Extremely Large-Scale Movable Antenna-Enabled Multiuser Communications: Modeling and Optimization
Min Fu, Lipeng Zhu, and Rui Zhang · 2025
Read Extremely Large-Scale Movable Antenna-Enabled Multiuser Communications: Modeling and Optimization by Min Fu, Lipeng Zhu, and Rui Zhang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-02735.txt.
Introduction
Min Fu, Lipeng Zhu, and Rui Zhang propose a new antenna design for future wireless networks in a 2025 paper. Movable antennas can shift position to catch better signals, a trick eyed for 6G systems. Their design spreads movable subarrays over a very large area at a base station.
Wide spacing strengthens near-field effects and lets many users share the air at once. The authors build a channel model that captures how signal strength and sight lines change with position. They then derive a formula for the data rate the system can reach and tune the layout. The work guides how such large, flexible stations might be built.
Catalog record
| CREATOR | Min Fu, Lipeng Zhu, and Rui Zhang |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 81 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-02735
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Extremely Large-Scale Movable Antenna-Enabled Multiuser Communications: Modeling and Optimization Min Fu, Lipeng Zhu, and Rui Zhang Abstract Movable antenna (MA) has been recognized as a promising technology to improve communication performance in future wireless networks such as 6G. To unleash its potential, this paper proposes a novel architecture, namely extremely large-scale MA (XL-MA), which allows flexible antenna/subarray positioning over an extremely large spatial region for effectively enhancing near-field effects and spatial multiplexing performance. In particular, this paper studies an uplink XL-MA-enabled multiuser system, where single-antenna users distributed in a coverage area are served by a base station (BS) equipped with multiple movable subarrays. We begin by presenting a spatially non-stationary channel model to capture the near-field effects, including position-dependent large-scale channel gains and line-of-sight visibility. To evaluate system performance, we further derive a closed-form approximation of the expected weighted sum rate under maximum ratio combining (MRC), revealing that optimizing XL-MA placement enhances user channel power gain to increase desired signal power and reduces channel correlation to decreases multiuser interference. Building upon this, we formulate an antenna placement optimization problem to maximize the expected weighted sum rate, leveraging statistical channel conditions and user distribution. To efficiently solve this challenging non-linear binary optimization problem, we propose a polynomial-time successive replacement algorithm. Simulation results demonstrate that the proposed XL-MA placement strategy achieves near-optimal performance, significantly outperforming benchmark schemes based on conventional fixed-position antennas. I Introduction The rapid development of wireless communication networks has been driven by advancements in multi-antenna technologies, evolving from multiple-input multiple-output (MIMO) systems in the fourth-generation (4G) networks to massive MIMO in the 5G era, and anticipated to advance into extremely large-scale MIMO (XL-MIMO) systems in the 6G networks [ 1 , 2 ] . While these advancements promise enhanced spatial resolution and spectral efficiency, the increasing size of antenna arrays and associated radio frequency (RF) chains significantly increases hardware costs and energy consumption. To address this issue, antenna selection has been proposed as an alternative solution [ 3 ] , where a subset of antenna elements with favorable channel conditions is activated, at the expense of additional complexity in the required switching circuitry. Another promising direction into sparse and modular antenna arrays [ 4 , 5 ] proposes to reduce the number of active antenna elements by evenly distributing them over a given physical area, which creates a large virtual aperture to improve spatial resolution. However, all the aforementioned technologies rely on fixed-position antennas (FPAs), which cannot fully exploit channel variations in spatial regions and thus limit their communication performance. Recently, movable antenna (MA) technology has been regarded as a promising solution to fully exploit channel spatial variations via antenna movement [ 6 , 7 , 8 ] , sometimes also referred to as fluid antenna system in terms of flexible antenna positioning [ 9 ] . In contrast to traditional FPA architectures, by dynamically adjusting the positions of MAs within a region, MA-aided wireless systems