Supershear–subshear–supershear rupture sequence during the 2025 Mandalay Earthquake in Myanmar

Shiro Hirano, Ryosuke Doke, Takuto Maeda · 2025

Read Supershear–subshear–supershear rupture sequence during the 2025 Mandalay Earthquake in Myanmar by Shiro Hirano, Ryosuke Doke, Takuto Maeda (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-09652.txt.

Introduction

Shiro Hirano, Ryosuke Doke, and Takuto Maeda studied how the ground split during a large quake in Myanmar in 2025. They used a video of the rupture, strong motion records, computer models, and images from space. The quake had a scale of 7.7 and struck near Mandalay.

Their work suggests the split first raced faster than waves in rock, then slowed, then sped up again. Images from space showed less slip in one stretch south of the start, which may explain the slowdown. Past that stretch, the split seems to have regained its fast pace. The study shows how video and space images can reveal detail that ground sensors alone may miss.

Catalog record

CREATORShiro Hirano, Ryosuke Doke, Takuto Maeda
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-09652

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Supershear–subshear–supershear rupture sequence during the 2025 Mandalay Earthquake in Myanmar Shiro Hirano, Ryosuke Doke, Takuto Maeda Abstract We investigate the rupture dynamics of the Mw 7.7 Mandalay earthquake in Myanmar on March 28, 2025. The earthquake involved a near-vertical strike-slip rupture exceeding 400 km, with shallow slip up to 6 m. A previous inversion result revealed that the rupture initially propagated at supershear velocities ( ∼ \sim 6 km/s) near the hypocenter. A unique video recording of surface rupture, captured 124 km south of the epicenter, indicates a deceleration to subshear speeds ( ∼ \sim 3 km/s) before reaching the camera location. This deceleration is supported by observed fault-normal acceleration patterns. Satellite imagery also indicated a local minimum in slip (2–3 m) around 50 km south of the epicenter, suggesting a region of reduced stress drop, which likely caused the temporary deceleration. Beyond this point, the rupture appears to have re-established supershear propagation. 1 Introduction Qualitatively and quantitatively describing coseismic surface displacement, deformation, and rupture in the immediate vicinity of a fault remains a critical challenge for both seismology and earthquake engineering. While strong motion records within a few hundred meters of the fault have been obtained from events such as the 2000 Western Tottori earthquake [ 7 ] and the 2023 Kahramanmaraş earthquake [ 15 ] , these observational opportunities are limited due to the difficulty in predicting rupture locations in advance. Such data significantly improve the spatial resolution of a strong motion distribution and play a crucial role in understanding near-fault ground motion. At 06:20 UTC on March 28, 2025, a magnitude 7.7 earthquake occurred along the Sagaing fault, which traverses Myanmar longitudinally. The epicenter was located at 22.001^{\circ} N, 95.925^{\circ} E, with a focal depth of 10 km [ 21 ] . The event involved the rupture of a near-vertical strike-slip fault spanning approximately 400 km oriented north-south. Severe damage from strong ground motion was reported in Myanmar and Thailand, with numerous instances of surface rupture especially observed in areas along the fault trace. On May 11, 2025, a video purportedly capturing coseismic surface rupture due to the mainshock was uploaded online ( https://www.facebook.com/htin.aung.33/videos/1041579804084512 ). The footage was taken approximately 124 km south of the epicenter. Based on the posted latitude and longitude information ( 20.8821^{\circ} N, 96.0353^{\circ} E), the camera, hereafter referred to as CCTV, was located within a megawatt solar power plant adjacent to the northern part of Thazi. The shadows and timestamp within the video suggested that the camera was facing south. The video displays a timestamp (in seconds) in the upper right corner, which appears to be about five minutes behind the local standard time when compared to the USGS earthquake origin time. The video begins to subtly shake around 12:46:30 at this timestamp, with shaking intensifying from 33 seconds. Between 35 seconds and 1–2 seconds later, the footage clearly shows right-lateral strike-slip displacement of the ground beyond the fence on