Tungsten erosion and scrape-off layer transport modelling in L-mode helium plasma discharges in ASDEX Upgrade

G. Alberti, E. Tonello, C. Tuccari, F. Mombelli, S. Brezinsek, T. Dittmar, A. Hakola, A. Kirschner, K. Krieger, M. Rasinski, J. Romazanov, A. Uccello, A. Widdowson, M. Passoni, the ASDEX Upgrade Team, the EUROfusion Tokamak Exploitation Team · 2025

Read Tungsten erosion and scrape-off layer transport modelling in L-mode helium plasma discharges in ASDEX Upgrade by G. Alberti, E. Tonello, C. Tuccari, F. Mombelli, S. Brezinsek, T. Dittmar, A. Hakola, A. Kirschner, K. Krieger, M. Rasinski, J. Romazanov, A. Uccello, A. Widdowson, M. Passoni, the ASDEX Upgrade Team, the EUROfusion Tokamak Exploitation Team (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-03883.txt.

Introduction

Alberti and co-authors present a 2025 study on tungsten wear in a fusion device in Germany. Helium gas is used in test runs, and its effect on wall material must be known. Tungsten lines the part of the device where exhaust hits. The team modeled helium plasma runs with two major codes plus a simple estimate.

Near the strike points, the two helium ion types were found in near equal shares. Farther out, the double-charged type ruled. That type drove most of the tungsten wear at normal heat levels. Model results were checked against measured wear at the strike zone. Extra stray material may explain part of the gap. Two codes were also compared on how tungsten moves.

Catalog record

CREATORG. Alberti, E. Tonello, C. Tuccari, F. Mombelli, S. Brezinsek, T. Dittmar, A. Hakola, A. Kirschner, K. Krieger, M. Rasinski, J. Romazanov, A. Uccello, A. Widdowson, M. Passoni, the ASDEX Upgrade Team, the EUROfusion Tokamak Exploitation Team
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE58 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-03883

