NELM: Modern Open-Source Software for Multipurpose Impedance Spectra Analysis Journal: Applied Soft Computing

Natalia A. Boitsova, Anna A. Abelit, Daniil D. Stupin · 2025

Read NELM: Modern Open-Source Software for Multipurpose Impedance Spectra Analysis Journal: Applied Soft Computing by Natalia A. Boitsova, Anna A. Abelit, Daniil D. Stupin (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-01997.txt.

Introduction

Natalia Boitsova, Anna Abelit, and Daniil Stupin present open software for impedance spectra analysis in a 2025 paper. Electrical impedance spectroscopy probes everything from circuits to living tissue, yet analysis tools lag the hardware: mostly private, dated code in old languages. Their package, NELM, runs in MATLAB or its free twin Octave.

NELM fits measured spectra to equivalent circuit models through a friendly interface, accepting many data formats and model types. It brings in modern tricks like symbolic math, parallel computing, and AI assistance. Trials in semiconductor, bioimpedance, and electrochemistry work showed the package handles real problems efficiently. The authors aim it at autonomous sensing devices and implants as well as lab benches.

Catalog record

CREATORNatalia A. Boitsova, Anna A. Abelit, Daniil D. Stupin
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE64 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-01997

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

NELM: Modern Open-Source Software for Multipurpose Impedance Spectra Analysis Journal: Applied Soft Computing Natalia A. Boitsova, Anna A. Abelit, Daniil D. Stupin Abstract Nowadays electrical impedance spectroscopy (EIS) has become an advanced experimental technique with a wide range of applications: from simple passive circuits diagnostics to semiconductor high-end device development and breakthrough technologies in bio-sensing. Although hardware for EIS today is well developed, the EIS analysis software is mainly custom, old fashioned, i.e. it is limited by features, does not utilize the progress in the modern computer science and hardware, and is usually implemented in close-source code or written on outdated programming languages, which causes slow progress in field of the EIS and complicates researchers attempts of development in EIS autonomous devices, such as implants. In this article, we introduce a free and open-sourced MatLab/GNU Octave package for EIS analysis called NELM, which provides powerful equipment tools for matching experimental impedance data with theoretical equivalent circuits. Our software has an user friendly interface and supports different formats of input data, fitting programs, and impedance models. In addition, we have developed NELM with implementation of the latest progress in computation science such as symbolic calculations, parallel computing, and artificial intelligence. The abilities of NELM were validated by its applications in the different fields of science, such as semiconductor studies, bioimpedance and electrochemestry, which demonstrated high-efficiency of the proposed software package and showed that it is a promising tool for solving actual problems in electronic industry, biosensorics, and healthcare technologies. † † graphicalabstract: Model Settings Experiment Data analyze Phenomena discover NELM CPU CPU CPU CPU CPE † † highlights: Multipurpose open-source software NELM for impedance spectra analyzing was designed NELM was written in well-tuned MatLab and is supported by the power of the parallel and symbolic computing Program efficiency was demonstrated on the different scientific tasks: from semiconductors to biology 1 Introduction Typical experimental science practices include two essential steps: data collection and data processing stupin2021bioimpedance , oppenheim1976digital , Tietze , DSP_Book_Dimitris , DSP_Book_Rawlings , DSP_Book_Yan , Statistics_book , Hansen . The final aim of the last step usually is to find the relationships in the experimental data, which can be achieved by matching it to some ab\,initio theory or to appropriate phenomenological models. For impedance spectroscopy, both theoretic and phenomenological models can often be represented in terms of equivalent circuits (EC), electrical schemes that have the same impedance as the sample under test Barsoukov , macdonald1982applicability , MacdonaldR . The advantage of such an approach consists in the possibility of separating in the observed spectra the phenomena with a distinct nature, because frequently different processes in the investigated samples can be attributed to certain elements in an equivalent circuit of the sample stupin2021bioimpedance , Barsoukov . Thus, fitting of the equivalent scheme parameters in order to match its impedance spectrum to the experimentally obtained spectrum provides a promising and powerful tool for the investigation of complex