Soliton self-excitation under pulsed driving in a Kerr resonator
Matthew Macnaughtan, Zongda Li, Yiqing Xu, Xiaoming Wei, Zhongmin Yang, Stéphane Coen, Miro Erkintalo, Stuart G. Murdoch · 2025
Read Soliton self-excitation under pulsed driving in a Kerr resonator by Matthew Macnaughtan, Zongda Li, Yiqing Xu, Xiaoming Wei, Zhongmin Yang, Stéphane Coen, Miro Erkintalo, Stuart G. Murdoch (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-10307.txt.
Introduction
Matthew Macnaughtan and co-authors report a new way for light pulses in a resonator to excite themselves, in a 2025 paper. A Kerr resonator holds light that interacts with the material it passes through, and it can form a steady pulse called a cavity soliton, which makes a comb of frequencies. Exciting such a pulse is normally a fiddly task.
Under a train of driving pulses that are slightly out of sync with the cavity, the soliton becomes the only state the field inside can take. It then forms on its own, with no outside kick and no slow tuning of settings. Only two settings must sit in the right range. The claim is backed by theory curves, direct simulation, and lab observation. The method extends to bound groups of several solitons, and it promises simpler, more efficient comb sources.
Catalog record
| CREATOR | Matthew Macnaughtan, Zongda Li, Yiqing Xu, Xiaoming Wei, Zhongmin Yang, Stéphane Coen, Miro Erkintalo, Stuart G. Murdoch |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 28 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-10307
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Soliton self-excitation under pulsed driving in a Kerr resonator Matthew Macnaughtan, Zongda Li, Yiqing Xu, Xiaoming Wei, Zhongmin Yang, Stéphane Coen, Miro Erkintalo, Stuart G. Murdoch Abstract We present a novel regime of cavity soliton excitation in a Kerr resonator driven by a train of desynchronised pulses. In this regime, the soliton solution is shown to be the sole available state for the intracavity field, allowing for the automatic excitation of single solitons without the application of any external perturbations or parameter ramping. The self-excitation of cavity soliton frequency combs is validated through numerical continuation of the Lugiato-Lefever equation, direct numerical integration, and experimental observation. We show that this regime of CS self-excitation requires only the cavity detuning and pump desynchronisation parameters to be set within the correct range, thus considerably simplifying the usually complex task of deterministic cavity soliton excitation. Additionally, we show that this procedure can also be extended to allow the deterministic generation of different families of multi-soliton bound-states. We believe this research offers a promising approach to considerably simplify cavity soliton generation in both macro- and micro-scale Kerr resonators, while also offering greatly increased thermal, power, and nonlinear efficiencies intrinsic to pulsed-driven systems. I Introduction Temporal cavity solitons (CSs) are ultra-short pulses of light that can circulate indefinitely and without distortion in a coherently driven Kerr cavity. First experimentally realised in a fiber ring resonator in 2010 Leo et al. 2010 , and subsequently in optical microresonators Herr et al. 2014 , the physics of CSs have garnered considerable attention Anderson et al. 2017 ; Bao et al. 2014 ; Jang et al. 2016 ; Leo et al. 2013 ; Jang et al. 2013 . Equally importantly, numerous real-world applications leveraging the on-chip potential of CSs and their correspondence to broadband coherent frequency combs (often referred to as soliton microcombs) have been reported, further driving interest in CS development Coddington et al. 2016 ; Trocha et al. 2018 ; Pfeifle et al. 2014 ; Marchand et al. 2021 ; Liu et al. 2020 ; Xu et al. 2021a ; Xu et al. 2020 ; Fülöp et al. 2018 . Figure 1: (a) Schematic of our experimental setup. AM: amplitude modulator, PPR: pulse picker, EDFA: erbium-doped fiber amplifier, PC: polarisation controller, PBS: polarisation beam splitter, SSB: single-sideband generator, PM: phase modulator, FFP: fiber Fabry-Perot, OSA: optical spectrum analyser, PD: photodiode, PID: proportional–integral–derivative controller. (b) Average intracavity power as the cavity detuning is scanned from high- to low-values (with the insets showing representative spectra) when the peak pump power and desynchronisation are set to 2.0 W and 2.10 fs, respectively. (c) Experimental (red) and numerical (blue) spectra of the CS state formed at \Delta=2.45 , with the inset showing the corresponding simulated temporal intensity profile. (d) Pseudo-coloured plot showing the experimentally acquired intracavity field spectrum as the peak pump