Interface Fragmentation via Horizontal Vibration: A Pathway to Scalable Monodisperse Emulsification
Linfeng Piao, Anne Juel · 2025
Read Interface Fragmentation via Horizontal Vibration: A Pathway to Scalable Monodisperse Emulsification by Linfeng Piao, Anne Juel (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-07742.txt.
Introduction
Linfeng Piao and Anne Juel shake two stacked liquids sideways to make uniform droplets at scale, in a 2025 fluids paper. Even-sized droplets matter for medicines, foods, and lab tests, but making them in bulk without costly chips is hard. Their setup is simple: a rectangular box holding two liquids that do not mix, vibrated horizontally.
When thick, syrupy forces rule, a single ordered line of standing waves rises along each end wall. Push the shaking past a threshold and the wave tips snap off into a neat row of droplets. The team gives the scaling law for that threshold and shows drop size tunes easily with shaking strength and rate. Output per cycle grows with box width, a clear path to scale.
Catalog record
| CREATOR | Linfeng Piao, Anne Juel |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-07742
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Interface Fragmentation via Horizontal Vibration: A Pathway to Scalable Monodisperse Emulsification Linfeng Piao, Anne Juel Abstract We present a scalable method for producing monodisperse microscale emulsions in a container holding two stably stratified layers of immiscible liquids by applying horizontal vibration. Our experiments and theoretical modelling show that the critical non-dimensional acceleration for regular droplet formation is governed by a shear-dominated breakup mechanism, which scales as N − 1 / 2 ω ∗ 3 / 2 N^{-1/2}\omega^{*3/2} , where N N is the viscosity ratio and ω ∗ \omega^{*} is the frequency of forcing on the viscous-capillary scale. The droplet diameter can be easily controlled by varying the forcing parameters, thus demonstrating this vibrational configuration as a scalable alternative to microfluidics. Emulsification, a powerful technique for dispersing a liquid in a second immiscible phase, underpins a wide range of practical applications from food processing McClements 2004 and drug delivery systems Washington 1996 ; Ho et al. 2022 to solvent extraction Ahmad et al. 2011 . Although the processes used in these applications are different, they typically demand precise control of the emulsion properties. For example, droplet size and production rate are key determinants of the mass transfer rate of the solvent to be extracted using emulsion-liquid-membrane technology in wastewater treatment Kumar and Panesar 2019 . However, controlling emulsification at application scale remains a significant technical challenge. The fundamental route to droplet formation is through the fragmentation of a liquid interface subject to shear or impact stresses Villermaux 2007 ; Barrero and Loscertales 2007 . Primary instabilities give rise to corrugated liquid threads or ligaments, whose breakup in turn determines the drop-size distribution. Polydispersity stems principally from the dynamics and fragmentation of these ligaments, including phenomena such as ligament-turbulence interactions, satellite drop ejection, and subsequent coalescence events—all of which are difficult to control due to their sensitivity to local flow conditions and interfacial instabilities. Rotor stators and homogenisers provide “top-down” high-energy methods of emulsification Håkansson 2019 , where fluctuations in local shear stress across the system result in compositional heterogeneity Anna et al. 2003 ; Evangelio et al. 2016 . These methods suit large-scale production but offer little control over individual droplet formation, resulting in a broad size distribution of the dispersed phase. To improve control over droplet size and size variation, controlled-shear emulsification techniques, such as membrane emulsification Meyer and Crocker 2009 and microfluidic methods Link et al. 2004 have gained momentum over the past two decades Shah et al. 2008 . The latter provides a “bottom-up” approach to emulsification via the production of droplets of tuneable size from controlled interface break-up in confined flow geometries, e.g., Y or T-junctions, co-flowing, flow-focusing or cross-flow configurations Garstecki et al. 2006 ; De Menech et al. 2008 ; Shah et al. 2008 ; Anna 2016 ; Fryd and Mason 2012 ; Chen et al. 2023 , as well as in ”chip-free” microfluidic systems Visser et al. 2018 ; Su et al. 2025 . Furthermore, tuneable interfacial tension has recently been used to reconfigure complex emulsions dynamically Zarzar et al. 2015 . However, although microfluidic devices can achieve upscaled production of monodisperse emulsion through parallelization