Influence of photon inverse emission on forward–backward asymmetry in dilepton production at LHC
V. A. Zykunov · 2025
Read Influence of photon inverse emission on forward–backward asymmetry in dilepton production at LHC by V. A. Zykunov (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-03736.txt.
Introduction
Vladimir Zykunov works out a faint photon effect in pair births at the Large Hadron Collider, in a study from 2025. When quarks clash, they can birth lepton pairs. The lean of those pairs, fore against aft, is a fine probe of deep force laws. Faint side acts can tilt the lean and fool the probe.
One such act is photon inverse emission, where a photon flips into the clash. Zykunov counts its share of pair births and of the fore-aft lean across a wide span of mass and speed, tuned to the CMS eye and its next runs. A trick with add-on fix terms keeps the count clean. At high mass, the share is not small, so probes of the lean must book it or risk a skewed law read.
Catalog record
| CREATOR | V. A. Zykunov |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-03736
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Influence of photon inverse emission on forward–backward asymmetry in dilepton production at LHC V. A. Zykunov Abstract Contribution of photon inverse emission to the dilepton production process in hadron collisions for Large Hadron Collider (LHC) experimental program is calculated in details. Numerical analysis of inverse emission effects on observable quantities (cross sections and forward-backward asymmetry) is performed in a wide kinematical region including the CMS LHC experiment in Run3/HL regime which corresponds to ultra-high energies and dilepton invariant masses. Effective technics of additive relative corrections is applied for analysis of the influence of different radiative contributions on forward–backward asymmetry. 1 Introduction Studies of lepton pair production in hadron collisions provides many opportunities for discovering new physical phenomena. For example, in the early 1980s, the UA1 and UA2 collaborations discovered at the CERN-based proton collider the carriers of weak interaction, W - CERN-W and Z -bosons CERN-Z . Currently, similar experiments at the LHC collider test the energy range above TeV searching for deviations from the Standard Model (SM) and the manifestations of a New Physics (NP): supersymmetric partners of known particles SUSY , manifestations of (super)string theory and M -theory M-theory , dark matter candidate particles Dark-matter , axions Axions , ultraweakly (feebly) interacting particles FIP , and etc. Detection of NP traces is one of the main perspectives for the development of modern physics. It is hoped that the search for NP phenomena will be successful after careful examination of the lepton pair (dilepton) production observables at large invariant masses of a dilepton. The Drell–Yan process DY2 ; DY2-2 (production of a dilepton in hadron collisions due to the annihilation of a quark-antiquark pair via a virtual photon or Z -boson) is conventionally distinguished from similar dilepton production processes where also hadron collisions are involved but the dilepton is produced due to another mechanism. One of such options is the production of a dilepton in photon fusion, another (but not last) is the boson (gluon or photon) inverse emission production. Most probably, NP will manifest itself in LHC experiments not via direct detection of new particles and/or new phenomena but in the form of minor deviations from SM predictions. The discovery of new physical phenomena in such a scenario is only possible by an extremely precise comparison of the experimental data with theoretical predictions. This requires the corresponding increasing of the accuracy of the theoretical description of the microworld processes under study and provision of experiments to be conducted at Run3/HL LHC with reliable and precision programs for calculating effects related to radiative corrections (RCs). Currently, a large number of various and mutually complementing programs and computer codes are available which pertain to this problem; they are reviewed, for example, in 50-Au . This paper also presents the physical content of one of these programs, READY (Radiative corrEctions to lArge invariant mass Drell–Yan process), which was developed by the author for estimating electroweak and QCD corrections to the Drell–Yan process. The contribution of photon inverse emission mechanism gives in the same order of perturbation theory as electroweak RCs to Drell–Yan process or two photon fusion mechanism. So, the goal of present paper is the detailed calculation of photon inverse emission contribution to the dilepton production process in hadron collisions for Large Hadron Collider experimental program aimed. 