the right side of the screen and the gate in the foreground. This recording is likely the world’s first direct observation of surface fault rupture during an earthquake, and it provides a wealth of information from a location where no seismographs were installed. An initial analysis of the video ( https://x.com/Bimaterial/status/1922157655641952512 ) revealed a pulse-like slip velocity function that completed within approximately two seconds. This result has since been refined through the analysis of numerous additional points within the video, indicating that the maximum slip velocity reached 3 m/s [ 12 ] , or 4.5 m/s considering field observations [ 8 ] . For the Myanmar earthquake, information on near-field ground motion is likely limited to the video analysis described above and the waveform data from the GEOFON station in Naypyidaw (NPW) [ 11 ] . This station is located approximately 246 km south of the epicenter and about 2.6 km west of the fault. Consequently, it is crucial to maximize the use of all available data and explore diverse avenues to understand the source behavior of this earthquake. The rupture primarily propagated southward from the hypocenter, extending over 300 km. Notably, an inversion result suggests the propagation of a supershear rupture at a speed of \sim 6 km/s around the hypocenter [ 10 ] . Furthermore, in the time-corrected fault-parallel displacement waveforms [ 11 ] , a rapid displacement at NPW, likely associated with the passage of the rupture front, began approximately 48 seconds after rupture initiation, with no clear S-wave observed prior to this. The average velocity during this interval is \frac{246}{48}=5.125 km/s. Even based solely on this record, it is strongly inferred that a significant portion of the rupture propagated at supershear velocities. Conversely, at the CCTV location, which is closer to the epicenter, the rupture might propagate at subshear rather than supershear speeds. This is supported by [ 12 ] , who note that the S-wave appears to arrive 1.8 seconds earlier than the rupture front at this site. While the video’s timestamp is inaccurate, which makes the exact arrival times of the S-wave and rupture at the camera location unknown, if a substantial portion of the rupture propagated subshear from the initiation point to the CCTV location, it would contradict the inversion results [ 10 ] . This suggests a potential change in rupture propagation velocity. In this paper, we present results estimating the history of surface strong ground motion and rupture propagation velocity using information from both the video and strong motion records. Specifically, insights from ground motion in the fault-normal direction will be used to demonstrate that while the fault rupture generally propagated at supershear speeds, it likely experienced a deceleration to subshear speeds just before reaching the CCTV location. 2 Methods & Results 2.1 Restriction of rupture front Herein, the origin time of the earthquake, 2025-03-28 06:20:54 (UTC), is defined as t=0 sec. As previously stated, the rupture arrival time at the NPW station is estimated to be t_{N}=48 sec. We define r (km) as the epicentral distance, with the CCTV location at r_{C}=124 km and the NPW station at r_{N}=246 km. Assuming a P-wave velocity of V_{P}=6.0 km/s, and given that the rupture cannot propagate faster than this velocity, the rupture front at any given location where r\leq r_{N} must arrive within the time window defined by V_{P}r\leq t\leq V_{P}r+t_{N}-V_{P}r_{N} . The lower bound of this inequality signifies that rupture cannot occur before the arrival of the P-wave radiated from the hypocenter. The upper bound accounts for the allowable delay time for the rupture to reach NPW at t=t_{N} . Next, we focus on the observation of a clear S-wave at the CCTV location. To investigate its duration, we analyzed the video footage, which has a resolution of 1920 \times 720 pixels and a frame rate of 30 fps. From each frame of the video, we extracted a 1-pixel-height horizontal line at 200 pixels from the top edge, spanning 1920 pixels in width. These extracted lines were then stacked vertically to construct a composite image (Fig. 1 ). Figure 1: A composite image by extracting a 1-pixel-height horizontal slice from the video at 200 pixels from the top edge and stacking these slices vertically. The tics and values within the image correspond to

Read the complete text