Signatures of the Fermi surface reconstruction of a doped Mott insulator in a slab geometry
Gregorio Staffieri, Michele Fabrizio · 2025
Read Signatures of the Fermi surface reconstruction of a doped Mott insulator in a slab geometry by Gregorio Staffieri, Michele Fabrizio (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-04155.txt.
Introduction
Gregorio Staffieri and Michele Fabrizio peel a doped Mott insulator layer by layer to watch its Fermi surface change character, in a 2025 paper. Correlations strengthen near the surface of such a slab. Their simulations show hole-like pockets on the outer layers that melt, layer by layer, into one electron-like surface deep inside. The team also tracked the ripples a surface sends through the electron sea.
Both those ripples and a new diagnostic quantity flag the surface change without any momentum-space tricks. The diagnostic watches a classic counting rule, Luttinger's theorem, break down exactly where the topology flips. The authors offer both signals as reliable probes of Fermi surface reconstruction in layered quantum materials.
Catalog record
| CREATOR | Gregorio Staffieri, Michele Fabrizio |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-04155
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Signatures of the Fermi surface reconstruction of a doped Mott insulator in a slab geometry Gregorio Staffieri, Michele Fabrizio Abstract We investigate a hole-doped Mott insulator in a slab geometry using the dynamical cluster approximation. We show that the enhancement of the correlation strength at the surface results in the remarkable evolution of the layer-projected Fermi surface, which exhibits hole-like pockets in the superficial layers, but gradually evolves into a single electron-like surface in the innermost layers. We further analyze the behavior of the Friedel oscillations induced by the surface and identify distinct signatures of the Fermi surface reconstruction as function of hole-doping. In addition, we introduce a computationally tractable quantity that diagnoses the same Fermi surface variation by the concurrent breakdown of Luttinger’s theorem. Both the latter quantity and the Friedel oscillations serve as reliable indicators of the change in Fermi surface topology, without the need for any periodization in momentum space. Introduction One of the many captivating features of high-T c copper-oxide superconductors is the evidence of a Fermi surface reconstruction upon hole doping Taillefer 2009 ; Sebastian and Proust 2015 ; Proust and Taillefer 2019 . In the overdoped regime, the Fermi surface is electron-like, large Vignolle et al. 2008 and aligns with Luttinger’s theorem Luttinger 1960 . Conversely, in the opposite underdoped regime the Fermi surface consists of Fermi pockets Norman et al. 1998 ; LeBoeuf et al. 2007 ; Doiron-Leyraud et al. 2007 ; Meng et al. 2009 ; Hartstein et al. 2020 ; Kunisada et al. 2020 that appear to violate Luttinger’s theorem and coexist with a pseudogap at the antinodal points Timusk and Statt 1999 ; Damascelli et al. 2003 ; Sobota et al. 2021 . In angle-resolved photoemission, these pockets resembles Fermi arcs Norman et al. 1998 ; Meng et al. 2009 , which is likely due to the interference with a nearby Luttinger surface Yang et al. 2006 ; Rice et al. 2011 ; Robinson et al. 2019 ; Fabrizio 2022 , the location in momentum space of the zeros of the Green’s function at zero frequency Dzyaloshinskii 2003 , as opposed to the location of poles that defines the Fermi surface. Indeed, the existence of a Luttinger surface in the underdoped regime of cuprates explains both the presence of a pseudogap in the spectrum and the violation of Luttinger’s theorem Heath and Bedell 2020 ; Skolimowski and Fabrizio 2022 . Evidence of a similar doping-driven Fermi surface reconstruction has been also discovered in the simple single-band Hubbard model by means of various numerical techniques, ranging from variational Tocchio et al. 2012 and diagrammatic Rossi et al. 2024 Monte Carlo methods, to cluster extensions of dynamical mean-field theory Stanescu and Kotliar 2006 ; Maier et al. 2005 ; Stanescu et al. 2006 ; Sakai et al. 2009 ; Sakai et al. 2010 ; Sordi et al. 2010 ; Gull et al. 2010 ; Yamaji and Imada 2011 ; Gull et al. 2013 ; Scheurer et al. 2018 ; Wu et al. 2018 ; Bragança et al. 2018 ; Singh et al. 2022 . In this study, we explore the intriguing effects of such Fermi surface reconstruction on doping a slab of a model Mott insulator. We investigate this phenomenon using the dynamical cluster approximation Maier et al. 2005 . The slab geometry presents several intriguing avenues that merit exploration. In particular, in Sec. I we study the doped Mott insulating slab with open boundary conditions. We demonstrate that the effective enhancement of correlation strength at the surface, which is responsible for the phenomenon known as the surface dead layer effect Borghi et al. 2009 ; Tagliente et al. 2025 , results in a non-uniform distribution