Capacity of MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Matteo Nerini, Bruno Clerckx · 2025

Read Capacity of MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs) by Matteo Nerini, Bruno Clerckx (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-05983.txt.

Introduction

Matteo Nerini and Bruno Clerckx find the data rate limits of analog-aided wireless in this 2025 paper. Future networks may use thousands of antennas, a scale digital hardware handles poorly. Microwave linear analog computers process signals in the analog realm itself, trimming cost and complexity.

The team models a system where such devices shape beams at both the sender and the receiver. They set up the rate maximization problem for that pairing. The results mark the best rates such hybrid systems can reach. Analog help could make gigantic antenna arrays practical. The paper gives designers the ceiling to aim at.

Catalog record

CREATORMatteo Nerini, Bruno Clerckx
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE69 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-05983

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Capacity of MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs) Matteo Nerini, Bruno Clerckx Abstract Future wireless systems, known as gigantic multiple-input multiple-output (MIMO) , are expected to enhance performance by significantly increasing the number of antennas, e.g., a few thousands. To enable gigantic MIMO overcoming the scalability limitations of digital architectures, microwave linear analog computers (MiLACs) have recently emerged. A MiLAC is a multiport microwave network that processes input microwave signals entirely in the analog domain, thereby reducing hardware costs and computational complexity of gigantic MIMO architectures. In this paper, we investigate the fundamental limits on the rate achievable in MiLAC -aided MIMO systems. We model a MIMO system employing MiLAC -aided beamforming at the transmitter and receiver, and formulate the rate maximization problem to optimize the microwave networks of the MiLACs , which are assumed lossless and reciprocal for practical reasons. Under the lossless and reciprocal constraints, we derive a global optimal solution for the microwave networks of the MiLACs in closed form. In addition, we also characterize in closed-form the capacity of MIMO systems operating MiLAC -aided beamforming. Our theoretical analysis, confirmed by numerical simulations, reveals that MiLAC -aided beamforming achieves the same capacity as digital beamforming, while significantly reducing the number of radio frequency (RF) chains, analog-to-digital converters (ADCs) / digital-to-analog converters (DACs) resolution requirements, and computational complexity. I Introduction Sixth-generation (6G) wireless networks aim to deliver unprecedented data rates, ultra-low latency, and highly reliable connectivity. While massive multiple-input multiple-output (MIMO) technology, typically employing 64 antennas, has been effective for fifth-generation (5G) networks [ 1 , 2 ] , further scaling is essential to meet the requirements of 6G applications in the envisioned upper mid-band frequencies (7-24 GHz). For this reason, gigantic MIMO has been introduced as the new 6G MIMO technology [ 3 ] , denoted as Giga- MIMO in the Qualcomm 6G Vision White Paper [ 4 ] . By scaling the number of antennas dramatically up to a few thousands, gigantic MIMO is expected to enable finer beamforming and enhance spatial multiplexing, essential in 6G networks. Over the past decade, significant research efforts have been dedicated to designing MIMO architectures scalable to high numbers of antennas. Conventionally, fully digital MIMO architectures precode and combine the symbols in the digital domain, and require a radio frequency (RF) chain connected to each antenna element, as shown in Fig. 1 (a). Since the symbols are processed digitally, digital MIMO architectures offer maximum flexibility and, as a consequence, maximum performance. However, the RF chains include expensive and power-hungry components such as high-resolution analog-to-digital converters (ADCs) / digital-to-analog converters (DACs) and mixers, making this solution not scalable to gigantic MIMO . For this reason, several solutions have been proposed to perform beamforming partially or fully in the analog domain, easing the requirements on the number of RF chains and the resolution of ADCs / DACs . A popular alternative to digital beamforming is hybrid beamforming, where the symbols are precoded in the digital (or baseband) domain and also in the analog (or RF ) domain through a network of phase shifters or time delay units [ 5 , 6 , 7 ] , as shown in Fig. 1 (b). By processing the symbols also in the analog domain, hybrid beamforming can achieve performance comparable to that of digital beamforming, even with a reduced number of RF chains, which can be much lower than the number of antennas. Very recently, to further reduce the power consumption without sacrificing performance, the hybrid MIMO architecture has been generalized into the so-called tri-hybrid MIMO architecture [ 8 ] , represented in Fig. 1 (c). In tri-hybrid MIMO , the symbols are processed in three stages: i) in the digital domain, ii) in the analog domain through phase shifters or time delay units as in hybrid beamforming, and iii) in the electromagnetic (EM) domain through reconfigurable antennas. Examples of reconfigurable antenna technologies that can be used in tri-hybrid beamforming include metasurface antennas or reconfigurable intelligent surface (RIS) [ 9 ] , parasitic element-assisted antennas [ 10 ] , and fluid or movable antennas [ 11 , 12 ] . Exploiting reconfigurable antenna technologies, several strategies have been proposed to perform beamforming directly in the EM -domain. RISs deployed close to a transmitting device have been considered to steer the radiated signal toward the intended receiver [ 13 , 14 , 15 ] . To improve the flexibility of RIS , beyond diagonal RIS (BD-RIS) has emerged as a general family of RIS architectures allowing interconnections between the elements [ 16 , 17 , 18 ] , and stacked intelligent metasurface (SIM) has been proposed by exploiting the flexibility of multiple stacked RISs [ 19 , 20 , 21 ] . In addition, dynamic scattering arrays have been studied, where multiple scattering elements jointly contribute to the EM processing of the radiated signal [ 22 ] . The use of impedance networks operating in the EM domain has also been considered to reduce the burden on the baseband unit in decentralized multi-antenna architectures [ 23 ] . Fig. 1: Representation of (a) digital, (b) hybrid, (c) tri-hybrid, and (d) MiLAC-aided MIMO architectures. Following this trend of shifting from digital to analog or EM processing, the concept of microwave linear analog computer (MiLAC) has recently been proposed in [ 24 , 25 ] . A MiLAC is a multiport microwave network composed of tunable impedance components, designed to receive input signals on specific ports and deliver output signals processed entirely in the analog domain. By exploiting the massive parallelism offered by analog computing, a MiLAC can compute various operations with remarkably reduced computational complexity, achieving performance levels unattainable with conventional digital computing [ 24 ] . One notable application of MiLAC is in wireless communications, where MiLAC -aided beamforming has been introduced to enable efficient beamforming in gigantic MIMO systems [ 25 ] . MiLAC -aided beamforming is illustrated in Fig. 1 (d), showing that some of the ports of the MiLAC are connected to the RF chains carrying the symbols, while others are connected to the antennas. Since MiLAC -aided beamforming processes the transmitted symbols fully in the analog domain, it offers five advantages that significantly reduce hardware cost and computational complexity, thereby enabling gigantic MIMO [ 25 ] . First , it can achieve the same flexibility and performance as digital beamforming. Second , it requires only the minimum number of RF chains, equal to the number of transmitted symbols (or streams). Third , it allows the use of low-resolution ADCs / DACs because the RF chains carry the symbols rather than their linear combinations. Fourth , it precodes and combines the symbols directly in the analog domain, thus avoiding the need for a matrix-vector multiplication at every symbol time. Fifth , it can perform zero-forcing beamforming (ZFBF) at the transmitter and minimum mean square error (MMSE) detection at the receiver with remarkably reduced computational complexity. To investigate the fundamental limits of the capabilities of a MiLAC , [ 25 ] has considered MiLACs having microwave networks that can be arbitrarily reconfigured. However, this design presents two main practical challenges. First, in [ 25 ] it is assumed that the tunable impedance

Read the complete text