EasyDRAM: An FPGA-based Infrastructure for Fast and Accurate End-to-End Evaluation of Emerging DRAM Techniques

Oğuzhan Canpolat † \dagger § Ataberk Olgun § David Novo ∥ \parallel Oğuz Ergin ‡ \ddagger § † \dagger Onur Mutlu § § ETH Zürich † \dagger TOBB ETÜ ∥ \parallel LIRMM, Univ. Montpellier, CNRS ‡ \ddagger University of Sharjah · 2025

Read EasyDRAM: An FPGA-based Infrastructure for Fast and Accurate End-to-End Evaluation of Emerging DRAM Techniques by Oğuzhan Canpolat † \dagger § Ataberk Olgun § David Novo ∥ \parallel Oğuz Ergin ‡ \ddagger § † \dagger Onur Mutlu § § ETH Zürich † \dagger TOBB ETÜ ∥ \parallel LIRMM, Univ. Montpellier, CNRS ‡ \ddagger University of Sharjah (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-10441.txt.

Introduction

Canpolat and co-authors built a test rig for new ideas in computer memory. Memory chips shape how fast and how safe a whole machine runs. Fresh tricks for these chips are hard to judge, since they touch many layers of a system at once. Older test rigs based on FPGA boards demand rare hardware coding skills.

Their rig, EasyDRAM, lets builders write memory tricks in a common high level language. The rig runs the design on real memory chips through a programmable controller. A time scaling trick fixes a speed gap: real processors run faster than the test boards can mimic. The team released the full design as open source for other labs to use.

Catalog record

CREATOROğuzhan Canpolat † \dagger § Ataberk Olgun § David Novo ∥ \parallel Oğuz Ergin ‡ \ddagger § † \dagger Onur Mutlu § § ETH Zürich † \dagger TOBB ETÜ ∥ \parallel LIRMM, Univ. Montpellier, CNRS ‡ \ddagger University of Sharjah
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE68 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-10441

