Tuning Shear Rheology through Active Dopants

Amir Shee, Ritwik Bandyopadhyay, Haicen Yue · 2025

Read Tuning Shear Rheology through Active Dopants by Amir Shee, Ritwik Bandyopadhyay, Haicen Yue (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-05262.txt.

Introduction

Amir Shee, Ritwik Bandyopadhyay, and Haicen Yue tune soft materials in a 2025 physics paper. They mix passive particles with a few self-propelled ones and shear the blend in simulation. The question is how little active material it takes to loosen a stiff, glassy mix.

Even a small share of active particles fluidized the blend about as well as a fully active system. A single combined measure, the active share times the square of its speed, governed both flow behavior and the glass transition point. That rule gives a recipe: dial the share or speed of the active few to set the stiffness of the whole. The authors propose the trick for fine control of soft matter in the lab.

Catalog record

CREATORAmir Shee, Ritwik Bandyopadhyay, Haicen Yue
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-05262

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tuning Shear Rheology through Active Dopants Amir Shee, Ritwik Bandyopadhyay, Haicen Yue Abstract We numerically investigate the shear rheology of mixtures of active and passive Brownian particles, with varying fractions of active components. We find that even a small fraction of active dopants triggers fluidization with comparable efficiency to fully active systems. A combined parameter, active energy, given by dopant fraction multiplied by propulsion speed squared controls the shear rheology and glass transition of the active-passive mixtures. These results together provide a quantitative strategy for fine-tuning the mechanical properties of a soft material with small amounts of active dopants. The mechanical properties of disordered soft materials significantly change during the transition between fluid-like and solid-like states, as observed in systems ranging from synthetic colloidal suspensions Klongvessa et al. 2019 , emulsions Zhang and Makse 2005 , foams Durian 1995 ; Katgert et al. 2008 ; Katgert et al. 2009 , and granular matter Abate and Durian 2006 ; Keys et al. 2007 ; Majmudar et al. 2007 ; Morse et al. 2021a to dense biological tissues Angelini et al. 2011 and embryonic development Schötz et al. 2013 . The transition in passive systems can be controlled by factors such as density, external forces, microstructural organization, interparticle interactions, and temperature Pusey and van Megen 1986 ; Liu and Nagel 1998 ; Coussot 2005 ; Berthier and Biroli 2011 ; Liu and Nagel 2010 ; Ikeda et al. 2012 . Recent studies have demonstrated that active matter, consisting of self-propelled components, exhibits unique rheological behavior distinct from passive systems, leading to novel flow properties and phase transitions ten Hagen et al. 2011 ; Peshkov et al. 2016 ; Matoz-Fernandez et al. 2017 ; Asheichyk et al. 2019 ; Mitchel et al. 2020 ; Mandal and Sollich 2021 ; Reichert et al. 2021 ; Madden et al. 2022 ; Wiese et al. 2023 ; Bayram et al. 2023 ; Amiri et al. 2023 . With detailed balance breaking, active matter has shown special behaviors and phenomena, such as motility-induced phase separation (MIPS), giant number fluctuations (GNF), hyperuniformity, non-equilibrium glass transition (active glass) Berthier and Kurchan 2013 ; Ni et al. 2013 ; Berthier 2014 ; Levis and Berthier 2015 ; Bi et al. 2016 ; Berthier et al. 2017 ; Janssen 2019 ; Henkes et al. 2020 ; Paoluzzi et al. 2022 ; Keta et al. 2022 . In addition, active suspensions show dramatic rheological changes, including reduced viscosity Wiese et al. 2023 ; Mo et al. 2024 , shear thinning (and at high activity even shear thickening) Bayram et al. 2023 , and shear-induced orientation ordering Mandal and Sollich 2021 , and motility-induced velocity ordering Abbaspour et al. 2024 . Aiming to develop a general understanding of fluid-glass-jamming transitions in amorphous materials, the role of activity, as another source of energy to overcome local energy barriers, has also been compared to temperature Wiese et al. 2023 and external shear Mo et al. 2020 ; Morse et al. 2021b ; Agoritsas 2021 ; Villarroel and Düring 2021 . A distinctive feature of activity, as a local drive, is that it can be manipulated at the particle