Harnessing curvature for helical wave generation in spiral-based metamaterial structures
Mohamed Roshdy, Osama R. Bilal · 2025
Read Harnessing curvature for helical wave generation in spiral-based metamaterial structures by Mohamed Roshdy, Osama R. Bilal (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-04903.txt.
Introduction
Mohamed Roshdy and Osama Bilal make helical elastic waves with spiral sheets in a 2025 paper. Straight elastic waves serve imaging and health checks of structures. Waves that corkscrew along a curve are far harder to make and steer. Their trick is to decorate sheets with Archimedean spirals.
Standard actuators launch the waves into the patterned sheets. The waves then travel curved paths without bouncing back, in a topologically guarded way. No guides or domain walls are needed, and one source suffices. Flat plates, bent plates, and full cylinders all keep the effect. Beam direction and helicity can be tuned by mode choice. New sensing paths open up.
Catalog record
| CREATOR | Mohamed Roshdy, Osama R. Bilal |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-04903
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Harnessing curvature for helical wave generation in spiral-based metamaterial structures Mohamed Roshdy, Osama R. Bilal Abstract Linearly polarized elastic waves propagating in a linear path have been extensively explored in numerous applications from biomedical imaging to structural health monitoring. However, elastic waves propagating in a circularly polarized helical path are less explored because of the challenges in their generation and control. In this paper, we harness conventional actuation methods combined with sheets decorated by Archimedean spirals to generate elastic helical waves. We show that our metamaterials can support the propagation of such waves along a curved path without backscattering in a topologically protected manner. Moreover, we also show the creation and propagation of helical waves in our metamaterials without the need to wave guiding or domain interfaces, all with a single mode excitation source. We establish our methodology for flat plates and show the wave evolution as the metamaterials transition from slightly curved plates to fully curved cylinders. We observe the preservation of topologically protected edge states and helical wave beaming at different frequencies without the need to domain interferences. Furthermore, we leverage the mode to tune the helicity of the propagating waves. Our methodology can open new avenues for the generation and control of elastic helical waves using single source actuation that can be used in numerous applications. The propagation of elastic waves in solid media can involve the coupling of both volumetric and shear mechanical deformations of the particles within the solid. In a conventional isotropic solid, the wave propagation speeds are vastly different for longitudinal versus shear polarizations. This poses a challenge to the generation and control of polarized elastic waves in solids Long et al. 2018 ; Yuan et al. 2021 ; Lee et al. 2024a ; Lee et al. 2025 ; Yu et al. 2018 ; Lee et al. 2024b , in contrast to electric or magnetic waves propagating in free space or acoustic waves propagating in a fluid medium Shi et al. 2019 ; Long et al. 2020 . In addition, for an elastic wave to travel in a circularly polarized helical path, both the shear and longitudinal wave components must be locked with a 90 ∘ phase difference. Due to the complexity in generating and supporting the propagation of helical waves in solids, i.e., waves propagating in circular inclined wavefronts, the utility of these waves is far less explored in both the literature and practice. Moreover, in most cases, helical waves are considered in Cartesian coordinates with little to no regard to curvature. Curvature, a prevalent trait in both natural and engineered systems, introduces more challenges in the analysis, modeling, and control of such waves Conoir et al. 1993 ; Marston 1997 ; Thothadri and Moon 1998 ; Haumesser et al. 2001 ; Blonigen and Marston 2002 ; Perton et al. 2006 ; Leonard and Hinders 2003 ; Tyutekin 2004 ; Balvantin et al. 2013 ; Baltazar et al. 2015 ; Oukhai et al. 2024 ; Sadowski and Rotter 2014 ; Senga and Larsen 2017 ; Manconi et al. 2018 ; Treyssède 2008 ; Treyssède 2007 ; Treyssède and Laguerre 2010 ; Treyssède 2011 . Here, we propose the utilization of metamaterials to generate and support the propagation of helical waves. Metamaterials are artificial, periodic structures designed to exhibit unconventional properties, as a result of their geometric design rather than their chemical composition. These unconventional properties include negative effective Poisson’s ratio, negative effective mass, or negative effective stiffness Deshpande et al. 2001 ; Greaves et al. 2011 ; Huang et al. 2009 ; Zhou et al. 2012 . Metamaterials have been utilized to guided acoustic helical wavefronts in fluids Zhu et al. 2016 ; Esfahlani et al. 2017 ; Fan et al. 2019 , transfer angular momentum to a fluid in contact with a solid Chaplain et al. 2022a ; Chaplain et al. 2022b , or spin-orbit coupling in helically curved rods Yang and Ren 2024 . Despite these attempts, the generation of helical waves in curved structures remains challenging due to the complexity of the required designs and excitation methods Lee et al. 2024b . Metamaterials have been utilized in numerous applications, such as energy harvesting Lv et al. 2013 ; Qi et al. 2016 ; Jo et al. 2020 , actuation and sensing Gallego-Juarez 1989 ; Vasile and Thompson 1979 , and imaging Li et al. 2009 with the majority of the literature focusing on linear longitudinal or transverse elastic guided waves. The simplicity of our proposal can be illustrated by considering a homogeneous cylinder excited with a single-polarization actuator [Fig. 1 a]. The cylinder can oscillate either axially, in the direction of the wave propagation (i.e., longitudinal waves), or transversely, perpendicular to the direction of the wave propagation (i.e., shear waves). To introduce helicty, a precise 90 ∘ out-of-phase excitation with longitudinal and transverse excitation is usually utilized, resulting in helical waves. Instead, our approach is to decorate the cylinder with a topologically protected spiraling interface enabling the generation of backscattering-immune helical waves with a controlled number of helical turns [Fig. 1 b]. In addition, in case spatial uniformity is necessary, we show an alternate method to generate helical waves in a uniform meta-cylinder without the need for a waveguide through beaming [Fig. 1 c]. Through our approach, both the number of turns within the wave helix and its rotation direction (clockwise or counterclockwise) can be tuned. Figure 1: Helical wave generation in a cylinder . a) Longitudinal and shear (transverse) waves in a homogeneous cylinder and helical wave excitation with complex phase-locking in a homogeneous cylinder. Simple single mode excitation of helical wave with b) topologically protected interface along a metamaterial cylinder and c) a uniform (no interface) metamaterial cylinder with an intrinsic beaming mode. I RESULTS AND DISCUSSION In order to elucidate our methodology, we start by sculpting the wave dispersion relation through rational design. Metamaterial dispersion band diagrams can be used to predict and engineer unusual dynamical characteristics, such as steering elastic waves to propagate along a specific path rather than dispersing in all directions (i.e., wave beaming) Langley 1996 , or to propagate only along the edges of the structure while remaining robust against defects, disorder, or perturbations (i.e., topologically protected) Kane and Mele 2005 . Within these dispersion bands, frequency gaps can evolve as a function of the metamaterial’s basic building block (i.e., unit cell). Band gaps for elastic waves can open due to different physics phenomena, including Bragg scattering, local resonance, and inertia amplification. Each of these band gap opening mechanisms usually requires a specific design strategy. However, there exists a unified approach to utilize all these band gaps based on introducing Archimedean spiral cuts within a flat plate Foehr et al. 2018 . By changing the spiral parameters, different patterns emerge, leading to the opening of various types of band gaps. This approach remains limited to flat spiral-based metamaterials and without experimental realization Foehr et al. 2018 . Here, we extend the design framework to curved structures and experimentally validate the dynamic behavior of the resulting designs (both flat and curved). The spiral parameters are outer radius R , inner radius r , cutting width W , orientation angle \alpha , and number