Hole spin qubits in unstrained Germanium layers
Lorenzo Mauro, Mauricio J. Rodríguez, Esteban A. Rodríguez-Mena, Yann-Michel Niquet · 2025
Read Hole spin qubits in unstrained Germanium layers by Lorenzo Mauro, Mauricio J. Rodríguez, Esteban A. Rodríguez-Mena, Yann-Michel Niquet (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-04977.txt.
Introduction
Lorenzo Mauro, Mauricio Rodríguez, Esteban Rodríguez-Mena, and Yann-Michel Niquet propose building hole spin qubits in plain, unstrained germanium, in a paper published in two thousand twenty-five. Strained germanium layers are a leading qubit platform, but their magnetic response is strongly directional, so performance swings wildly with small changes in field angle.
That anisotropy makes optimizing each qubit a fiddly, per-device hunt. The authors instead confine the holes at the interface of an unstrained bulk germanium substrate or thick buffer layer. Their modeling shows the gyromagnetic anisotropy drops considerably in that geometry. Rabi frequencies, which set control speed, and quality factors both improve over the strained designs. A wider sweet range of field orientations should survive. That tolerance matters for scaling to many qubits, where every device must work under shared conditions. The paper is a design study pointing fabrication in a simpler direction.
Catalog record
| CREATOR | Lorenzo Mauro, Mauricio J. Rodríguez, Esteban A. Rodríguez-Mena, Yann-Michel Niquet |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-04977
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Hole spin qubits in unstrained Germanium layers Lorenzo Mauro, Mauricio J. Rodríguez, Esteban A. Rodríguez-Mena, Yann-Michel Niquet Abstract Strained germanium heterostructures are one of the most promising material for hole spin qubits but suffer from the strong anisotropy of the gyromagnetic factors that hinders the optimization of the magnetic field orientation. The figures of merit (Rabi frequencies, lifetimes…) can indeed vary by an order of magnitude within a few degrees around the heterostructure plane. We propose to address this issue by confining the holes at the interface of an unstrained, bulk Ge substrate or thick buffer. We model such structures and show that the gyromagnetic anisotropy is indeed considerably reduced. In addition, the Rabi frequencies and quality factors can be significantly improved with respect to strained heterostructures. This extends the operational range of the qubits and shall ease the scale-up to many-qubit systems. I Introduction Hole spin qubits in semiconductor quantum dots have made remarkable progress as a compelling platform for quantum computing and simulation Loss and DiVincenzo 1998 ; Maurand et al. 2016 ; Froning et al. 2021 ; Camenzind et al. 2022 ; Wang et al. 2022 ; Fang et al. 2023 . One of their main assets is the efficient electrical manipulation enabled by the strong spin-orbit coupling (SOC) in the valence bands of semiconductor materials Winkler 2003 ; Rashba and Efros 2003 ; Kato et al. 2003 ; Golovach et al. 2006 ; Crippa et al. 2018 . In particular, planar germanium heterostructures now stand out as the state-of-the-art material for hole spin qubits Sammak et al. 2019 ; Scappucci et al. 2021 . The quality of epitaxial interfaces indeed reduces the disorder around the qubits Martinez and Niquet 2022 ; Varley et al. 2023 ; Massai et al. 2023 ; Martinez et al. 2024 , and the small effective mass of holes in Ge allows for larger quantum dots, which eases fabrication and integration. High-fidelity single and two-qubit gates have thus been reported in germanium heterostructures Watzinger et al. 2018 ; Hendrickx et al. 2020a ; Hendrickx et al. 2020b ; Hendrickx et al. 2021 ; Lawrie et al. 2023 ; Hendrickx et al. 2024 , in up to ten qubits John et al. 2025 . Singlet-triplet spin qubits Jirovec et al. 2021 ; Jirovec et al. 2022 ; Zhang et al. 2025 ; Tsoukalas et al. 2025 , manipulation by spin shuttling Wang et al. 2024 , and quantum simulation Wang et al. 2023 have also been demonstrated on this platform. In these heterostructures, the heavy-hole (HH) and light-hole (LH) subbands are strongly split by the biaxial strains resulting from the growth on a mismatched GeSi buffer Sammak et al. 2019 . As a consequence, the low-lying hole states have strong HH character, and thus show a highly anisotropic gyromagnetic response, with in-plane g -factors g_{\parallel}\lesssim 0.5 and out-of-plane g -factors g_{\perp}\gtrsim 10 Hendrickx et