Application of the optimized-basis generator coordinate method to low-lying excited states of sd-shell nuclei

Moemi Matsumoto, Yusuke Tanimura, Kouichi Hagino · 2025

Read Application of the optimized-basis generator coordinate method to low-lying excited states of sd-shell nuclei by Moemi Matsumoto, Yusuke Tanimura, Kouichi Hagino (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-13147.txt.

Introduction

Moemi Matsumoto and co-authors apply an optimized-basis method to light nuclei in a 2025 paper. The generator coordinate method mixes many nuclear shapes to build states. Choosing the shapes well is an art. Their variant tunes both the shapes and their mixing weights together.

Angular momentum projection is added for excited states. Three sd-shell nuclei, neon, magnesium, and silicon, serve as tests under a Skyrme force. Joint tuning lowers excited state energies. Transition probabilities shift appreciably as well. The results argue that letting the basis optimize itself pays off in nuclear structure calculations, where every fraction of accuracy counts.

Catalog record

CREATORMoemi Matsumoto, Yusuke Tanimura, Kouichi Hagino
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-13147

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Application of the optimized-basis generator coordinate method to low-lying excited states of sd-shell nuclei Moemi Matsumoto, Yusuke Tanimura, Kouichi Hagino Abstract We apply the optimized-basis generator coordinate method (OptGCM) to sd-shell nuclei, 20 Ne, 24 Mg, and 28 Si. This method variationally optimizes both the basis Slater determinants in the generator coordinate method (GCM) and the corresponding weight coefficients. To analyze the low-lying excited states of those nuclei, we implement the angular momentum projection. With the Skyrme interaction, we show that the simultaneous optimzation of the basis functions and the weight factors lowers the energy of the excited states and at the same time leads to an appreciable effect on transition probabilities. These results highlight the effectiveness of the OptGCM method. I Introduction Collective motion is a characteristic feature of quantum many-body systems. In atomic nuclei, it has been known that various types of collective motions appear, such as the rotational motion of deformed nuclei and surface vibrations of spherical nuclei. The amplitude of those motions are often large, beyond the quadratic approximation around the ground state. Such large-amplitude collective motions play a crucial role in several phenomena in atomic nuclei, such as nuclear fission and shape coexistence. To develop microscopic theories for collective motions is one of the central challenges in nuclear physics. Among such theories, the generator coordinate method (GCM) has been widely employed as a beyond-mean-field approach to large-amplitude collective motions Ring and Schuck 1980 ; Bender et al. 2003a ; Nikšić et al. 2011 ; Younes et al. . In this method, a many-body state is constructed as a linear combination of configurations generated along specified collective coordinates, that characterize the essential degrees of freedom of the dynamics. The weight coefficients of the linear superposition are determined variationally. This method has been extensively used in nuclear structure theory, after implementing restoration of broken symmetries with the parity and the angular momentum projections Yao et al. 2013 ; Fu et al. 2013 ; Yao et al. 2015a ; Yao et al. 2015b ; Bender and Heenen 2003 ; Bender et al. 2003b ; Bally et al. 2014 ; Duguet et al. 2003 ; Rodríguez and Luis Egido 2008 ; Rodríguez-Guzmán et al. 2002 ; Rodríguez-Guzmán et al. 2004 ; Rodríguez and Egido 2007 ; Robledo et al. 2018 ; Rodríguez-Guzmán et al. 2012 . A potential drawback of this method is that the selection of collective coordinates often relies on empirical knowledge. For instance, multipole moments of atomic nuclei have often been employed for such collective coordinates, but these may not be sufficient to accurately describe a given system. This problem represents a longstanding and significant challenge inherent to the method Ring and Schuck 1980 . As a matter of fact, recent studies have demonstrated that the conventional empirical approaches to select collective coordinates may be insufficient to efficiently capture collective dynamics Hizawa et al. 2021 ; Hizawa et al. 2022 ; Kumar and Robledo 2023 . It is thus desirable to develop frameworks that do not rely on pre-fixed collective coordinates, in order not to