Shah et al. 2008 , they rarely provide a viable option for practical applications because of their high cost of installation and maintenance Quintero et al. 2018 . Figure 1: (a) Schematic diagram of the experimental set-up. The blue rectangle shows a close-up snapshot of subharmonic waves localised near the right end wall captured in angled top-view. The pink arrow indicates subharmonic wave tips and the orange arrow points to the edge of the subharmonic waves below the onset of droplet formation, which occurs at the threshold amplitude A_{c} . (b) Top-view image of the formation of regular droplet trains at the end wall (see Movie 1 in Supplemental Materials SM ). (c) Different vibrational parameters generate droplets of different size, visualized from in angled top-view (end wall indicated by yellow line). In this letter, we propose an alternative scalable method for the production of monodisperse droplets with tuneable size, by harnessing an interfacial instability that arises near the end walls of a horizontally vibrated vessel containing two layers of immiscible liquids. Horizontal vibration differentially accelerates two superposed, immiscible fluid layers confined by end walls into a counterflow Talib et al. 2007 ; Jalikop and Juel 2009 , thus providing an alternative strategy for controlling shear in the context of interface fragmentation. An advantage of this method is that we can generate on-demand stabilizer-free emulsions through external forcing, which are sustained under vibration but rapidly return to separated phases upon interruption of the forcing. Alternatively, the emulsion may be stabilized by introducing surfactants Anna et al. 2003 ; Link et al. 2004 for use after vibration cessation. We establish universal scalings for the vibrational parameters required for onset of droplets and identify a regime for monodisperse droplet formation and associated scalings to predict droplet size. We performed experiments in a sealed rectangular Perspex container with inner dimensions of 170\times 75\times 40\,\mathrm{mm}^{3} containing two stably stratified, immiscible liquids of equal volume; see Fig. 1 (a). For the upper layer, we used four grades of silicone oils (polydimethylsiloxane fluid, 10 cS, 20 cS, 50 cS, 100 cS, Basildon Chemicals Ltd) and for the lower layer, two perfluorinated polyethers (Galden ® HT135 and HT270, Solvay), with respective densities, \rho_{\mathrm{u}} , \rho_{\mathrm{l}} , and viscosities, \nu_{\mathrm{u}} , \nu_{\mathrm{l}} listed in 1 1 1 Density and viscosity (\rho_{\mathrm{u}},\nu_{\mathrm{u}}) of silicone oils 10cS ( 935\,\mathrm{kg/m^{3}},\,10.3\times\mathrm{10^{-6}}\,\mathrm{m^{2}/s} ), 20cS ( 950\,\mathrm{kg/m^{3}},\,21.7\times\,\mathrm{10^{-6}}\,\mathrm{m^{2}/s} ), 50cS ( 961\,\mathrm{kg/m^{3}},\,54.8\times\mathrm{10^{-6}}\,\mathrm{m^{2}/s} ), 100cS ( 961\,\mathrm{kg/m^{3}},\,113.7\times\mathrm{10^{-6}}\,\mathrm{m^{2}/s} ), and (\rho_{\mathrm{l}},\nu_{\mathrm{l}}) for HT135 ( 1752\,\mathrm{kg/m^{3}},\,1.12\times\mathrm{10^{-6}}\,\mathrm{m^{2}/s} ) and HT270 ( 1856\,\mathrm{kg/m^{3}},\,11.7\times\mathrm{10^{-6}}\,\mathrm{m^{2}/s} ) . In this letter, we show that monodisperse droplet formation is governed by the viscosity ratio N=\nu_{\mathrm{u}}/\nu_{\mathrm{l}} , and thus we will use this parameter to identify the fluid pairs. The container was subject to horizontal harmonic oscillations imposed with a horizontal vibration system, with a prescribed velocity A\omega\cos(\omega t) , where the amplitude, A , and the angular frequency, \omega=2\pi F , varied in the ranges A\leq 3.50 mm and 20\,\mathrm{Hz}\leq F\leq 60\,\mathrm{Hz} (see End Matter for technical specifications) . We imaged the interface dynamics in the near-endwall region (orange rectangle in Fig. 1 (a)) with a high-speed camera (Photron FASTCAM mini AX100) and a CMOS camera (Teledyne DALSA Inc, Genie HC1400). The Photron camera was used to capture time-resolved images in top view and angled top view (Fig. 1 (a)), with respective resolutions of 15.1 and 48.8 pixels/mm and a minimum rate of 4000 frames per second (fps). The droplet formation was monitored by recording top-view movies at 10 fps with the Dalsa Genie camera with a maximum resolution of 75.4 pixels/mm. The interface was visible due to the difference in refractive indices between the two liquid layers. We extracted the wavenumber k=2\pi/\lambda of the interfacial instability, where \lambda is the wavelength of the periodic interface deformation, and the diameter of the droplet D from raw images using image processing, see End Matter for details . Figure 2: (a-c) Experimental snapshots of three distinguished types of interfacial breakups: (a) breakup Ia in N =9.2, (b) breakup Ib and (c) breakup II, both in N =48.9. Red and blue boxes in (c) highlight