offer several key advantages, such as signal-to-noise ratio (SNR) boost [ 7 , 10 ] , interference mitigation [ 11 ] , flexible beamforming [ 12 ] , and enhanced spatial multiplexing [ 13 , 14 , 15 ] , using the same number of antennas or even fewer compared to conventional FPA systems. Due to these advantages, extensive studies have delved into the antenna position optimization in various wireless systems. For instance, alternating optimization [ 13 , 16 ] , successive convex approximation [ 17 , 18 ] , gradient descent [ 14 , 19 ] , among others, were adopted to search for the locally optimal antenna positions in a continuous space based on the field-response channel model tailored to MA systems [ 7 ] . To reduce the implementation complexity, a group sparse MA architecture has been proposed in [ 20 ] , where multiple antennas are concurrently moved with the aid of a single driver. To acquire complete channel mappings between transmit and receive regions, compressed sensing-based approaches were proposed by recovering field-response information of channel paths [ 21 , 22 ] . To reduce overhead from frequent antenna movement and real-time channel estimation, optimizing MA positions based on statistical channel state information (CSI) has been proposed in [ 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 ] . For example, statistical-CSI-based MA position optimization has been used to maximize channel capacity in MA-aided MIMO systems [ 23 ] , extended to multiuser systems with a two-timescale design under Rician fading channels [ 24 , 25 ] , and also applied to enhance near-field communication performance [ 26 ] . Additionally, [ 27 ] introduced a statistical field-response channel model incorporating both light-of-sight (LoS) and non-light-of-sight (NLoS) components and developed a two-timescale optimization framework. In [ 28 , 29 , 30 ] , a six-dimensional (6DMA) system was proposed to optimize 3D positions and 3D rotations of antenna surfaces based on spatial user distribution for maximizing multiuser MIMO capacity. However, previous studies on MAs have mainly concentrated on wavelength-scale movement regions, where the variations are restricted to phase shifts, providing limited ability to combat large-scale path loss. To overcome these limitations, the pinching antenna technique [ 31 , 32 , 33 ] has been recently proposed, which activates antennas by applying small dielectric particles, such as plastic pinches, to a dielectric waveguide. The flexible positioning of pinching antennas along an extended length allows them to move closer to target users, establishing strong LoS channels and reducing large-scale path loss. However, pinching antennas with a shared RF chain can only be moved on a preconfigured 1D waveguide, which limits their movement flexibility and spatial multiplexing performance. Additionally, existing studies on pinching antenna systems have largely assumed pure LoS channels, which cannot fully capture real-world propagation environments with multipath effects. To address these issues, in this paper, we propose a new MA architecture, namely extremely large-scale MA (XL-MA), which allows for flexible movement of antennas/subarrays over a 2D extremely large region. By offering higher degrees of freedom (DoFs) in antenna placement, the XL-MA design significantly enhances the near-field effects of the entire array, thereby reducing multiuser channel correlation and improving spatial multiplexing performance. In particular, we investigate an uplink XL-MA-enabled multiuser communication system, where multiple single-antenna users spatially distributed over a given 3D area are served by a base station (BS) equipped with multiple movable subarrays. We aim to improve the long-term multiuser communication performance based on statistical channels and/or user distribution via XL-MA placement optimization. The contributions of this paper are summarized as follows: • We develop a 3D grid-based spatial model characterizing the user distribution, associating each grid with a reference position and a probabilistic indicator. A spatially non-stationary channel model is then presented to capture near-field effects and local propagation non-stationarity, incorporating position-dependent large-scale path gains for both LoS and NLoS components, angles of arrival (AoAs) with respect to (w.r.t.) antenna and user positions, and LoS visibility. Using these models, the multiuser system performance is evaluated via the expected weighted sum rate of all grids, which involves averaging over random user-activation indicators and channel matrix. • To reduce computational complexity for our design, we derive a closed-form analytical approximation for the