miss essential degrees of freedom. Towards this direction, a stochastic selection of the basis has been considered in Refs. Itagaki et al. 2003 ; Descouvemont and Itagaki 2018 ; Descouvemont and Itagaki 2020 ; Shinohara et al. 2006 ; Fukuoka et al. 2013 . Methods based on configuration interaction have also been proposed in Refs. Faessler and Plastino 1969 ; Satpathy and Ho-Kim 1970a ; Satpathy and Ho-Kim 1970b ; Pillet et al. 2017 ; Robin et al. 2016 ; Robin et al. 2017 . Recently, we have developed a variational extension of the GCM (the optimized-basis GCM: OptGCM) that allows simultaneous optimization of both the single-particle states of the basis Slater determinants (SDs) and their corresponding weight coefficients Matsumoto et al. 2023 . See also Ref. Shimizu et al. 2012 and Refs. Myo et al. 2023 ; Hasegawa et al. 2020 for similar attempts in the frameworks of the Monte-Carlo shell model (MCSM) Shimizu et al. 2012 and antisymmetrized molecular dynamics (AMD) Myo et al. 2023 ; Hasegawa et al. 2020 , respectively. In our previous work Matsumoto et al. 2023 ; Matsumoto et al. 2024 , we applied the OptGCM to the intrinsic ground states of 16 O and 28 Si, and demonstrated that the basis optimization leads to a better description of the ground state of the systems. In this paper, we extend our previous study and apply the OptGCM to study low-lying excited states of atomic nuclei Matsumoto et al. 2025 . To this end, we implement the angular momentum projection and compute spectra and transition probabilities of sd -shell nuclei. The paper is organized as follows. In Sec. II, we detail the formalism of the OptGCM with angular momentum projection. In Sec. III, we apply the OptGCM to 20 Ne, 24 Mg, and 28 Si and discuss the role of basis optimization. We then summarize the paper in Sec. IV with future perspectives. II Method II.1 Optimized-basis GCM (OptGCM) In the GCM method, the trial wave function is expressed as |\Psi\rangle=\sum_{a=1}^{M}f_{a}|\Phi_{a}\rangle, (1) where |\Phi_{a}\rangle are SDs constructed as antisymmetrized products of A orthonormal single-particle orbitals \varphi^{(a)}_{i} ( i=1,\ldots,A ), A being the mass number of a nucleus. The total energy is given by E=\frac{\langle\Psi|H|\Psi\rangle}{\langle\Psi|\Psi\rangle}=\frac{\sum_{ab}f_{a}^{*}f_{b}H_{ab}}{\sum_{ab}f_{a}^{*}f_{b}N_{ab}}, (2) where N_{ab}=\langle\Phi_{a}|\Phi_{b}\rangle and H_{ab}=\langle\Phi_{a}|H|\Phi_{b}\rangle denote the norm and Hamiltonian kernels, respectively. In the usual GCM, the energy is minimized with respect only to the weight coefficients f_{a} for a pre-fixed Slater determinants, |\Phi_{a}\rangle . In contrast, In the OptGCM, the total energy is minimized with respect both to the weight coefficients f_{a} and the single-particle orbitals \varphi^{(a)}_{i} Matsumoto et al. 2023 . That is, we impose the conditions of \cfrac{\partial E}{\partial f_{a}^{*}}=0, (3) and \cfrac{\delta E}{\delta\varphi_{i}^{(a)*}}=0. (4) Note that Eq. ( 3 ) yields the Hill-Wheeler equation, which is coupled to the equation for the single-particle wave functions, Eq. ( 4 ). We carry out the optimization with the conjugate gradient method Press et al. 1986 , with initial SDs constructed with Woods-Saxon potentials with various quadrupole deformations. For the initial weight coefficients, we take f_{a}=1 for all a . In this work, we adopt the SIII parameter set of the Skyrme energy density functional Beiner et al. 1975 , and expand the single-particle wave functions on an axial harmonic oscillator basis Vautherin 1973 with 14 major shells. We impose axial and reflection symmetries, while we neglect the time-odd terms in the functional. The pairing correlations are also omitted for simplicity. II.2 Angular momentum projection To directly compare theoretical results with experimental data, it is essential to restore rotational symmetry through the angular momentum projection. Ideally, the basis SDs in the OptGCM should be variationally optimized for each angular momentum I . Since this procedure is computationally demanding, we, as a first step, adopt a simplified approach, in which the basis SDs are optimized without the angular momentum projection. That is, we take the variation before the projection (VBP) for the angular momentum projection, rather than the variation after the projection (VAP). To this end, we first optimize the basis SDs |\Phi_{a}\rangle and the weight coefficients f_{a} for the intrinsic ground states, as described in the previous subsection. After the optimum

Read the complete text