Generation of high-power attosecond x-ray FEL pulses carrying orbital angular momentum

Chenzhi Xu 1, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, China 1 also at University of Chinese Academy of Sciences, Beijing, China Jiawei Yan, Gianluca Geloni, Christoph Lechner, European XFEL, Schenefeld, Germany Haixiao Deng, Shanghai Advanced Research Institute, · 2025

Read Generation of high-power attosecond x-ray FEL pulses carrying orbital angular momentum by Chenzhi Xu 1, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, China 1 also at University of Chinese Academy of Sciences, Beijing, China Jiawei Yan, Gianluca Geloni, Christoph Lechner, European XFEL, Schenefeld, Germany Haixiao Deng, Shanghai Advanced Research Institute, (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-06908.txt.

Introduction

Xu, Yan, Geloni, Lechner, and Deng propose a way to make ultra-short X-ray pulses that also swirl like corkscrews. Such vortex beams are a rising tool for probing matter. Their 2025 scheme adapts a self-seeding method for free-electron lasers, placing the optics early in the amplification chain where the beam is still gentle, which spares the optics from heat damage.

Simulations show the setup can deliver vortex pulses with peak power above one hundred gigawatts. Each pulse lasts only a few hundred attoseconds, a span far below a femtosecond. The authors present the design as a route to intense attosecond X-ray vortices. No hardware test is reported in the paper.

Catalog record

CREATORChenzhi Xu 1, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, China 1 also at University of Chinese Academy of Sciences, Beijing, China Jiawei Yan, Gianluca Geloni, Christoph Lechner, European XFEL, Schenefeld, Germany Haixiao Deng, Shanghai Advanced Research Institute,
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE13 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-06908