power P_{\text{p}} cycles between 2.0 W ( X=3.5 ) and 0 W (shown by the line plot), with normalised cavity detuning \Delta=2.45 and desynchronisation \Delta T=2.1 fs held constant. After over a decade of scientific advancements, there has been a recent push towards more practical realisations of cavity setups and designs. This effort has primarily focused on two key practicalities of soliton comb operation: improved comb characteristics, and reliable excitation techniques. Important comb characteristics include features such as spectral bandwidth, low-noise operation, and conversion efficiency. On this front, substantial progress has been made with not only octave- and near-octave spanning microcombs Anderson et al. 2020 ; Okawachi et al. 2011 ; Del’Haye et al. 2011 , but also the demonstration of ultra-low noise soliton operation at quiet points Yi et al. 2017 , and nonlinear conversion efficiencies exceeding 40% Xue et al. 2019 ; Xue et al. 2017 ; Li et al. 2024a ; Li et al. 2022 ; Helgason et al. 2023 . Significant progress has also been reported in developing new methods for CS excitation, including injection locking Shen et al. 2020 ; Wang et al. 2022 ; Lihachev et al. 2022 ; Voloshin et al. 2021 ; Weng et al. 2024 , self-starting via the photorefractive effect He et al. 2019 , active capture Yi et al. 2016 , and chirped continuous wave (CW) driving Cole et al. 2018 . However, to date, there is still a shortage of platforms offering both enhanced soliton comb characteristics (i.e. broad spectral bandwidth, high conversion and power efficiency, etc.) and reliable, robust, and automatic excitation qualities. In this Article, we investigate a novel regime of CS excitation enabled by pulsed driving, which allows for the automatic generation of single CSs without the application of any external perturbation or parameter ramping. Furthermore, due to the use of picosecond driving pulses, our experimental scheme immediately benefits from increased power and nonlinear efficiencies, thermal stability, and a tunable repetition rate locked to an external RF clock. When operating within this self-exciting regime, the formation of a stable single CS state is guaranteed by simply setting the parameters of the drive field within a specified range. This technique thus significantly simplifies the problem of achieving reliable and deterministic CS excitation. Furthermore, we demonstrate that this technique can be extended to provide deterministic, self-exciting access to a whole family of CS bound-states Wang et al. 2017 , and that it is possible to switch back and forth between these states simply by varying either the detuning or desynchronisation of the driving field. II Experimental Setup, Numerical Model, and Demonstration of Soliton Self-excitation We begin by describing our experimental setup shown in Fig. 1 (a). Our pump field [denoted as ’pump path’ in Fig. 1 (a)] is initially derived from a 1565 nm CW laser, which, after using standard electro-optic (EO) generation methods, is transformed into a train of 1.6 ps wide pulses Xu et al. 2021b ; Anderson et al. 2020 . After passing this train of pulses through a pulse picker (PPR), the repetition rate is given as f_{\text{rep}} and the pump desynchronisation (in seconds per roundtrip) can be taken to be \Delta T=f_{\text{rep}}^{-1}-\text{FSR}^{-1} (where FSR represents the cavity free spectral range). Following a polarisation beam splitter (PBS) and fiber circulator, our pump field is then passed into our fiber Fabry-Perot (FFP) cavity. The cavity is formed from two partially reflective dielectric mirrors (with transmission coefficients, \theta , of 0.6 %) butt-coupled to the two ends of a 0.29 m length (with round trip length L=0.58 m) of dispersion-shifted fiber (DSF). The corresponding cavity FSR and finesse \mathcal{F} are measured to be 350 MHz and 180, respectively. At our driving wavelength, the cavity exhibits a Kerr nonlinear coefficient of \gamma=2.6\penalty\ \text{W}^{-1}\text{km}^{-1} and second-, third-, and fourth-order dispersion coefficients of \beta_{2}=-1.23\penalty\ \text{ps}^{2}/\text{km} , \beta_{3}=0.13\penalty\ \text{ps}^{3}/\text{km} , and \beta_{4}=-5.91\times 10^{-4}\penalty\ \text{ps}^{4}/\text{km} , respectively. To stabilise the cavity detuning, we create a separate detuning control signal [denoted as ’control path’ in Fig. 1 (a)] which is generated from the same 1565 nm CW laser and passed through a single-sideband generator (SSB) (to shift the frequency of the control signal relative to the pump) and a phase modulator [necessary for Pound–Drever–Hall (PDH) locking]. By placing the detuning control signal on an orthogonal polarisation relative to our pump field (in which the two signals are combined into one