A general relativistic hydrodynamic simulation code for studying advective, sub-Keplerian accretion flow onto black holes Journal: Astronomy and Computing
Sudip K Garain · 2025
Read A general relativistic hydrodynamic simulation code for studying advective, sub-Keplerian accretion flow onto black holes Journal: Astronomy and Computing by Sudip K Garain (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-01557.txt.
Introduction
Sudip Garain writes a code that mocks gas as it falls onto black holes in full curved-space physics. The flow he chases runs slow, below orbit pace, till spin holds it at a rim. There it can stall, shock, then dive in fast. His 2025 code is built with a sharp shock-catch scheme, so those shock walls stand out clean for study.
Checks pit the code next to known sums and past runs for the same slow flow. Each check the code must pass pre it can be trusted on new cases. The write-up walks through the build step by step. Such flows feed many bright sky sources, so a sound code has wide use. Shock maps from it can be read next to sky data.
Catalog record
| CREATOR | Sudip K Garain |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 39 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2506-01557
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A general relativistic hydrodynamic simulation code for studying advective, sub-Keplerian accretion flow onto black holes Journal: Astronomy and Computing Sudip K Garain Abstract In this paper, we describe a general relativistic hydrodynamics simulation code which is developed to simulate advective accretion flow onto black holes. We are particularly interested in the accretion simulations of sub-Keplerian matter in the close vicinity of black holes. Due to the presence of centrifugal barrier, a nearly free-falling sub-Keplerian accretion flow slows down close to a black hole and can even pass through shocks before accelerating again to the black hole. We design our simulation code using the high resolution shock capturing scheme so that such shock structures can be captured and analyzed for relevance. In this paper, we describe our implementation and validation of the code against a few known analytical and numerical results of sub-Keplerian matter accretion. 1 Introduction In a black hole X-ray binary (BHXRB) system or at the center of a galaxy, usually rotating fluid consisting of mostly plasma is accreted onto a black hole. Strong gravity in the close vicinity of the black hole affects fluid motion in a way that Newtonian potential cannot explain. For example, the effective potential experienced by a rotating particle in the general relativistic calculation shows the presence of a finite height potential barrier in contrast to an infinite barrier as in the calculation using Newtonian gravitational field ( Misner et al. 1973 ; Shapiro and Teukolsky 1983 ) . This barrier is produced by the centrifugal force and the height of this barrier in general relativistic calculation depends on the magnitude of the angular momentum of the particle. Depending on the energy content of the particle, this potential barrier can give rise to a capture orbit or deflect particle away from the black hole or even allow the particle to be accreted by the black hole ( Shapiro and Teukolsky 1983 ) . Though the fluid motion is fundamentally different from a particle motion, such general conclusions derived from particle dynamics also hold for fluid motion. Thus, for the studies of accretion onto black holes, many research groups prefer to solve general relativistic fluid dynamic equations. Over the past 50 years, several numerical simulation codes for solving the time-dependent general relativistic fluid dynamics equations have been developed ( Wilson 1972 ; Hawley et al. 1984 ; Banyuls et al. 1997 ; Del Zanna and Bucciantini 2002 ; Gammie et al. 2003 ; Font 2008 ; Porth et al. 2017 ; Porth et al. 2019 , and references therein) . Many of these simulation frameworks assume the total mass of the accretion disk to be negligible compared to the central accretor so that the space-time metric remains unchanged throughout the simulation. Current practice in the accretion disk simulation community is to use an equilibrium thick disk solution threaded by a seed magnetic field as the initial condition ( Abramowicz and Fragile 2013 ) . This seed magnetic field generates some instability inside the disk so that the equilibrium condition is broken and a significant part of matter starts getting accreted onto the black hole. In contrast to this, one can consider a more realistic set up where the matter comes from, ideally, an infinite distance (e.g, the companion star in the case of BHXRB or ISM in the case of black hole at the center of galaxy) to the accreting black hole. Due to limited computational resources, we of course cannot simulate the entire accretion process. So, we simulate the dynamically important inner part of the disk and rely on the analytical solution for the rest of the part. To simulate such a configuration, one considers the matter to enter the simulation domain through the outer boundary located at a finite distance from the black hole. And, inside the simulation domain, the solution of the time-dependent equations self-consistently determines the flow configuration. Thus, one applies an appropriate inflow boundary condition at the outer boundary and supplies the flow parameters there. These inflow parameters are chosen in such a way that they are consistent with certain analytical solution that extends up to the infinite distance. Several analytical advective accretion solutions are present in literature which connects black horizon with infinite distance (e.g., Bondi accretion solution ( Bondi 1952 ) , slim disk ( Abramowicz et al. 1988 ) , hybrid model flows ( Chakrabarti 1989a ) , ADAF solution ( Narayan and Yi 1994 ) etc.). Therefore, at the outer boundary of the simulation domain one can use the analytically calculated values of flow parameters using such solutions. Simulations of purely radial, Bondi type accretion flow does not produce significant variability. Rather, simulations of quasi-spherical, rotating accretion flow show interesting flow features. Accretion disk simulations with Bondi-type density and radial velocity distribution along with an additional, arbitrary latitude-dependent angular momentum component as the inflow boundary condition have been conducted using non-GR ( Proga and Begelman 2003 ; Janiuk et al. 2008 ; Li et al. 2013 ) as well as GR codes ( Suková et al. 2017 ; Ressler et al. 2021 ; Lalakos et al. 2022 ; Kaaz et al. 2023 ; Cho et al. 2023 ; Olivares et al. 2023 ; Dihingia and Mizuno 2024 ) . We are rather interested in solutions of rotating flows which self-consistently takes the matter rotation into account. Steady state solutions, extending from horizon to infinity, of the rotating fluids with sub-Keplerian angular momentum (at a large distance from a black hole) are present in literature ( Fukue 1987 ; Chakrabarti 1989b ) . The solution shows that the centrifugal barrier can slow down the nearly free fall motion of the flow close to the black hole. This barrier can even force the fluid to pass through shocks before being accreted. These solutions are advective and show significantly high value of radial velocity except near the shock location where the flow is nearly halted. When the angular momentum is set to zero, the solution becomes identical to the standard Bondi accretion solution. Numerical simulations of this flow in the close vicinity of the black holes have resulted in a dynamical flow configuration which can explain several observational features ( Molteni et al. 1994 ; Ryu et al. 1997 ; Chakrabarti et al. 2004 ; Garain et al. 2014 ; Das et al. 2014 ; Lee et al. 2016 ; Patra et al. 2019 ; Debnath et al. 2024 ) . Many of these simulation works are done using pseudo-Newtonian potential proposed in Paczyńsky and Wiita 1980 . This potential reproduces the effective potential around a non-rotating black hole satisfactorily well. However, being non-general relativistic, it has several drawbacks compared to the Schwarzschild spacetime. For example, computations show that the fluid bulk velocity can become super-luminal close to the horizon. Additionally, the effects of space-time dragging due to black hole rotation cannot be investigated. For these reasons, it is beneficial to study such accretion flow using a general relativistic fluid solver in the Kerr background. A few simulation results for this kind of flow with above-mentioned set-up are reported in Kim et al. 2017a ; Kim et al. 2019 . However, further extensions are not reported. In this paper,