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

EasyDRAM: An FPGA-based Infrastructure for Fast and Accurate End-to-End Evaluation of Emerging DRAM Techniques Oğuzhan Canpolat † \dagger § Ataberk Olgun § David Novo ∥ \parallel Oğuz Ergin ‡ \ddagger § † \dagger Onur Mutlu § § ETH Zürich † \dagger TOBB ETÜ ∥ \parallel LIRMM, Univ. Montpellier, CNRS ‡ \ddagger University of Sharjah Abstract DRAM is a critical component of modern computing systems. Recent works propose numerous techniques (that we call DRAM techniques ) to enhance DRAM-based computing systems’ throughput, reliability, and computing capabilities (e.g., in-DRAM bulk data copy). Evaluating the system-wide benefits of DRAM techniques is challenging as they often require modifications across multiple layers of the computing stack. Prior works propose FPGA-based platforms for rapid end-to-end evaluation of DRAM techniques on real DRAM chips. Unfortunately, existing platforms fall short in two major aspects: (1) they require deep expertise in hardware description languages, limiting accessibility; and (2) they are not designed to accurately model modern computing systems. We introduce EasyDRAM, an FPGA-based framework for rapid and accurate end-to-end evaluation of DRAM techniques on real DRAM chips. EasyDRAM overcomes the main drawbacks of prior FPGA-based platforms with two key ideas. First, EasyDRAM removes the need for hardware description language expertise by enabling developers to implement DRAM techniques using a high-level language (C++). At runtime, EasyDRAM executes the high-level software-defined memory system design in a programmable memory controller. Second, EasyDRAM tackles a fundamental challenge in accurately modeling modern systems: real processors typically operate at significantly higher clock frequencies than DRAM, a disparity that is difficult to replicate on FPGA platforms. EasyDRAM addresses this challenge by decoupling the processor–DRAM interface and advancing the system state using a novel technique we call time scaling , which faithfully captures the timing behavior of the modeled system. We validate EasyDRAM’s evaluation accuracy by comparing the memory latency profile of a real CPU-based system and its modeled implementation using EasyDRAM. We demonstrate the ease of use of EasyDRAM by evaluating two DRAM techniques end-to-end in a real FPGA-based system: (1) in-DRAM bulk data copy (i.e., RowClone) and (2) reduced-latency DRAM access that exploits the latency variation across DRAM cells. Implementing these two techniques requires no hardware modifications and only 325 lines of C++ code over EasyDRAM’s extensible code base. We compare our results to prior FPGA-based platforms. EasyDRAM yields more accurate results (e.g., by ≈ \approx{}\! 20 × \times{} for execution time) than the state-of-the-art related platform. We believe and hope that EasyDRAM will enable innovative ideas in memory system design to rapidly come to fruition. To aid future research, we open-source our EasyDRAM implementation at https://github.com/CMU-SAFARI/EasyDRAM . \bstctlcite IEEEexample:BSTcontrol 1 Introduction DRAM-based main memory is a critical component in modern computing systems. Many prior works show that DRAM is increasingly becoming the primary bottleneck for system performance and energy efficiency [ 1 , 2 , 3 , 4 ] as the demand for higher performance, reduced latency, and increased capacity is growing. To meet these requirements, many prior works [ 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 , 36 ] introduce new operations (we call these operations DRAM techniques ) that violate timings set by the DRAM manufacturers to improve the latency and computing capabilities of DRAM. Evaluating the system-wide benefits of DRAM techniques is non-trivial as they require modifications across multiple layers of the computing stack (e.g., memory controllers, memory mapping and allocation in the operating system, and user applications), and require DRAM to be operated outside the current DRAM standards (e.g., [ 37 , 38 ] ). For example, it is possible to reliably copy bulk data at DRAM row granularity [ 39 ] (typically 8 KiB) by issuing row activation commands in quick succession in real DRAM chips [ 35 , 32 , 20 , 40 , 41 , 19 , 18 ] . However, the DRAM command sequence to perform such copy operations is undefined in the current DRAM standards (e.g., [ 38 , 37 , 42 , 43 ] ). Hence, commercial off-the-shelf computing systems do not perform those copy operations. To alleviate the limitations of commercial systems in evaluating DRAM techniques, software simulators (e.g., [ 44 , 45 , 46 , 47 , 48 ] ) can be used to rapidly model system support for DRAM techniques. However, simulators have two key drawbacks. First, correctly implementing the behavior of DRAM techniques would require rigorous characterization studies and modeling efforts by domain experts [ 49 , 31 , 5 , 6 , 9 , 50 , 14 , 7 , 51 , 12 , 52 , 36 ] because a software simulator does not use a real DRAM chip. Second, existing simulators exhibit slow simulation speeds (e.g., only a few kHz [ 53 ] ), thereby requiring a large amount of time (e.g., days or weeks) to execute full-system workloads end-to-end. To overcome the limitations of commercial systems and software simulators in evaluating DRAM techniques, prior works [ 54 , 40 , 55 , 41 , 56 , 57 , 58 , 59 ] propose a variety of FPGA-based evaluation platforms that are broadly categorized into three classes: (1) DRAM testing platforms, (2) FPGA-based simulators, and (3) FPGA-based emulators. These platforms suffer from key drawbacks that prevent their users from rapidly and accurately evaluating DRAM techniques end-to-end. Drawbacks of Existing FPGA-Based Platforms. First, DRAM testing platforms (e.g., [ 55 , 41 ] ) allow DRAM characterization studies to discover and test DRAM techniques [ 5 , 6 , 7 , 60 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 , 36 ] . These platforms are not designed for system performance evaluation. Thereby, they do not model an end-to-end system and they cannot be used to understand the system-wide performance impacts of DRAM techniques. Second, FPGA-based simulators (e.g., [ 56 , 57 , 58 ] ) model and evaluate modern systems at high simulation speeds. These platforms have two drawbacks that prevent them from enabling rapid and accurate DRAM technique evaluation: (1) the simulated system cannot operate real DRAM chips because the simulation interfaces with main memory through a rigid interface and (2) modifying FPGA-based simulators requires deep hardware description language (HDL) expertise. Third, FPGA-based emulators (e.g., [ 54 , 40 , 58 , 59 ] ) model end-to-end systems and can use real DRAM chips. However, (1) modifying the memory controller of these systems to implement DRAM techniques requires deep HDL expertise and (2) the processor of the modeled system operates at a much lower clock frequency (e.g., 50\text{\,}\mathrm{MHz} to 200\text{\,}\mathrm{MHz} ) while the DRAM operates at a much higher clock frequency (e.g., 1.6\text{\,}\mathrm{GHz} to 3.2\text{\,}\mathrm{GHz}

Read the complete text