Dimerization of Ag adatoms on Si(100) at surprisingly low temperature due to adatom migration on top of Si-dimer rows
Alejandro Peña-Torres, Michail Stamatakis, Hannes Jónsson · 2025
Read Dimerization of Ag adatoms on Si(100) at surprisingly low temperature due to adatom migration on top of Si-dimer rows by Alejandro Peña-Torres, Michail Stamatakis, Hannes Jónsson (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-08207.txt.
Introduction
Alejandro Peña-Torres, Michail Stamatakis, and Hannes Jónsson explain why silver atoms pair up on a silicon surface even when deposited in deep cold, in a paper published in two thousand twenty-five. Experiments had seen silver dimers form on the Si(100) surface at temperatures as low as one hundred forty kelvin, which seemed far too cold for atoms to wander.
The surface is corrugated into rows of silicon dimers. The authors simulate deposition with classical dynamics, hunt down the energy saddles between sites, and run kinetic Monte Carlo over long times. Silver atoms, they find, glide easily along the tops of the silicon dimer rows. Once an atom drops into a snug site between rows, it stops moving. The rival idea, that landing energy briefly melts a hot spot and boosts motion, contributes little. Easy row-top migration plus sticky valleys explains the low-temperature pairing.
Catalog record
| CREATOR | Alejandro Peña-Torres, Michail Stamatakis, Hannes Jónsson |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 28 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-08207
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Dimerization of Ag adatoms on Si(100) at surprisingly low temperature due to adatom migration on top of Si-dimer rows Alejandro Peña-Torres, Michail Stamatakis, Hannes Jónsson Abstract The puzzling experimental observations of Ag addimer formation on the Si(100) surface upon vapor deposition at low temperature, even as low as 140 K, reported by Huang et al. [Phys. Chem. Chem. Phys. 2021, 23, 4161], is explained by facile thermal migration on top of the Si dimer rows, while diffusion is inactive once an Ag adatom lands in one of the optimal binding sites in between dimer rows. The previously hypothesized transient mobility due to the hot spot formed as an Ag atom lands on the Si surface is found not to contribute significantly to mobility and dimer formation. The experimental conditions are simulated by a combination of classical dynamics calculations of the deposition events, systematic searches of saddle points representing transition states for thermally activated events and kinetic Monte Carlo simulations of long timescale evolution of the system over a temperature range from 100 K to 300 K. While the calculated energy barriers for diffusion parallel and perpendicular to the Si dimer rows are found to be nearly equal, indicating isotropic diffusion, the simulations show highly anisotropic diffusion, as the optimal migration mechanism involves multiple hops of Ag adatoms on top of Si dimer rows. Impinging Ag atoms are found to have a 90% chance of landing on top of a dimer row and while the hot spot created cools down too fast for transient mobility to play an important role, the energy barrier for thermally activated hops along the dimer row is low enough for migration to be active even at 100 K. A migrating Ag adatom can dimerise with another Ag adatom sitting at a stable binding site in between rows or another adatom on top of the same row. The simulations for deposition at 140 K show that most of the deposited Ag atoms end up forming dimers. † † affiliation: Science Institute and Faculty of Physical Sciences, U. of Iceland, 107 Reykjavík, Iceland † † affiliation: Departmentof Chemistry, Inorganic Chemistry Lab, University of Oxford, Oxford OX1 3QR, U.K. † † affiliation: Science Institute and Faculty of Physical Sciences, U. of Iceland, 107 Reykjavík, Iceland † † email: [email protected] Metallic thin films and nanostructures on semiconductor surfaces are of great importance for various devices, with silicon substrates receiving particular attention due to their prominence in electronics. Silver deposited on Si(100) surfaces has become one of the most frequently studied metal/semiconductor systems and a great deal of work has been done to study nanostructure formation and overlayer growth. Various experimental techniques have been applied to this system such as coaxial impact collision ion