Optical force density and surface displacements in transparent dielectrics due to non-ionizing sub-picosecond laser excitation

B. Anghinoni, L. C. Malacarne, G. V. B. Lukasievicz, B. Lendl, M. L. Baesso, N. G. C. Astrath · 2025

Read Optical force density and surface displacements in transparent dielectrics due to non-ionizing sub-picosecond laser excitation by B. Anghinoni, L. C. Malacarne, G. V. B. Lukasievicz, B. Lendl, M. L. Baesso, N. G. C. Astrath (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-09964.txt.

Introduction

Anghinoni and co-authors analyze how short laser pulses push on clear materials in a 2025 paper. A sub-picosecond flash can press on a transparent dielectric without ionizing it. For pulses near a picosecond long, the momentum part of that optical force grows to match the stress part.

Simulations track the tiny surface bulges this force raises in fused silica glass. Careful settings suppress dispersive and nonlinear side effects in the model. A single hundred-femtosecond pulse still moved the surface by tens of picometers, with momentum force in charge. The team also weighs how such small shifts could be measured. Laser machining and optics both care about these hidden pushes.

Catalog record

CREATORB. Anghinoni, L. C. Malacarne, G. V. B. Lukasievicz, B. Lendl, M. L. Baesso, N. G. C. Astrath
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE48 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-09964

