

Introduction

Luca Placidi, Anil Misra, Gabriele La Valle, and Casey Rodriguez publish a correction to their own earlier work in a twenty twenty-five paper. The earlier work derived elastic parameters for strain gradient materials from a granular micromechanics model. Such models build a material's stiffness from the motion of grain pairs.

The authors state plainly that key terms in the grain-pair displacement were misidentified when the second gradient of placement was counted. They re-derive the expression, and the fixed terms change the strain energy and the gradient parameters found before. The standard first-gradient elastic tensor is unchanged. Corrected stiffness forms are given for both flat and full three-dimensional cases.

Catalog record

CREATORLuca Placidi 1, Anil Misra 2, Gabriele La Valle 3, Casey Rodriguez 4
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-14932

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Revised identification of strain gradient elastic parameters Luca Placidi 1, Anil Misra 2, Gabriele La Valle 3, Casey Rodriguez 4 Abstract . The work reported in “Granular micromechanics-based identification of isotropic strain gradient parameters for elastic geometrically nonlinear deformations" misidentified key terms in the grain-pair objective relative displacement when accounting for the second gradient of placement. In this paper, we correct that oversight by deriving a revised expression for the grain-pair objective relative displacement within the granular micromechanics framework. The amended terms, which resemble Christoffel symbols expressed in terms of strain gradients, modify the contributions of both the normal and tangential components to the strain energy and, consequently, alter the identified strain gradient elastic parameters. Importantly, the identification of the standard (first gradient) elastic tensor remains unchanged. This brief paper presents the corrected derivation, the resulting stiffness tensors for anisotropic strain gradient elasticity, and updated analytical expressions for the material parameters in both 2D and 3D isotropic settings. 1. Introduction In recent years, strain gradient elasticity theories have garnered significant attention for their ability to capture size-dependent mechanical behavior in nano-structured materials and metamaterials, where classical continuum models fail to provide accurate predictions [ 44 , 45 , 46 , 47 , 48 ] . These advanced models, particularly those incorporating higher-order or second strain gradient effects, have been successfully applied to investigate a wide range of phenomena, such as wave propagation in periodic nanostructures and graphene sheets [ 2 , 3 , 4 ] , static and dynamic analyses of nanoplates and nanobeams [ 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 ] , and hygro-thermal responses of functionally graded and magneto-electro-elastic nano-components [ 10 , 11 , 12 , 13 ] . Among these, strain gradient elasticity—particularly its higher-order and second-gradient formulations—has proven effective in describing phenomena such as wave dispersion, localization, and boundary layer effects in nano-beams, plates, and metamaterials [ 14 , 16 , 17 , 18 , 19 , 20 , 21 , 22 ] . Computational approaches leveraging meshless methods [ 5 , 6 , 7 ] , finite element techniques [ 15 , 19 ] , and semi-analytical formulations [ 12 ] have further enhanced the applicability of strain gradient models to complex geometries and loading conditions. Moreover, recent developments in homogenization techniques and metamaterial modeling have emphasized the role of second gradient continua in capturing microscale interactions and deformation patterns in engineered structures [ 23 , 24 , 25 , 31 , 32 , 33 , 34 ] . Despite this growing body of work, the accurate identification of strain gradient elastic coefficients—crucial for both predictive modeling and material design—remains an open challenge. In this context, the present study aims to contribute to this field by proposing a robust framework for the identification of such coefficients, thereby advancing the reliability and effectiveness of strain gradient theories in engineering applications. In other words, a central challenge in deploying these models lies in the accurate identification of the additional constitutive parameters introduced by gradient elasticity. While most existing works focus on the implementation of gradient theories in numerical and analytical frameworks, including finite element and meshless methods [ 17 , 18 , 27 , 28 ] , only a limited number of studies address the direct physical interpretation and quantitative determination of the gradient moduli. Recent advances, particularly those based on homogenization [ 29 , 30 , 35 , 39 ] and microstructure-informed modeling [ 37 , 38 , 40 , 41 , 42 ] , have paved the way toward more physically grounded identification techniques. Further developments in this direction include the use of multiscale and stress-driven models [ 26 , 36 , 43 , 44 , 45 ] , as well as numerical studies of lattice and pantographic structures [ 31 , 32 , 33 , 34 ] . Building on these foundations, the present study introduces a granular micromechanical approach for the identification of strain gradient elastic moduli, grounded in the physical interpretation of microscale interactions and compatible with continuum models of second-gradient type. This contribution seeks to bridge the gap between micromechanical modeling and constitutive parameter identification, enabling more predictive and physically consistent applications of strain gradient elasticity. 