scattering spectroscopy Kim et al. 1998 ; Cho et al. 1999 , photoemission spectroscopy Matsuda et al. 1999 ; Matsuda et al. 2001 , scanning tunneling microscopy (STM) Hashizume et al. 1990 ; Winau et al. 1994 ; Kocan et al. 2006 ; Takeuchi et al. 2011 and micro-calorimetry Starr et al. 2001 . There has been ongoing discussion about the diffusion mechanism of Ag adatoms and Ag aggregates formation on the dimer row reconstructed Si(100) surface. Huang et al. attributed the experimental observation of Ag agreggates at low temperatures to hot-atom motion upon initial collision of single Ag atoms on the Si surface, indicating that thermal diffusion is negligible at such low values of temperature. Huang et al. 2021 However, there has been no further experimental or theoretical evidence to support this claim. Regarding the single Ag atom diffusion, early work by Zhou et al. Zhou et al. 1993 concluded that the migration is anisotropic with diffusion favored perpendicular to the dimer rows and with an activation energy of only 0.11 eV. On the other hand, Okon et al. Okon and Joachim 1997 reported preferred migration parallel to the dimer rows. More recently, extensive studies combining cryogenic STM experiments and density functional theory (DFT) calculations have been carried out Huang et al. 2018 ; Huxter et al. 2019 ; Huang et al. 2021 ; Huang et al. 2022 . From the calculated energy landscape, Huang et al. Huang et al. 2022 conclude that the adatom diffusion is isotropic on the c(4 \times 2) reconstructed surface with an energy barrier of 0.51 eV. This agrees with earlier theoretical calculations by Kong et al. jeong Kong et al. 2003 , who also reported an isotropic barrier of 0.5 eV for the adatom migration on the p(2 \times 2) reconstructed the Si(100) surface. Here, we present theoretical calculations for the deposition, diffusion and possible dimerization of Ag atoms on the dimer row reconstructed Si(100) surface. Molecular dynamics simulations of a single Ag atom deposition on the Si surface using a Tersoff-type potential parametrized for the Ag/Si interaction Butler et al. 2011 show that the preferred landing sites lie on top of the Si dimer rows. And that the energy of the deposited atom is dissipated after 1-2 ps, making transient mobility upon initial impingement unlikely at low temperatures. To study the long time scale dynamics of a single Ag adatom diffusing on the Si(100) surface at low temperatures, we use the adaptive kinetic Monte Carlo (AKMC) method. Our simulations performed at 140 K show that the adatom performs around 60 hops between binding sites on top of the dimer rows before falling down to the optimal binding site in between the dimer rows. To corroborate our results, we use the nudge elastic band (NEB) method to calculate the migration paths with atomic forces from density functional theory (DFT) calculations within the PBEsol functional approximation, and subsequent kinetic Monte Carlo (KMC) simulations of the diffusion over a temperature range from 100 K to 300 K, we find that the diffusion is anisotropic with faster diffusion parallel to the dimer rows. While the energy barrier obtained from the energy landscape indeed indicates isotropic diffusion, the anisotropy results from fast migration along the top of a dimer row in between visits to optimal binding sites in between dimer rows. From the temperature dependence of the diffusion coefficient obtained from the KMC simulation, an effective activation energy for parallel diffusion is 20% lower than what would be expected from the highest energy barrier that needs to be overcome. Additionally, we present KMC simulations at 140 K where Ag dimers can form when two adatoms meet during diffusion. The preferred migration on top of the dimer rows turns out to play a key role in the fast formation of Ag addimers. These results can help explain why single Ag adatoms are not observed in STM experiments, even at low temperature where thermal migration is expected to be inactive. Figure 1: Top view of the clean Si(100) displaying a c(4 \times 2) rearrangement. The buckled dimers are highlighted with a brown (orange) color for the upper (lower) Si atoms. The binding sites found for the Ag adatom, in between dimer rows (B, B d ) and on top of dimer rows (T, T 2 , T 3 , T u and T d ) are marked on the surface. To assess the initial impingement and preferred landing sites of the Ag atoms on the Si