al. 2024 . Therefore, all relevant spin properties (Larmor and Rabi frequencies, lifetimes, …) vary rapidly (over \approx 1^{\circ} ) when the magnetic field crosses the heterostructure plane where these devices are usually operated Mauro et al. 2024 . This can hinder the optimal alignment of the magnetic field, especially in many-qubit systems with significant variability. Moreover, the small HH/LH mixing limits the maximum Rabi frequencies achieved in these devices. It would, therefore, be desirable to increase the HH/LH mixing and reduce the g -factor anisotropy. As discussed in Ref. Mauro et al. 2025 , this may be achieved with strain engineering, but a scalable design is still lacking. An alternative solution is to host the qubits in a bulk Ge substrate insulated from the gate stack by a thin, strained GeSi barrier Stehouwer et al. 2023 ; Pat . The quantum dots are then accumulated at the Ge/GeSi interface by the electric field from the gates. As the Ge substrate is unstrained, the HH/LH band gap is expected significantly smaller and the HH/LH mixing much stronger Bosco et al. 2021a . The growth of such a structure, with the formation of a high mobility hole gas at the interface, has actually been demonstrated very recently Costa et al. 2025 . In this work, we explore the prospects for unstrained bulk Ge qubits with detailed numerical simulations. We analyze the dependence of the g -factors on the electrical confinement, and show that the g -factor anisotropy can indeed be significantly reduced even for moderate HH/LH mixings. The stronger mixing increases the Rabi frequencies f_{\mathrm{R}} but decreases the dephasing time T_{2}^{*} ; nonetheless, the quality factor Q_{2}^{*}=2f_{\mathrm{R}}T_{2}^{*} is larger than in strained heterostructures. Most importantly, the dependence of these quantities on the magnetic field orientation is much broadened, allowing for an easier optimization of the operating point in many-qubit systems. We discuss the implications for the development of hole spin qubit technologies. II Results II.1 Device and methodology In order to compare strained and unstrained Ge qubits, we consider the same prototypical device as in Refs. Martinez et al. 2022 ; Abadillo-Uriel et al. 2023 (see Fig. 1 ). The heterostructure comprises a Ge well with thickness L_{w} laid on Ge 0.8 Si 0.2 and capped with a 20-nm-thick Ge 0.8 Si 0.2 barrier. The difference of potential between the central C gate and the side L, R, T, and B gates on top of the heterostructure shapes a quantum dot in the Ge well. We address two hypotheses: i ) the whole heterostructure is grown coherently on a thick Ge 0.8 Si 0.2 buffer with a small, residual in-plane strain \varepsilon_{\mathrm{buf}}=0.26\% . The Ge well then undergoes compressive biaxial strains \varepsilon_{xx}=\varepsilon_{yy}=\varepsilon_{\parallel}=-0.61\% and \varepsilon_{zz}=\varepsilon_{\perp}=0.45\% . This case is representative of the experimental, strained Ge heterostructures Sammak et al. 2019 ; ii ) the Ge well is unstrained but the Ge 0.8 Si 0.2 layers undergo tensile strains \varepsilon_{xx}=\varepsilon_{yy}=0.87\% and \varepsilon_{zz}=-0.66\% . The bulk germanium device is the limit L_{w}\to\infty 1 1 1 The bulk germanium device is practically modeled as L_{w}=170 nm. . Although finite L_{w} ’s may hardly be grown, they provide valuable insights into the physics of the device. In both configurations, the barrier at the Ge/GeSi interface is \Delta E_{\mathrm{HH}}\approx 140 meV for HH states and \Delta E_{\mathrm{LH}}\approx 80 meV for LH states. Figure 1: The test device is made of a Ge well (red) with thickness L_{w} ranging from 10 nm to L_{w}\to\infty (bulk). It is capped with a 20-nm-thick Ge 0.8 Si 0.2 barrier (blue). The dot is shaped by five Al gates (gray) embedded in 5 nm of Al 2 O 3 . The diameter of the central gate is d=100 nm. The yellow shape illustrates the location and shape of the quantum dot. The orientation of the magnetic field \mathbf{B} is characterized by the angles \theta and \varphi in the crystallographic axes set x=[100] , y=[010] and z=[001] . The spin of a single hole trapped in this quantum dot is manipulated with radio-frequency signals applied either to the central or side gates. We compute the potential created by the gates with a finite volumes Poisson solver, then the wave function of the hole with a finite-differences discretization of the Luttinger-Kohn Hamiltonian Martinez et al. 2022 ; Abadillo-Uriel et al. 2023 ; Luttinger