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Optical force density and surface displacements in transparent dielectrics due to non-ionizing sub-picosecond laser excitation B. Anghinoni, L. C. Malacarne, G. V. B. Lukasievicz, B. Lendl, M. L. Baesso, N. G. C. Astrath Abstract The optical force density acting in transparent dielectric media due to short laser excitation is theoretically analyzed. For typical laser pulses with picosecond duration, the momentum component of the optical force becomes of the same order of magnitude as the stress component, enhancing the overall optomechanical effects. Simulations of the optically-induced surface displacements in fused silica glass are also presented. With careful choice of realistic simulation parameters, dispersive and nonlinear effects were shown to be suppressed and displacements of 50 pm were found for single-pulse excitation with 100 fs duration, where the momentum component of the force is dominant. A possibility of measuring these displacements with piezo-electric detection is also discussed, providing a way to attain spatiotemporal characterization of the optical momentum force in continuum media. Such a description would significantly advance our current knowledge on the behavior of optical forces, potentially contributing to more versatile optomechanical applications, while also clarifying the ongoing Abraham-Minkowski fundamental problem on the momentum transferred by light. I Introduction Precise knowledge of the optical forces acting in matter under laser illumination is integral to modern optomechanics, finding applications, for example, in the design of photonic devices Wiederhecker et al. 2009 ; Partanen and Tulkki 2022 , waveguides Rakich et al. 2010 ; Pernice et al. 2009 ; Wang et al. 2016 , optofluidics Monat et al. 2007 ; Psaltis et al. 2006 and optical manipulation of biological systems Brevik 2023 ; Torbati et al. 2022 . From classical field theory, it is known that forces are described through a four-continuity equation associated to a stress-energy-momentum (SEM) tensor Landau and Lifshitz 1987 . In this context, forces in continuum matter originate either from stress effects or from momentum transfer and, for optical forces, the momentum transfer occurs from light to the medium. Describing such transfer, however, is far from trivial – in fact, it represents a long-standing dilemma in physics, which started more than a hundred years ago and is currently known as the Abraham-Minkowski (A-M) problem Abraham 1909 ; Minkowski 1908 . This fundamental process has proven to be very elusive, where only few experimental works were capable of assessing light’s momentum Jones and Richards 1954 ; Jones and Leslie 1978 ; Gibson et al. 1980 ; Strait et al. 2019 ; Campbell et al. 2005 . On the other hand, theoretical works are abundant and present very rich discussions with distinct formulations and interpretations for the A-M problem Brevik 1979 ; Kemp 2011 ; Pfeifer et al. 2007 ; Einstein and Laub 1908 ; Anghinoni et al. 2022 ; Anghinoni et al. 2023a ; Anghinoni et al. 2024 ; Partanen et al. 2017 ; Milonni and Boyd 2010 ; Barnett 2010 ; Corrêa and Saldanha 2020 ; Silveirinha 2017 ; Bethune-Waddell and Chau 2015 . The propagation of light in continuum material media inevitably generates stress effects, whose dynamics have been investigated in earlier literature Gordon 1973 ; Anghinoni et al. 2024 ; Astrath et al. 2024 ; Partanen et al. 2023 . Distinguishing these optically-induced stress effects from those stemming from optical momentum transfer is crucial for a correct interpretation of the light-matter interactions and the A-M problem Brevik 2018 . Indeed, attaining such distinction experimentally is a formidable task as bulk stress forces do not affect the center of mass movement of a body Brevik 1979 ; Kemp and Sheppard 2017 – nevertheless, the spatiotemporal distribution of such stress forces has been successfully addressed in transparent liquids Astrath et al. 2022 ; Astrath et al. 2023 ; Astrath et al. 2024 . The spatiotemporal distribution of the momentum part of the bulk optical force, on its turn, is typically very small in magnitude and has never been observed. However, contrary to the stress counterpart, once this momentum force distribution is integrated over the sample’s volume we obtain a contribution to the total optical force acting on the sample that, in some situations, is capable of producing measurable effects on the center of mass dynamics of the body. Such dynamics have been studied experimentally both under low-frequency Walker and Lahoz 1975 ; Rikken and van Tiggelen 2012 and optical excitations Jones and Richards 1954 ; Jones and Leslie 1978 . As discussed in detail the next section, to enhance the optical momentum transfer and render its effects more appreciable, we generally need excitations with relatively fast modulations in time. Ideally, high beam intensities should also be applied as the optical force density scales linearly with intensity. These two facts together bring about the potential necessity of a full nonlinear and dispersive description of the beam propagation, which would make the problem much more complicated and hinder any effort to isolate the optomechanical effects stemming from momentum transfer. Nevertheless, we will show that by choosing suitable sample material and geometry along with some realistic beam parameters, it is possible to have a propagating beam whose intensity is large enough to produce measurable optically-induced surface deformations on the sample while not being significantly affected by nonlinear phenomena or temporal dispersion during propagation. This behavior will greatly simplify the theoretical analysis of the deformations, from which the contribution of the optical momentum force component can be clearly characterized in space and time. This work is organized as follows. In Sec. II we theoretically describe the optical force density acting in transparent dielectric media due to the propagation of a short laser pulse. It is seen that the momentum part of the optical force acquires the same order of magnitude as the stress part for typical pulsed beams of about 1 ps duration. In Sec. III , we show that the potentially complicating dispersion and nonlinear effects can be neglected in the propagation of a 100 fs single-pulse gaussian beam with 0.5 TW/cm 2 intensity and 100 \mu m radius by choosing a fused silica glass sample with millimetric size and an appropriate optical setup. In Sec. IV we simulate the optical forces and the related surface deformations of this sample, showing that displacements of approximately 50 pm can be generated solely by the momentum part of the optical force. We also propose and discuss the possibility of measuring the aforementioned displacements by employing piezo-electric detection, aiming to characterize the optical momentum transfer in space and time. In Sec. V , an analysis of the earlier specialized literature is provided along with comparisons to our current approach. At last, conclusions are drawn in Sec. VI . II Optical force density in transparent media The conservation of momentum and energy can be described by a four-continuity equation of the form Landau and Lifshitz 1987 \partial_{\nu}\mathcal{T}^{\mu\nu}=-f^{\mu} , where \mu,\nu=0,1,2,3 , x^{\nu}=(ct,x,y,z) , \partial_{\nu}=\partial/\partial x^{\nu} , \mathcal{T}^{\mu\nu} is the SEM tensor, f^{\mu} is the four-force density and c is the speed of light in vacuum. Here, summation over repeated indices is implied. Focusing on the stress-momentum sector ( \mathcal{T}^{i\nu} with i=1,2,3 ), we obtain the momentum conservation equation as \frac{\partial\mathbf{g}}{\partial t}+\bm{\nabla}\cdot\overleftrightarrow{\mathbf{T}}=-\mathbf{f}, (1) where \mathbf{g} is the momentum density, \overleftrightarrow{\mathbf{T}} the stress tensor and \mathbf{f} the force

Read the complete text