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Generation of high-power attosecond x-ray FEL pulses carrying orbital angular momentum Chenzhi Xu 1, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, China 1 also at University of Chinese Academy of Sciences, Beijing, China Jiawei Yan, Gianluca Geloni, Christoph Lechner, European XFEL, Schenefeld, Germany Haixiao Deng, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, China Abstract X-ray beams carrying orbital angular momentum (OAM), are emerging as a powerful tool to probe matter. Recently, a method called self-seeded FEL with OAM (SSOAM) has been proposed to generate high-power x-ray OAM pulses, which places the traditional optical elements in the linear regime of the FEL amplification process before saturation to reduce the thermal load of the optical element. In this work, we propose to utilize the SSOAM scheme to produce attosecond x-ray vortices with high intensity. Numerical simulations demonstrate the x-ray OAM pulses with peak powers of more than one hundred gigawatts and a pulse duration of the order of hundred attoseconds can be achieved using the proposed method. 1 INTRODUCTION Optical vortices carrying orbital angular momentum (OAM), characterized by a helical phase-front expressed as exp( il \phi ) where \phi denotes the azimuthal coordinate and l signifies the topological charge, have been the subject of intense interest. OAM light can be used in optical tweezers and optical spanner to trap and control particles [ ashkin1970acceleration , he1995direct ] . Besides, OAM light has proven successful in achieving quantum storage across diverse systems [ ding2015quantum , zhou2015quantum ] and optical communication [ barreiro2008beating ] . As the application of OAM light at optical wavelengths matures, people begin to seek shorter wavelength OAM light to reveal new physical phenomena [ shen2019optical ] .For example, hard x-ray helical dichroism has been demonstrated on disordered samples [ rouxel2022hard ] . X-ray OAM light is mainly provided by synchrotron radiation facilities. Meanwhile, with the development of ultrafast science [ orfanos2019attosecond ] and the appearance of attosecond OAM light [ wang2019intense , xu2021isolated , dorney2019controlling ] , attosecond pulses carrying OAM, mainly produced by high-order harmonic generation (HHG) sources [ wang2019intense , xu2021isolated , dorney2019controlling ] , are used to study photoemission dynamics [ hernandez2015quantum , hedse2018applications ] and generate light springs [ pariente2015spatio ] . However, there are challenges to produce attosecond OAM light in the x-ray range. It is difficult for synchrotron radiation devices to produce light at the attosecond level, while it is challenging to achieve hard X-ray level wavelengths with HHG-produced light. Compared with HHG and synchrotron radiation sources, modern x-ray free-electron lasers (XFELs) stand out as a potent tool for generating x-ray pulses characterized by high brightness and pulse durations spanning from tens of femtoseconds to few hundred attoseconds. Harmonic radiation generated in a helical undulator carries orbital angular momentum, as confirmed both theoretically and experimentally [ hemsing2014first , bahrdt2013first ] . Meanwhile, SSOAM, which involves using an optical element to introduce a helical phase to the radiation pulse in the linear regime, has demonstrated the ability to produce femtosecond-scale x-ray OAM light [ yan2023self ] . In this study, we focus on the generation of attosecond OAM light. We present a novel method for generating x-ray vortices characterized by high OAM purity, peak power, and short pulse duration in the as range. The innovative scheme is built upon SSOAM and achieves high power by combining enhanced self-amplified spontaneous emission (ESASE) [ zholents2005method ] with SSOAM. 2 ATTOSECOND OAM PULSE The configuration of our proposed scheme is illustrated in Figure assuming the presence of an ESASE setup preceding SSOAM. In other words, the electron beam initially passes through the linac and enters a wiggler magnet. At the same time a short fs laser enters the wiggler to modulate the electron beam in energy. Subsequently, the electron beam passes through a dispersive magnetic chicane to generate a periodic enhancement of the electron peak current. (a) (b) (c) Figure 1 : Schematic layout of the self-seeded FEL with attosecond OAM (a). Undulator parameter setting in the first stage (b) and the second stage (c). After modulation, the electron beam traverses a linearly tapered undulator, producing subfemtosecond x-ray pulses. The chirp-taper matching condition is expressed as [ duris2020superradiant , saldin2006self ] : \displaystyle\frac{dK}{dz}=\frac{\lambda_{r}^{2}}{\lambda_{u}^{2}K}\frac{d\gamma^{2}}{ds}, (1) where \lambda_{r} represents the emission wavelength, \lambda_{u} is the undulator period, K is the rms undulator parameter, and \gamma is the Lorentz factor of the beam, z denotes the position along the undulator, and s represents the position along the electron bunch. Due to the nature of the chirp, lasing takes place solely in regions of the electron bunch where the chirp-taper matching condition is satisfied. Consequently, the modulation gives rise to a radiation pulse significantly shorter than the modulation period. As lasing is confined to regions meeting the chirp-taper matching condition in the electron bunch, a laser pulse with a duration in the order of a hundred attoseconds is generated in the tail of the electron beam. To imprint the helical phase of a low-order OAM mode onto the FEL beam, we employ an optical element, such as a spiral phase plate (SPP) [ oemrawsingh2004production ] or spiral Fresnel zone plate (SZP) [ vila2014characterization ] . This process creates an OAM seed pulse with high purity. In order to host the optical element, the inclusion of a magnetic chicane is essential. This also destroys any residual microbunching from the first undulator. The primary objective is to precisely coincide the transformed XFEL beam with the unmodulated segment of the electron beam during the second stage of undulation, facilitating amplification. Therefore, it is imperative to employ a relatively long electron beam. The OAM seed pulse experiences substantial amplification within the second-stage undulator. Earlier investigations [ saldin2006self ] delved into chirped-tapered FELs. After reaching the saturation point, extending the interaction involves tapering the undulator to sustain resonance as the radiation slips past the initial lasing region, facilitating interaction with fresh electrons. This process results in amplification of the initial pulse. The theoretical part of this scheme is same as the SSOAM [ yan2023self ] . After the second stage, the light field can be represented as: \displaystyle\widetilde{E}(\hat{z},\hat{r},\phi)= \displaystyle\sum_{n}A^{(n)}\sum_{k}\alpha_{k}\Phi_{n-l,k}^{(II)}(\hat{r}) (2) \displaystyle\exp\left(\lambda_{k}^{(II,n-l)}\hat{z}\right)\exp[-i(n-l)\phi] where A^{(n)} is complex coupling constants, \alpha_{k} are complex coefficients, \Phi_{n-l,k}^{(II)} are the FEL eigenfunctions of the second (II) stage, \lambda_{k}^{(II,n-l)} the corresponding eigenvalues, \hat{r}=r/r_{0} and \hat{z}=\Gamma z normalized versions of the physical longitudinal and radial coordinates z and r according to the definitions in [ saldin2000diffraction ] , n is azimuthal harmonic. In the second stage, amplification will be best for m=n-l=0 and k=1 that corresponds to the main FEL eigenmode of the second (II) stage (and zero topological charge). However, initially, the larger mode will be for n=0 to the dominant contribution in the first (I) stage transformed to a topological charge of h=l by the optical element and the following diffraction. In the initial part of the second stage, this topological charge is dominant (and will be amplified as well), but along the undulator it will lose the competition to the fundamental FEL mode of the second stage, which has zero topological charge and is amplified at a faster rate. Amplification must be stopped before that point. To further illustrate the proposed scheme, a detailed example based

Read the complete text