systems, including biological objects stupin2021bioimpedance , Stupin2017 , rahman2009detailed , qiu2008real , qiu2009intervention , chemical sensors ganguly2019passively , ismail2024facile , zarei2022impedimetric , shervedani2006novel , and semiconductor devices lee2021two , crain2013comparison , shervedani2006novel . For implementation of this EIS processing type, there are three common approaches: algebraic, geometric, and complex non-linear least squares (CNLS) stupin2021bioimpedance , macdonald1963cnls , MacdonaldD , Tsai , MacdonaldR , macdonald1982applicability . The algebraic approach consists of the evaluation of EC parameters using spectrum features (minima, maxima, peak position values, etc ). The geometric approach uses geometric manipulations with impedance spectra plots for estimation of EC parameters. The CNLS approach, introduced by J. Ross Macdonald in the 1960s macdonald1963cnls , today is the most common and accurate method for EC reconstruction, because it can be applied to a wide range of EC topologies and because it uses the whole measured spectrum points in contrast to algebraic and geometric methods. Due to these reasons, the NELM software is basically developed for producing CNLS approximations of the experimental immittance spectra. The key idea of the CNLS method, which we illustrate in the case of admittance representation, is to minimization of the functional E^{2}=\dfrac{1}{L}\sum\limits_{\ell=1}^{L}|Y_{m}(\omega_{\ell})-Y_{ex}(\omega_{\ell})|^{2}\times\mathcal{W}(\omega_{\ell})=\min, (1) where Y_{ex}(\omega_{\ell}) is experimentally obtained admittance at the frequency \omega_{\ell} , Y_{m}(\omega_{\ell}) is the EC model admittance at the same frequency, L is the total spectrum measured points, and E^{2} is the mean squared error, or so-called working function in the terms of optimization theory, \mathcal{W}(\omega_{\ell})\geq 0 is the weight of the data-point at \omega_{\ell} frequency. Instead, the admittance Y in Eq. ( 1 ) can be used with any immittance value, such as impedance, impedance magnitude, etc (see Sec. 4.1 ). Because typically the EC impedance depends on the ECs’ parameters in the indirect, non-linear manner, for solving Eq. ( 1 ) was used the numerical optimization methods, the most popular of which are gradient descent, Gauss-Newton, Levenberg-Marquardt, and Nelder-Mead nocedal1999numerical . The earliest known wide-spread software for providing CNLS impedance analysis is the famous LEVM program by J. Ross Macdonald, which is often used today, despite its limitations and the fact that it is technically outdated LEVM_manual . One of the commonly used today commercial software for EIS is EC-lab by BioLogic (France) EC_Lab_manual , which is usually connected to a BioLogic device, allowing users to analyze data in the same program that they used to gather it. This program version 11.50 has a free demo shareware, and it is possible to transfer users’ data from outside devices with a function import from ASCII format. This package also operates with a user-friendly interface that constructs equivalent circuits from different elements, but their selection is limited to parallel/series connections, e.i. bridge schemes not supported by EC-Lab. In addition, the schemes in EC-Lab are constructed using lumped elements, and thus not all immittance phenomena can be taken into account during CNLS processing in this package. To be specific, e.g. it is impossible in EC-Lab add to immittance delay exponent multiplier e^{-i\omega\tau} , which appear, in particular, due to the time offset between current and voltage measurements using multichannel ADC or when a non-ideal cable is used naranjo2024smart . In EC-Lab, users can choose a method of approximation from the five provided, regulate the number of iterations, and even use weights, but only as \mathcal{W}=|Z|^{-}1 . We also found that EC-Lab has performed perfect approximation of model data of RLC circuit, but did not manage to succeed in the case of experimental data, possibly due to the noise and inability to add the mentioned above delay exponent to the model. Another example of frequently used software, which deals with CNLS, is commercially available ZView by Scribner Associates Inc. ZView version 4.0 is partly based on LEVM and has a relatively modern, user-friendly graphical interface, and also provides a wide range of EC choosing ZView_manual . It also includes an instant fit feature, which is likely based on the EC algebraic search method. However, since ZView is provided as a Windows executable file with closed source code, it has lower task flexibility compared to LEVM, source code of which can be modified for ongoing impedance research. In addition, unlike LEVM, ZView 4.0 supports batch processing of spectra, which, however, is implemented just in a pipelined manner, e.g. no refinements are used to

Read the complete text