2 Mechanisms of dilepton production in hadron collisions There are different mechanisms of dilepton ( \ell^{-}\ell^{+},\ \ell=e,\mu,\tau ) production in hadron collisions: h_{A}(p_{A})+h_{B}(p_{B})\rightarrow\ell^{-}(p_{3})+\ell^{+}(p_{4})+X, (1) where p_{A} and p_{B} are 4-momenta of initial hadrons; p_{3} (p_{4}) is 4-momentum of final lepton \ell^{-} (antilepton \ell^{+} ) with mass m . Three possibilities are illustrated by Fig. 1 (for definiteness, we discuss dimuon \ell=\mu case mainly). Figure 1: Dimuon production in hadron collisions: a – Drell–Yan process, b – \gamma\gamma fusion, c – photon (gluon) inverse emission (from quark), d – photon inverse emission (from lepton). Unsigned line corresponds to photon or Z -boson. First of all, it is s -channel mechanism of quark-antiquark pair annihilation into dimuon (Fig. 1 a). The Drell–Yan process (which is realized via this mechanism) at the moment is studied well in details: at level of one-loop electroweak RCs and two-loop QCD RCs (see, for example 50-Au and papers cited there). The second possibilty is the \gamma\gamma fusion (see Fig. 1 b), this mehanism is investigated until one-loop electroweak RCs level in 55-Au ; 56-Au . To follow the accuracy {\cal O}(\alpha^{3}) we should take into account the gluon inverse emission (see 22-Au and recent paper 60-Au ) and photon inverse emission (Fig. 1 c and 1 d). Below we will denote these mechanisms and their configurations as follows: 1. DY = \{q\bar{q},\bar{q}q\} for the Drell–Yan process, 2. \gamma\gamma for the two photon fusion, 3. g\rm IE = \{gq,qg,g\bar{q},\bar{q}g\} for the gluon inverse emission, 4. \gamma\rm IE = \{\gamma q,q\gamma,\gamma\bar{q},\bar{q}\gamma\} for the photon inverse emission. First symbol in curle brackets denotes the parton from the first hadron h_{A} , the second one corresponds to the parton from the second hadron h_{B} . The parton mechanisms q\bar{q},gq,g\bar{q},\gamma q,\gamma\bar{q} will be denoted as direct configurations , the parton mechanisms \bar{q}q,qg,\bar{q}g,q\gamma,\bar{q}\gamma – as reverse configurations . For the observables of this paper both of them gives the identical contributions. Also we used the common index c for the type of mechanism: c={\rm DY},\gamma\gamma,g{\rm IE},\gamma{\rm IE}. (2) 3 Amplitudes on the parton level On the parton level in direct configuration the dilepton production with photon inverse emission looks like: \gamma(p_{1})+q(p_{2})\rightarrow\ell^{-}(p_{3})+\ell^{+}(p_{4})+q(p_{5}), (3) and Feynman diagrams corresponding to process ( 3 ) are presented in Fig. 2 . Figure 2: Feynman diagrams describing the photon inverse emission (upper diagrams correspond to photon-quark interaction and easily can be convert into gluon-quark diagrams). The notations of Fig. 2 are following: p_{1} is 4-momentum of initial photon; p_{2}\ (p_{5}) is 4-momentum of initial (final) quark; q_{1}=p_{3}+p_{4} or q_{2}=p_{2}-p_{5} are 4-momenta of intermediate boson (photon or Z -boson) of type a and b ( a,b=\{\gamma,Z\} ); p_{3}\ (p_{4}) is 4-momentum of (anti)lepton. Let us introduce the six (partonic) Lorentz invariants: \displaystyle s=(p_{1}+p_{2})^{2},\ \ t=(p_{1}-p_{3})^{2},\ \ u=(p_{2}-p_{3})^{2}, (4) \displaystyle s_{1}=(p_{3}+p_{4})^{2},\ \ t_{1}=(p_{2}-p_{4})^{2},\ \ u_{1}=(p_{1}-p_{4})^{2}. Also we will use the following invariants: w_{1}=2p_{1}p_{5},\ \ w_{2}=2p_{2}p_{5},\ \ w_{3}=2p_{3}p_{5},\ \ w_{4}=2p_{4}p_{5}. (5) Let us brifly present here the Feynman rules we used for the calculation (they are inspired by BSH86 ). 1. Incoming fermion with 4-momentum p denotes by bispinor u(p) , outgoing one is denoted by \bar{u}(p) . 2. Incoming boson with 4-momentum p denotes by polarization vector e_{\rho}(p) . 3. The boson propagator expressed by -ig^{\alpha\beta}D_{a}(q) , where q is 4-momentum transferred in propagator, and D_{a}(q)=(q^{2}-m_{a}^{2}+im_{a}\Gamma_{a})^{-1}. Photon mass equals to zero, mass of Z -boson denotes by m_{Z} , and its fixed width is \Gamma_{Z} . 4. The fermionic propagator with 4-momentum p looks like: \displaystyle iS(p)=i\frac{\hat{p}+m_{f}}{p^{2}-m_{f}^{2}},\ \ \ \hat{p}\equiv\gamma^{\mu}p_{\mu}. 5. Vertex of fermion f and gauge boson a is presented as ie\gamma_{\mu}\Gamma^{a}_{f},\ \ \mbox{where}\ \ \Gamma^{a}_{f}=v^{a}_{f}-a^{a}_{f}\gamma_{5}, and vector and axial-vector coupling constants have the following form: \!\!\!\!\!v_{f}^{\gamma}=-Q_{f},\ \ a_{f}^{\gamma}=0,\ \ v_{f}^{Z}=\frac{I_{f}^{3}-2Q_{f}s_{\rm W}^{2}}{2s_{\rm W}c_{\rm W}},\ \ a_{f}^{Z}=\frac{I_{f}^{3}}{2s_{\rm W}c_{\rm W}}. We used the following Standard Model parameters: Q_{f} is the electric charge of f -particle in proton charge units, 3rd components of weak isospin are I_{\nu}^{3}=+\frac{1}{2},\ \ I_{\ell}^{3}=-\frac{1}{2},\ \ I_{u}^{3}=+\frac{1}{2},\ \ I_{d}^{3}=-\frac{1}{2}, and s_{\rm