of doping that decreases as we approach the surface. Consequently, a layer-dependent Fermi surface reconstruction occurs that could be experimentally investigated in a similar manner to the dead layer effect Rodolakis et al. 2009 . In Section II , we study the Friedel oscillations that arise from the open geometry of the slab. We show that these oscillations can serve as an additional tool to discern the changes in the size and shape of the Fermi surface as the doping level is increased. Finally, Section III is devoted to Conclusions. I Layer dependent Fermi surface reconstruction Figure 1 : Sketch of the slab geometry for N=5 layers, which are stacked along \mathbf{x} axis. The intra-layer sites are identified by the \mathbf{R} vector coordinates. We consider a slab composed of N layers, each of which is described by a two-dimensional (2D) Hubbard model with nearest neighbor hopping t . Nearest neighbor layers are in turn coupled to each other by an interlayer hopping t_{\perp} , as illustrated in Fig. 1 . The system has periodic boundary conditions along \mathbf{y} and \mathbf{z} , while open boundary conditions are imposed along \mathbf{x} . The Hamiltonian reads \displaystyle H \displaystyle=-t\,\sum_{\ell=1}^{N}\,\sum_{\langle\mathbf{R}\mathbf{R^{\prime}}\rangle\sigma}\,\big(c^{\dagger}_{\mathbf{R}\ell\sigma}c^{\phantom{\dagger}}_{\mathbf{R^{\prime}}\ell\sigma}+H.c.\big) (1) \displaystyle-\mu\,\sum_{\ell=1}^{N}\,\sum_{\mathbf{R}\sigma}\,n_{\mathbf{R}\ell\sigma}+U\,\sum_{\ell=1}^{N}\,\sum_{\mathbf{R}}\,n_{\mathbf{R}\ell\uparrow}\,n_{\mathbf{R}\ell\downarrow} \displaystyle-t_{\perp}\,\sum_{\ell=1}^{N-1}\,\sum_{\mathbf{R}\sigma}\,\big(c^{\dagger}_{\mathbf{R}\ell\sigma}c^{\phantom{\dagger}}_{\mathbf{R}\ell+1\sigma}+H.c.\big)\,. The operators c^{\phantom{\dagger}}_{\mathbf{R}\ell\sigma} and c^{\dagger}_{\mathbf{R}\ell\sigma} annihilate and create, respectively, one electron on site \mathbf{R} of layer \ell=1...N with spin \sigma=\uparrow,\downarrow , while n_{\mathbf{R}\ell\sigma}=c^{\dagger}_{\mathbf{R}\ell\sigma}\,c^{\phantom{\dagger}}_{\mathbf{R}\ell\sigma} . The other parameters are U , the on-site Hubbard repulsion, and \mu , the chemical potential. We study the Hamiltonian ( 1 ) by means of dynamical cluster approximation (DCA) Maier et al. 2005 . Within DCA, the Brillouin zone is partitioned into patches and the self-energy assumed constant within each patch, resulting in a piecewise function of momentum. We use the quantum impurity solver implemented within the TRIQS library Parcollet et al. 2015 , which employs a continuous time quantum Monte Carlo (CTQMC) evaluation of the partition function expanded in powers of the hybridization Seth et al. 2016 . Hereafter, we consider a partition of the Brillouin zone in four patches centered at the high symmetry points, \mathbf{\Gamma}=(0,0) , \mathbf{X}=(\pi,0) , \mathbf{Y}=(0,\pi) and \mathbf{M}=(\pi,\pi) , with the same tiling of Ref. Hettler et al. 2000 . This choice is the simplest one to access the antinodal points \mathbf{X} and \mathbf{Y} , which are important to study the Fermi surface reconstruction Bragança et al. 2018 . Layered systems, such as slabs, interfaces and heterostructures, have been extensively investigated by DMFT Helmes et al. 2008 ; Ishida and Liebsch 2009 ; Potthoff and Nolting 1999 , where the self-energy is assumed to be local in each layer but layer dependent, \Sigma_{\ell\ell^{\prime}}(i\omega_{n})=\Sigma_{\ell}(i\omega_{n})\delta_{\ell\ell^{\prime}} , where \omega_{n} are Matsubara frequencies. We improve this description by including the coarse-grained momentum effects of DCA, thus a self-energy matrix with components \displaystyle\Sigma_{\ell\ell^{\prime}}(i\omega_{n},\mathbf{P})=\delta_{\ell\ell^{\prime}}\,\Sigma_{\ell}(i\omega_{n},\mathbf{P})\,, where \mathbf{P} is one of the four patches. Within this approximation, the lattice Green function \hat{G}(i\omega_{n},\mathbf{k}) is a matrix in layer indices Helmes et al. 2008 whose inverse satisfies \hat{G}(i\omega_{n},\mathbf{k})^{-1}=i\omega_{n}+\mu-{\epsilon}(\mathbf{k})-\hat{\Sigma}(i\omega_{n},\mathbf{P_{\mathbf{k}}})+\hat{t}_{\perp}\,, (2) where \hat{t}_{\perp} is the matrix with elements t_{\perp} just between nearest neighbor layers, \mathbf{k} the momentum in the y - z plane, {\epsilon}(\mathbf{k})=-2t(\cos k_{y}+\cos k_{z}) , and \mathbf{P_{\mathbf{k}}} the patch reference momentum that contains \mathbf{k} . The local layer-dependent Green function is obtained averaging the diagonal elements of \hat{G}(i\omega_{n},\mathbf{k}) over each patch \displaystyle G(i\omega_{n},\mathbf{P},\ell)=\frac{\displaystyle\;1\;}{\displaystyle\;N_{\mathbf{P}}\;}\sum_{\mathbf{k}\in\mathbf{P}}\,G_{\ell\ell}(i\omega_{n},\mathbf{k})\,, (3) with N_{\mathbf{P}} the number of \mathbf{k} -points in the patch \mathbf{P} , and provides, through Dyson’s equation, the Weiss field of the effective four-site impurity model. The latter is in turn used to compute the layer- \ell partition function, thus closing the