On gauge transforms of autonomous ordinary differential equations

Giuseppe Gaeta · 2025

Read On gauge transforms of autonomous ordinary differential equations by Giuseppe Gaeta (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-07189.txt.

Introduction

Giuseppe Gaeta and Sebastian Walcher read gauge shifts of self run change laws from a pure maths seat, in a 2025 note. Gauge shifts hail from field work in physics labs. Their traits in plain change law maths had scant pure reads till this note.

Set gauge kinds for first grade self run laws get the close read. Which non self laws are gauge kin of self run ones is the core ask. Traits that mark that kin tie fall out of the read in turn. The note sorts those marks for law staff to test by hand. Field born tools thus gain a maths home tale.

Catalog record

CREATORGiuseppe Gaeta
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-07189

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

On gauge transforms of autonomous ordinary differential equations Giuseppe Gaeta Abstract The notion of gauge transform has its origin in Physics (Field Theory). In the present note we discuss – from a purely mathematical perspective – special gauge transforms of autonomous first order ODE’s and their special properties. Particular attention is given to the problem of identifying those nonautonomous ODE’s which are gauge transforms of autonomous systems. MSC (2020): 34A99, 34A25, 34A05 Key words: nonautonomous ODEs, normalization, symmetries, transformations 1 Introduction and basics Let an autonomous ODE \dot{x}=f(x) (1) be given on some open set in \mathbb{R}^{n} , with analytic 1 1 1 Basic notions and some results extend to sufficiently differentiable systems. Analyticity is required for the identification problem (Section 4). right hand side. As usual, the dot symbolizes the derivative with respect to t . Moreover we consider a curve in GL(n,\mathbb{R}) , i.e. an analytic (or sufficiently differentiable) map \mathbb{R}\to GL(n,\mathbb{R}) , t\mapsto A(t) , with A(t_{0})=A_{0} . For the sake of simplicity (and with no loss of generality) we will take t_{0}=0 in the following. Definition 1 . (a) The nonautonomous equation \dot{y}=f^{*}(t,y):=\dot{A}A^{-1}y+Af(A^{-1}y) (2) will be called the gauge transform of ( 1 ) by A(t) . (b) Generally a nonautonomous equation \dot{x}=q(t,x) will be called a gauge transform whenever there exist an autonomous equation \dot{x}=f(x) and a curve A(t) in GL(n,\mathbb{R}) such that q=f^{*} . We note some elementary properties. Remark 1 . As to the relation between solutions of ( 1 ) and of ( 2 ), first recall \frac{d}{dt}\left(A^{-1}(t)\right)=-A^{-1}(t)\dot{A}(t)A^{-1}(t). Now, if z(t) solves ( 1 ), look at the transformed solution w(t)=A(t)z(t). A straightforward calculation yields \begin{array}[]{rcl}\dot{w}&=&\dot{A}z+A\dot{z}=\dot{A}z+Af(z)\\ &=&\dot{A}A^{-1}w+A\left(f(A^{-1}w)\right).\end{array} So, w(t) solves ( 2 ). Remark 2 . In Mechanics, one is interested in second order equations: Given \ddot{x}=h(x,\dot{x});\qquad\text{equivalently }\begin{pmatrix}\dot{x}\\ \dot{y}\end{pmatrix}=\begin{pmatrix}y\\ h(x,y)\end{pmatrix}, consider a solution z(t) , thus \ddot{z}(t)=h(z(t),\dot{z}(t)) . With A(t) as above, and w(t)=A(t)z(t) , we find \dot{w}(t)=\dot{A}(t(z(t)+A(t)\dot{z}(t) , thus we arrive at \begin{pmatrix}w(t)\\ \dot{w}(t)\end{pmatrix}=\begin{pmatrix}A(t)&0\\ \dot{A}(t)&A(t)\end{pmatrix}\begin{pmatrix}z(t)\\ \dot{z}(t)\end{pmatrix}, which brings us back to the situation of Definition 1 . 2 Motivations 2.1 Motivation and examples from Physics • Gauge theories are a cornerstone of modern Physics. Gauge transformations were first considering in the context of the Electro-Magnetic field, both classical and quantum [ 12 , 13 ] , and their use – or the requirement of gauge invariance and the study of spontaneous gauge symmetry breaking – became an essential tool in general Field Theory (defined by a variational principle), in particular once the extension to non-Abelian group was understood [ 20 ] . See e.g. the textbook [ 4 ] for a physicists’ perspective, or [ 3 ] for a mathematical approach. • A direct obvious motivation comes from Classical Mechanics: If we consider a change of reference frame (e.g. passing from a Newtonian frame to one with the same origin but rotating w.r.t. this, maybe with a non-constant angular speed) we are indeed led to consider a gauge transformation [ 5 , 8 ] ; more generally, our formalism allows to discuss transitions between different reference frames; see also the Example below. • A more subtle physical