2. A recap before the correction In granular micromechanics, the density of the (internal) strain energy is, according to (15) of [ 1 ] , the integral of the energy of each orientation \hat{c} over the unit circle S^{\mathrm{1}} in the 2D case or over the unit sphere S^{2} in the 3D case, U=\int_{\mathcal{S^{\mathrm{1,2}}}}\left(\frac{1}{2}k_{\eta}u_{\eta}^{2}+\frac{1}{2}k_{\tau}u_{\tau}^{2}\right)dS, (1) where k_{\eta} is the normal stiffness relative to the orientation \hat{c} , k_{\tau} is the tangent stiffness relative to the orientation \hat{c} , and dS is the angular element over S^{\mathrm{1}} or S^{2} . In addition, u_{\eta} is the normal displacement, which is a scalar, and u_{\tau} is the tangent displacement, which is a vector. The normal displacement is defined by equation (11) of [ 1 ] , u_{\eta}=\frac{1}{2}u^{np}\cdot\hat{c}=\frac{1}{2}u_{i}^{np}\hat{c}_{i}, (2) and the tangential displacement by the equation (12) of [ 1 ] , u_{\tau}=u^{np}-\left(u^{np}\cdot\hat{c}\right)\hat{c}=u^{np}-2u_{\eta}\hat{c}. (3) In ( 2 - 3 ) we use the definition of the objective relative displacement, u^{np} , which is defined below (see ( 4 )). 3. The objective relative displacement and its projections The objective relative displacement is, from the first equivalence of the equation (9) of [ 1 ] , u^{np}=2G\hat{c}L+\frac{L^{2}}{2}\left(F^{T}\nabla F\right)\hat{c}\hat{c}, (4) where G is the Green-Saint-Venant strain tensor, G=\frac{1}{2}\left(F^{T}F-I\right), (5) F is the deformation gradient, F=\nabla\chi, (6) \chi is the placement function, \hat{c} is a unit vector, L is average distance between the neighboring grain-pairs and \nabla is the gradient operator. In index notation ( 4 ) yields u_{i}^{np}=2G_{ij}\hat{c}_{j}L+\frac{L^{2}}{2}F_{ia}^{T}\left(\nabla F\right)_{abc}\hat{c}_{c}\hat{c}_{b}=2G_{ij}\hat{c}_{j}L+\frac{L^{2}}{2}H_{ibc}\hat{c}_{c}\hat{c}_{b}, (7) where the definition ( 5 ) has been taken into account. H_{ibc}=F_{ai}F_{ab,c}=\chi_{a,i}\chi_{a,bc}=H_{icb} is a third order tensor, symmetric with respect the last two indices. The error of equation (9) in [ 1 ] is due to a wrong identification of the last term of ( 7 ), \frac{L^{2}}{2}H_{ibc}\hat{c}_{c}\hat{c}_{b}\rightarrow\frac{L^{2}}{2}G_{ib,c}\hat{c}_{c}\hat{c}_{b}, which is simply an oversight. Indeed, it is possible to prove the following identity for the components of the tensor H , similar in form to Christoffel symbols: H_{ibc}=G_{ib,c}+G_{ic,b}-G_{bc,i}. (8) Let us prove ( 8 ). From ( 5 ) we have G_{ij}=\frac{1}{2}\left(F_{ki}F_{kj}-\delta_{ij}\right). Its gradient is G_{ij,h}=\frac{1}{2}\left(F_{ki,h}F_{kj}+F_{ki}F_{kj,h}\right). (9) Thus, by changing the names of the indices of ( 9 ) we have the following three expressions, \displaystyle G_{ib,c} \displaystyle=\frac{1}{2}\left(F_{ki,c}F_{kb}+F_{ki}F_{kb,c}\right), \displaystyle G_{ic,b} \displaystyle=\frac{1}{2}\left(F_{ki,b}F_{kc}+F_{ki}F_{kc,b}\right), \displaystyle G_{bc,i} \displaystyle=\frac{1}{2}\left(F_{kb,i}F_{kc}+F_{kb}F_{kc,i}\right). From the previous three equations, the combination expressed on th right-hand side of ( 8 ) yields G_{ib,c}+G_{ic,b}-G_{bc,i}=\frac{1}{2}\left(F_{ki,c}F_{kb}+F_{ki}F_{kb,c}+F_{ki,b}F_{kc}+F_{ki}F_{kc,b}-F_{kb,i}F_{kc}-F_{kb}F_{kc,i}\right). (10) Because of the symmetry on the last two indices of the gradient of the deformation gradient in ( 6 ), \left(\nabla F\right)_{abc}=F_{ab,c}=\chi_{a,bc}=\chi_{a,cb}=F_{ac,b}=\left(\nabla F\right)_{acb}, the last two terms of ( 10 ) cancel the first, and the third terms and the second term equals the fourth one. As a consequence, we have, G_{ib,c}+G_{ic,b}-G_{bc,i}=F_{ki}F_{kb,c}=H_{ibc}=H_{icb}, proving ( 8 ). Thus, the objective relative displacement is given by the insertion of ( 8 ) into ( 7 ) u_{i}^{np}=2G_{ij}\hat{c}_{j}L+\frac{L^{2}}{2}\left(G_{ib,c}+G_{ic,b}-G_{bc,i}\right)\hat{c}_{c}\hat{c}_{b}. (11) The normal displacement u_{\eta} is defined by equation (11) of [ 1 ] . The insertion of ( 11 ) into the definition yields, u_{\eta}=\frac{1}{2}u_{i}^{np}\hat{c}_{i}=G_{ij}\hat{c}_{i}\hat{c}_{j}L+\frac{L^{2}}{4}\left(G_{ib,c}\hat{c}_{i}\hat{c}_{c}\hat{c}_{b}+G_{ic,b}\hat{c}_{i}\hat{c}_{c}\hat{c}_{b}-G_{bc,i}\hat{c}_{i}\hat{c}_{c}\hat{c}_{b}\right). (12) The first and the third

Read the complete text