Anisotropic area measures of convex bodies
Rolf Schneider · 2025
Read Anisotropic area measures of convex bodies by Rolf Schneider (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-08803.txt.
Introduction
Schneider measured convex bodies with a directional twist in this paper from twenty twenty-five. Classic area measures weigh a surface by its outward normals. Relative geometry replaces those normals with directions set by a chosen gauge body. Schneider builds area measures under that anisotropic rule, alongside matching curvature measures.
Both fit inside a broader family he calls anisotropic support measures. The main theorem pins down when one measure mirrors another. If an anisotropic area measure of some order matches the top area measure up to scale, the body must be a tangential body of the gauge. Such bodies touch the gauge along prescribed faces. The result extends a classical characterization into the relative setting.
Catalog record
| CREATOR | Rolf Schneider |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-08803
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Anisotropic area measures of convex bodies Rolf Schneider Abstract Motivated by the relative differential geometry, where the Euclidean normal vector of hypersurfaces is generalized by a relative normalization, we introduce anisotropic area measures of convex bodies, constructed with respect to a gauge body. Together with the anisotropic curvature measures, they are special cases of the newly introduced anisotropic support measures. We show that a convex body in ℝ n {\mathbb{R}}^{n} , for which the anisotropic area measure of some order k ∈ { 0 , … , n − 2 } k\in\{0,\dots,n-2\} is proportional to the area measure of order n − 1 n-1 , must be a k k -tangential body of the gauge body. Keywords: anisotropic support measure, relative differential geometry, area measure, tangential body 2020 Mathematics Subject Classification: 52A20 53C42 53B25 1 Introduction It is a classical result of global differential geometry that a compact hypersurface (sufficiently smooth and without boundary), which is embedded in Euclidean space {\mathbb{R}}^{n} and on which some elementary symmetric function of the principal curvatures is constant, must be a sphere. While versions for convex hypersurfaces go back to Liebmann [ 10 ] and Süss [ 22 ] , contributions with increasing generality are due to Hsiung [ 8 ] , Aleksandrov [ 1 ] , Reilly [ 13 ] , until the full result was proved by Ros [ 14 ] ; a new proof was given by Montiel and Ros [ 11 ] . The restriction to convex hypersurfaces has the advantage that one can prove a corresponding results without differentiability assumptions. For a convex body K (a compact convex set with interior points) in {\mathbb{R}}^{n} one can define curvature measures C_{k}(K,\cdot) , k=0,\dots,n-1 , (see [ 20 , Sect. 4.2] ) that depend weakly continuously on K and satisfy C_{k}(K,\beta)=\int_{\beta}H_{n-1-k}\,{\rm d}\mathcal{H}^{n-1} for Borel sets \beta in the boundary of K , if the latter is of class C^{2} . Here H_{m} is the m -th normalized elementary symmetric function of the principal curvatures and \mathcal{H}^{n-1} is the (n-1) -dimensional Hausdorff measure. Since C_{n-1}(K,\beta)=\mathcal{H}^{n-1}(\beta) for \beta as above, the assumption that H_{n-1-k} is constant can be generalized to the assumption C_{k}(K,\cdot)=cC_{n-1}(K,\cdot) (1) with some constant c , where k\in\{0,\dots,n-2\} . Under this assumption, it was proved in [ 19 ] that K must be a ball. More generally, Kohlmann [ 9 ] showed (with a very different proof) that K must be a ball if \sum_{r=0}^{n-2}\lambda_{r}C_{r}(K,\cdot)=C_{n-1}(K,\cdot) with \lambda_{0},\dots,\lambda_{n-2}\geq 0 . If K is a convex body of class C^{2}_{+} , then the principal curvatures k_{1},\dots,k_{n-1} of its boundary are all positive, and one can define the principal radii r_{1},\dots,r_{n-1} by r_{i}=1/k_{i} . Let s_{k} be the k -th normalized elementary symmetric function of the principal radii, considered as a function of the outer unit normal vector. Similar to the curvature measures, one can define area measures S_{k}(K,\cdot) , k=0,\dots,n-1 , (see [ 20 , Sect. 4.2] ) that depend weakly continuously on K and satisfy S_{k}(K,\omega)=\int_{\omega}s_{k}\,{\rm d}\mathcal{H}^{n-1} for Borel sets \omega in the unit sphere {\mathbb{S}}^{n-1} of {\mathbb{R}}^{n} , if K is of class C^{2}_{+} . Under sufficient differentiability assumptions, the condition H_{n-1-k}=c is equivalent to s_{k}=cs_{n-1} , which without differentiability assumptions can be replaced by S_{k}(K,\cdot)=cS_{n-1}(K,\cdot). (2) Interestingly, in contrast to ( 1 ), the equation ( 2 ) does not characterize balls. It was proved in [ 18 ] that ( 2 ) holds if and only if K is a k -tangential body of a ball. The latter means that K contains a ball B and that every supporting hyperplane of K that does not support B contains only (k-1) -singular points of K (see [ 20 , Thm. 2.2.10] ), that is, points at which there exist n-k+1 linearly independent normal vectors. For example, the convex hull of B and a point outside is a 1 -tangential body of B . In relative differential geometry, the unit normal vector of a hypersurface is replaced by a ‘relative normalization’, in such a way that the gauge hypersurface representing the relative normal and the original hypersurface have parallel tangent hyperplanes at corresponding points. The relative normal is then used to define relative curvatures and to carry over other constructions of classical differential geometry. For introductions to relative differential geometry, with references to the early history, we refer to Bonnesen and Fenchel [ 4 , Sect. 38] and P.A. and A.P. Schirokow [ 16 , Sect. VIII] . Presentations of basic aspects, preparing different applications, are also given by Simon [ 21 , §1] and Schneider [ 17 , Sect. 2] , and in a different style by Scheuer and Zhang [ 15 , Sect. 2] . It seems that a revival of relative differential geometry began with Reilly [ 12 ] . In the introduction, the author wrote: “The primary objective of this paper is to interpret certain theorems from the theory of nonlinear partial differential equations in terms of the relative differential geometry of nonparametric hypersurfaces.” The theorem on closed hypersurfaces with a constant curvature function was extended to relative curvatures by He, Li, Ma and Ge [ 7 ] . More contributions, emphasizing the anisotropic character, are due to He and Li [ 6 ] , Xia [ 23 ] , Scheuer and Zhang [ 15 ] . Anisotropic curvature measures of convex bodies were introduced, and the result of Kohlmann mentioned above was extended to this setting, by Andrews, Lei, Wei and Xiong [ 2 ] . As a counterpart, the purpose of the following is to introduce anisotropic area measures, depending on a gauge body E , and to characterize the tangential bodies of E , thus generalizing the result of [ 18 ] . We formulate our result in the next section, after a few preliminaries. 2 Anisotropic support measures We work in {\mathbb{R}}^{n} ( n\geq 2 ), with scalar product \langle\cdot\,,\cdot\rangle and norm \|\cdot\| , unit sphere {\mathbb{S}}^{n-1} and unit ball B^{n} (with centers at the origin o ). For subsets of {\mathbb{R}}^{n} , we denote by {\rm int} the interior and by {\rm bd} the boundary. Let \mathcal{B}(T) be the \sigma -algebra of Borel sets of a topological space T . Anisotropic area measures are easily introduced if one is familiar with mixed area measures of convex bodies, as we will assume; we refer to [ 20 , Sect. 5.1] . By {\mathcal{K}}^{n} we denote the set of convex bodies in {\mathbb{R}}^{n} . The mixed area measure of K_{1},\dots,K_{n-1}\in{\mathcal{K}}^{n} is denoted by S(K_{1},\dots,K_{n-1},\cdot) , It is a finite Borel measure on the unit sphere {\mathbb{S}}^{n-1} , and is connected to the mixed volume V(K_{1},\dots,K_{n}) of K_{1},\dots,K_{n}\in{\mathcal{K}}^{n} by V(K_{1},\dots,K_{n})=\frac{1}{n}\int_{{\mathbb{S}}^{n-1}}h_{K_{1}}(u)\,S(K_{2},\dots,K_{n},{\rm d}u), (3) where h_{K}(u)=\max\{\langle x,u\rangle:x\in K\}\quad\mbox{for }u\in{\mathbb{S}}^{n-1} defines the support function of K (here only needed on {\mathbb{S}}^{n-1} ). The principal idea of relative differential geometry is to replace the unit ball B^{n} by a general gauge body E , and we do the same for general convex bodies. Let E\in{\mathcal{K}}^{n} be given, with the property that o\in{\rm int}\,E . In the following, E is fixed and will, therefore, often not be mentioned. In this section, we assume only that E is regular and strictly convex. Therefore, at any boundary point x of E