motivation is the following: It is well known that when considering systems with periodically time-varying parameters one finds, in several contexts, a geometric phase after one cycle [ 2 , 10 , 16 , 17 ] . It was observed by Zak [ 21 ] (see also [ 14 ] ) that if the parameters vary non-periodically, but periodically up to a gauge transformation, then one is still able to analyze the system. It is natural to extend the concept of periodicity (or, in the extreme case, constancy) up to gauge transformation in general dynamics. • Finally, we recall that attention of physicists was already called to the appearance of gauge transformations in simple dynamical systems [ 19 ] ; for obvious physical reasons, however, this attention was focused on Hamiltonian systems, while here we discuss general dynamical systems. Example 1 . Rotating reference frame • Consider two cartesian reference frames, say with the same origin for the sake of simplicity; we choose one of these, denoted as F , to be a (fixed) Newtonian one, and the other, denoted as M , to be a mobile one rotating w.r.t. F with angular velocity {\bf A} . Given a vector quantity {\bf v}(t) , we have \left[\frac{d{\bf v}}{dt}\right]_{F}\ =\ \left[\frac{d{\bf v}}{dt}\right]_{M}\ +\ {\bf A}\wedge{\bf v}\ . (3) Correspondingly, we will denote total time derivatives in the two reference frames as D_{t}^{(F)} and D_{t}^{(M)} respectively, and the relation above can be written as D_{t}^{(F)}\ =\ D_{t}^{(M)}\ +\ {\bf A}\wedge\ . (4) Note that here rotations are completely arbitrary in three-dimensional space. • Consider now the case where dynamics takes place in the (x_{1},x_{2}) plane, and the (in general, non-uniform) rotation is also within this plane, with angular velocity \omega=\omega(t) . Passing to the mobile frame we introduce new variables {\bf w}=(w_{1},w_{2}) with {\bf w}\ =\ R[\vartheta(t)]\ {\bf x}\ ,\ \ \ R[\vartheta]\ =\ \begin{pmatrix}\cos\vartheta&-\sin\vartheta\\ \sin\vartheta&\cos\vartheta\end{pmatrix}\ where \vartheta=\vartheta(t)=\vartheta(0)+\int_{0}^{t}\omega(\tau)\ d\tau\ . • Let us consider a simple first order linear system defined in the fixed frame, \dot{{\bf x}}\ =\ K\ {\bf x} where {\bf x}=(x_{1},x_{2}) and K is a constant real matrix. By Remark 1 , in the new variables we have \frac{d}{dt}{\bf w}\ =\ \frac{d}{dt}(R\,{\bf x})\ =\ \dot{R}\,{\bf x}\ +\ R\,\dot{\bf x}\ =\ \dot{R}\,R^{-1}\,{\bf w}\ +\ R\,K\,R^{-1}\,{\bf w}\ :=\ L\,{\bf w}. Here L is an explicitly time-dependent real matrix, L=\dot{R}R^{-1}+RKR^{-1} , unless \dot{R}=0 . • We turn to nonlinear systems. Consider \dot{{\bf x}}\ =\ K\ {\bf x}-|{\bf x}|^{2}{\bf x}. A straightforward calculation yields the gauge transformed system \frac{d}{dt}{\bf w}\ =\ L\,{\bf w}-|{\bf w}|^{2}{\bf w} with L as above. The fact that only the linear part has changed depends on the very special form of the nonlinear one. • For a different nonlinear example consider \dot{{\bf x}}\ =\ K\ {\bf x}+\Phi({\bf x}) with, say, \Phi=(x_{1}x_{2},x_{2}^{2}) . In this case the transformed system is \frac{d}{dt}{\bf w}\ =\ L\,{\bf w}+\Psi({\bf w}) with L as above and \Psi\ =\ \left(w_{1}\,w_{2}\ +\ (w_{1}^{2}-w_{2}^{2})\,\sin\vartheta\,\cos\vartheta\ ,\ (w_{1}\,\sin\vartheta\ -\ w_{2}\,\cos\vartheta)^{2}\right). 2.2 Motivation from a mathematical perspective By Remark 1 , solutions of gauge transforms correspond to solutions of autonomous systems. Autonomous systems have special properties, such as admitting a local normalization (straightening near nonstationary points; Poincaré-Dulac normal forms near stationary points), and these – mutatis mutandis – carry over to gauge transforms. This correspondence will be elaborated in the following. Moreover the class of nonautonomous differential equations which are gauge transforms will be characterized in some detail, and it will be shown that they are – to some extent – identifiable through explicit computations. 3 Solution-preserving maps, symmetries We turn to structural properties of gauge transforms. 3.1 General properties We discuss the behavior with respect to solution-preserving maps. Consider another autonomous analytic ODE \dot{x}=g(x) (5) on an open subset of \mathbb{R}^{n} , and its gauge transform g^{*}(t,x) by A(t) . Proposition 1 . Assume that a local diffeomorphism \Phi sends solutions of ( 1 ) to solutions of ( 5 ), and define \Gamma(t,x):=A(t)\Phi(A(t)^{-1}x). Then \Gamma sends solutions of the gauge transform f^{*} to solutions of the gauge transform g^{*} : If z(t) solves ( 2 ), then \Gamma(t,z(t)) solves \dot{y}=g^{*}(t,y) . Proof. By

Read the complete text