Diffusive spreading of a polydisperse polymer solution in a channel

H. Y. Wang, G. W. Slater · 2025

Read Diffusive spreading of a polydisperse polymer solution in a channel by H. Y. Wang, G. W. Slater (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-08323.txt.

Introduction

Hanyang Wang and Gary Slater study in 2025 how cut DNA fragments spread out inside a narrow channel. Long DNA can be mapped by cutting it with enzymes while it sits in such a channel. Once cut, the pieces drift apart by random motion and by crowding effects, until a device can tell them apart and guess their size.

The team used random sim methods to time that spread for pieces of unlike size, each with its own drift rate. The spread time counts as a first-passage time: the wait till the pieces reach a set final spread. Chance in the drift proved as strong a factor as the size mix itself. They define a randomness score for the order of pieces that tracks the final spread time in a straight line. Spread times follow a known first-passage shape.

Catalog record

CREATORH. Y. Wang, G. W. Slater
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE43 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-08323

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Diffusive spreading of a polydisperse polymer solution in a channel Preprint: APS/123-QED H. Y. Wang, G. W. Slater Abstract Long DNA molecules can be mapped by cutting them with restriction enzymes inside a narrow channel. Once cut, the individual fragments thus produced move away from each other due to diffusion and entropic effects. We investigate how long it takes for these fragments to travel distances large enough for an experimental device to distinguish them and (possibly) estimate their size. In essence, this is a single-file diffusion process in which molecules of different sizes and hence different diffusion coefficients spread out from an initially dense configuration. We use Monte Carlo methods to investigate this class of problems and define the time taken to reach the required final state as a first-passage spreading time . Our results demonstrate that the stochastic nature of the diffusion process is as significant as the specifics of the molecular size distribution in determining the spreading time. We examine the relationship between the spreading time and the final space occupied by the fragments as a function of the experimental parameters and determine the fundamental length scale governing this process. We introduce a molecular sequence randomness parameter, Z Z , which is linearly correlated with the final spreading time. Finally, we show that the distribution function of spreading times follows a well-known form for first-passage time problems, and that its variance decreases linearly with the number of fragments. I Introduction Nanofluidic channels are becoming very powerful instruments in laboratories Karolin et al. 2022 , especially for studying and analyzing DNA molecules. For example, Schwartz et al. Schwartz et al. 1993 ; Schwartz et al. 1995 introduced the idea of using nanochannels to map long DNA molecules Reisner et al. 2010 ; Erik et al. 2021 . Since then, the methodologies used for DNA imaging and data analysis, as well as the implementation of mapping techniques, have advanced Gruszka et al. 2021 ; Friedrich et al. 2016 . This approach to DNA mapping typically involves extending a long DNA chain within a narrow channel, cutting it using restriction enzymes Marzia et al. 2025 ; Schwartz et al. 1993 , and imaging the distribution and order of the resulting fragments in the channel Meng et al. 2005 . Restriction enzymes target short, specific DNA sequences and cut the DNA chain into smaller fragments in a very precise and reproducible way Uppuluri et al. 2021 ; McCaffrey et al. 2015 . Because the cutting process is performed within a narrow channel, the order of the restriction fragments is maintained (fragments cannot change position due to excluded volume interactions), allowing molecular mapping once the fragments can be imaged. The objective of this study is to explore a particular dimension of this problem. Specifically, we are interested in investigating the dynamics of a linear polymer chain confined within a channel after it has been cut into several fragments. The fundamental question we seek to address is the time required for these fragments to become visibly separated from each other to a degree that allows for their unambiguous detection. This process is influenced by two key factors: entropic repulsion and diffusion. We will focus on understanding the parameters that control the necessary separation time; in doing so, we will use parameters that roughly match the conditions used for DNA mapping in channels (e.g. N=5-20 fragments) while also investigating the (admittedly more theoretical) asymptotic limits (e.g., N\gg 1 ). Of course, the size and order of the molecular fragments are also important factors; for example, very large fragments can block the diffusion process of smaller ones if located near the ends of a sequence of fragments. The paper is organized as follows. In Section II , we describe our Monte Carlo model and the necessary parameters for analyzing simulation data. Section III presents our results in several subsections covering the following topics: the properties of monodisperse systems; a study of some simplified bimodal systems; a comparison between random and monodisperse systems, leading to the introduction of a parameter Z to characterize the molecular arrangement; the role of permutations in random systems; and finally, a look at extreme situations and distribution functions of spreading times. Our conclusions, including possible future extensions of these results, are found in Section IV . II The Lattice Monte Carlo Model The top part of Fig. 1 shows a molecular view of the system. A long polymer chain of mass M is cut into N pieces at time t=0 , after which the pieces start to move away from each other. The diameter of the channel, h , is smaller than the free-solution radius of gyration R_{g} of all the pieces; as a result, the molecular fragments form blobs of diameter h that are aligned along the channel axis. We denote by \tilde{X} the minimum gap size that can be detected between two adjacent fragments; in other words, the distance between two fragments must be \geq\tilde{X} so that we can confirm the presence of two fragments instead of a single, longer one. For example, this minimum gap may have to be of order h (e.g., the X_{2} gap in Fig. 1 ). Figure 1: Diagram of the molecular model and its mapping onto the simulated system. Top panel: A long polymer chain inside a narrow tube of diameter h was cut into 4 fragments. The fragments form blobs of size h aligned along the tube axis. Middle panel: The system is then mapped onto a one-dimensional Monte Carlo model with rigid objects. Bottom panel: The i^{th} object comprises m_{i}\geq 1 lattice cells of size \sigma=1 . The target state is reached when all gaps X_{i} are simultaneously larger than a threshold value \tilde{X} for the first time. We map this molecular system onto a one-dimensional Lattice Monte Carlo model, also shown in Fig. 1 . The lattice cell size, \sigma=1 , is smaller than both h and the smallest gap, \tilde{X} . The system thus consists of N rigid molecules diffusing in the single-file diffusion (SFD) regime; the fluctuations in the axial length of the molecules are neglected. Because hydrodynamic interactions are screened between blobs Brochard and de Gennes 1977 ; Daoud and Gennes 1977 , we use a Rouse model for the polymer chains; the diffusion coefficient of molecule i is then D(m_{i})=D_{1}/m_{i} , where m_{i}\geq h refers to its size ( i.e. , number of lattice cells occupied). The total molecular size is thus M=\sum_{i=1}^{N}m_{i} . We use the optimized Monte Carlo moves described in ref. Chubynsky and Slater 2012 . We denote by X_{i}~(i=1..N-1) the spacing or gap between molecules i and i+1 . At time t=0 , the molecules are equally spaced by a single lattice cell: X_{i}(0)=1,~\forall~i . We simulate the evolution of this system until all gaps are simultaneously greater than a certain target value \tilde{X} for the first time , X_{i}(t=\tau_{\mathsf{\,f}})\geq\tilde{X}~~~~~~~~~\forall~i~, (1) which defines the spreading time \tau_{\mathsf{\,f}} . Our main goal is to understand how the mean first passage time \tau_{\mathsf{\,f}} depends on the total molecular size M , the number of molecular fragments, N , the minimum final gap size, \tilde{X} , and especially the details of the distribution of molecular sizes,

Read the complete text