level, instead of system level. This enables the introduction of activity heterogeneity into the system, with the simplest case being a binary mixture of active and passive particles. Previous work has shown that small amounts of active particles can induce motility-driven phase separation Schwarz-Linek et al. 2012 or even promote crystallization in disordered materials Ni et al. 2014 . However, the quantitative role of various fractions of active doping in triggering the solid-to-fluid transition remains an open question. Here, we investigate how small-amount active doping controls the glass‑to‑fluid transition. We identify “active energy”, given by the dopant fraction multiplied by propulsion speed squared as the control parameter of transition. Remarkably, even a small dopant fraction (well below 50 percent) suffices to fluidize systems with comparable efficiency to fully active systems, revealing the non-negligible role of even a minimal amount of active components and suggesting a strategy to finetune soft materials’ properties with them. Figure 1: The shear velocity profile is shown on a cross-section in the x-y plane of the three-dimensional simulation box, representing a small fraction of active particles doped in passive particles. We simulate three-dimensional binary mixtures of soft active and passive Brownian particles under different shear strain rates and systematically varying the fraction of active Brownian particles i.e., active dopants. Here, we consider a dry active matter model to decipher the role played by self-propulsion alone Wysocki et al. 2014 ; Shaebani et al. 2020 ; Turci and Wilding 2021 ; Wiese et al. 2023 , excluding the fluid-mediated hydrodynamic forces and particle-wall interactions that are critical in dilute microswimmer suspensions Rafaï et al. 2010 ; Gachelin et al. 2013 ; López et al. 2015 ; Saintillan 2018 ; Papadopoulou et al. 2020 ; Martinez et al. 2020 ; Xu and Wu 2024 ; Espada Burriel and Colin 2024 . Moreover, hydrodynamic contributions are expected to become negligible at high densities, as observed in colloidal glasses Hunter and Weeks 2012 and confluent cell tissues Bi et al. 2016 ; Lawson-Keister and Manning 2021 ; Henkes et al. 2020 and absent in dry active systems Deseigne et al. 2010 ; Briand et al. 2018 ; Scholz et al. 2018 ; Baconnier et al. 2022 . Figure 2: Glass-Fluid Rheology with varying packing density( \phi ) and active fraction( \alpha ) with active strength (i.e., Péclet number) \mathrm{Pe}=10 . Flow curves (a, b) the shear stress, \langle\sigma_{xy}\rangle , and (c, d) the viscosity, \eta , at densities \phi=0.60,\ldots,0.72 . (a) and (c) depict the behavior for two active fractions: \alpha=0.0 (purely passive; solid symbols and solid lines) and \alpha=0.05 (small active fraction; open symbols and dashed lines). (b) and (d) illustrate the results for two relatively high active fractions, \alpha=0.35 (solid symbols and solid lines) and \alpha=0.50 (open symbols and dashed lines). The lines represent fits of the Herschel-Bulkley form in Eq. ( 3 ); used to extract yield stress \sigma_{Y} . Yield stress \sigma_{Y} as function of packing density \phi in (e) and active fraction \alpha in (f). (g) Phase diagram in \phi-\alpha plane. The black solid line corresponds to shifted power law \phi(\alpha)=\phi_{0}+a_{1}\alpha^{b_{1}} where a_{1},b_{1} are the fitting constants ( a_{1}\approx 0.064 , b_{1}\approx 0.16 ) with passive glass transition density \phi_{0}=0.61 Wiese et al. 2023 . The blue dashed dotted (red dotted) line represent skewness (excess kurtosis) of shear stress fluctuations for \dot{\gamma}=10^{-6} (see Fig. 3 in Supplemental Material Sup ). The black solid circle at \phi_{J}=0.648 represent passive athermal ( \alpha=0,~k_{B}T=0 ) Jamming transition Wiese et al. 2023 . The system comprises N particles, where a fraction, \alpha=N_{a}/N , are active particles. To suppress crystallization, each category of particles is further equally divided into two subtypes Olsson and Teitel 2007 ; Ikeda et al. 2012 ; Wiese et al. 2023 : small and large radii, resulting in four distinct particle types: A (small active), B (large active), C (small passive), and D (large passive); see Fig. 1 . The particle radii are defined as follows: R_{0}=0.5 is the radii of small particles (A and C). The radii of large particles (B and

Read the complete text