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tungsten erosion and scrape-off layer transport modelling in L-mode helium plasma discharges in ASDEX Upgrade G. Alberti, E. Tonello, C. Tuccari, F. Mombelli, S. Brezinsek, T. Dittmar, A. Hakola, A. Kirschner, K. Krieger, M. Rasinski, J. Romazanov, A. Uccello, A. Widdowson, M. Passoni, the ASDEX Upgrade Team, the EUROfusion Tokamak Exploitation Team Abstract Due to its unavoidable presence in thermonuclear DT plasmas and to its peculiar effects on materials, investigating the role of helium (He) in plasma-wall interaction (PWI) in current tokamaks is fundamental. In this work, PWI in L-mode He plasma discharges in ASDEX Upgrade (AUG) is modelled by exploiting simplified analytical approaches and two state-of-the-art codes. SOLPS-ITER is employed both to provide a suitable background plasma for erosion simulations and to interpret diagnostics measurements in terms of He +/2+ fraction. In particular, a 50-50% concentration of the two He ions is found in the proximity of the strike-points, while He 2+ represents the dominant population farther in the scrape-off layer (SOL). The role of He ion fraction on AUG tungsten divertor erosion is first estimated by means of a simple analytical model and, afterwards, by exploiting ERO2.0, showing the major impact of He 2+ in common AUG plasma temperatures. ERO2.0 findings are also compared with experimental erosion data in the strike-point region, showing the possible impact of extrinsic impurities on divertor erosion. Finally, the multi-fluid and kinetic approaches employed in this work to simulate W erosion and migration are compared, including W also in SOLPS-ITER modelling. The impact of target boundary conditions on the W source in SOLPS-ITER is investigated, in order to find a good agreement with ERO2.0 estimation. Then, W migration in the two codes is compared, showing a stronger W transport towards the X-point in ERO2.0 compared to present SOLPS-ITER simulations with no drifts. Similar W influx in core could be achieved by reducing anomalous diffusivity in ERO2.0. Keywords : He-plasma, SOLPS-ITER, ERO2.0, ASDEX Upgrade, tungsten sources 1 Introduction The understanding and control of plasma-wall interaction (PWI) in present-day tokamaks are crucial aspects to be addressed in view of nuclear fusion exploitation [ 1 ] . The high particle and power fluxes expected in future devices could cause severe damage to materials, such as erosion and melting. These processes represent also an impurity source for the plasma, which could increase dilution and cooling and potentially prevent high energy production [ 2 ] . Finally, eroded impurities can be redeposited in different locations inside the device, forming layers with different properties with respect to the underneath bulk material and increasing fuel retention due to co-deposition [ 3 ] . The presence of helium (He) in the plasma is expected to play a major role in influencing these phenomena [ 4 ] . As a product of D-T reactions, He will be always present as ash in future reactors. Its higher Z with respect to hydrogenic species can enhance material erosion and plasma dilution. Moreover, its peculiar interaction with metallic materials, such as tungsten (W), can cause important morphology changes on plasma-facing components (PFCs) surface, with the formation of ripples, nanobubbles and especially fiber-form nanostructures called fuzz [ 5 ] . Being able to predict and possibly mitigate these phenomena is thus of paramount importance. Helium plasmas present a peculiar characteristic with respect to hydrogenic ones which is often overlooked, namely the presence of ions with different charge. The He ion fraction is not directly measured by Langmuir probes (LPs) and can be hardly estimated during experiments. However, it is worth noting that ion charge is a fundamental parameter for erosion, since it determines the impact energy of He ions on the surface. Being able to predict this parameter, understanding how it behaves in different plasma conditions, and studying its role in erosion estimates is of great importance for the interpretation of PWI in He plasma. This is also fundamental to estimate the impurity sources into the main plasma, which can severely affect discharge control. Predicting He ion fraction could be important also for D-T plasma discharges, where a 5-10% He concentration is expected due to fusion reactions. Experimental campaigns in full He plasma have been recently carried out in different tokamaks, such as ASDEX-Upgrade (AUG) [ 4 ] and WEST [ 6 ] , mostly aiming at the investigation of PWI in helium. The choice of full He plasma for those experiments is justified by the need to achieve reactor relevant fluences in lower time and to concentrate on the physics caused by He, without the complicating interplay of other plasma species. In particular, pristine and pre-formed W fuzz samples have been exposed in L-mode and H-mode discharges in AUG He plasmas, to study W fuzz formation, growth and erosion [ 7 ] . W-coated monoblocks have been also exposed to L-mode He plasmas in WEST. Results showed that fuzz creation and erosion strongly depend on local plasma and surface conditions around the outer strike line. Depending on the position, new W fuzz was formed at AUG during helium exposure, or pre-existing W fuzz was completely eroded. At the same time, no W fuzz was formed on the divertor surfaces in WEST [ 7 ] , highlighting the higher complexity of fuzz dynamics in tokamaks with respect to more idealized studies on linear devices. In order to face the complexity of the depicted picture and support the interpretation of experimental findings, numerical models represent a suitable tool. In the case of He plasmas, estimating the He ion fraction and its impact on PFC erosion is almost only possible with modelling. Moreover, testing available tools in different plasma species with respect to hydrogen isotopes and developing complementary and simplified analytical descriptions are of interest to strengthen their interpretative and predictive capabilities for the design of future tokamaks, such as ITER and DTT [ 8 ] . In this work, the modelling of edge plasma and PWI is presented for an attached L-mode He plasma discharge in the AUG tokamak, with experimental conditions specifically tailored in the way that clear erosion would be obtained for experimental quantification. Two state-of-the-art codes are used for this purpose: SOLPS-ITER [ 9 , 10 ] , a 2D fluid-plasma and kinetic-neutral solver which assumes diffusive anomalous cross-field transport, and ERO2.0 [ 11 ] , a 3D Monte-Carlo and impurity transport code. The former is used to properly interpret experimental findings in terms of He +/2+ ion fraction and to provide a suitable plasma background for ERO2.0. The validation of these results against experimental data in AUG is presented in section 2 . The influence of He +/2+ fraction on W erosion is first estimated using a simple analytical model, described in section 3 . Then, SOLPS-ITER ion fractions, together with density, velocity and temperature distributions are provided to ERO2.0 to study AUG divertor erosion and the subsequent migration of impurities, which are discussed in section 4 . The obtained results are compared to the two simplified cases of full He + and full He 2+ plasma, to highlight the role of the correct ion fraction in erosion evaluation. The impact of parameters which are often unknown in tokamak discharges, such as oxygen presence in plasma and uncertainties in LP temperature measurements, is

Read the complete text