Design and Validation of the Digital Receiver System for the next-generation radio interferometer

Donghao Qu, Jiajun Zhang, Yajun Wu, Zhang Zhao, Zixuan Liu, Yanbin Yang · 2025

Read Design and Validation of the Digital Receiver System for the next-generation radio interferometer by Donghao Qu, Jiajun Zhang, Yajun Wu, Zhang Zhao, Zixuan Liu, Yanbin Yang (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2506-00464.txt.

Introduction

Donghao Qu and five co-authors design and test a digital receiver for a new radio telescope array. Their paper, from twenty twenty-five, describes the unit's build. It takes eight analog inputs and samples them at very high speed and depth. On-board chips split the signal into channels in real time.

Field tests pointed the system at the Sun, a satellite beacon, and a supernova remnant. The team studied the fringe patterns that prove the array works as one. Signal delays were fixed two ways, by math and by a fitted curve. Both agreed to under a billionth of a second. The unit suits planned telescopes, one of them in Brazil.

Catalog record

CREATORDonghao Qu, Jiajun Zhang, Yajun Wu, Zhang Zhao, Zixuan Liu, Yanbin Yang
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE27 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2506-00464

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Design and Validation of the Digital Receiver System for the next-generation radio interferometer Donghao Qu, Jiajun Zhang, Yajun Wu, Zhang Zhao, Zixuan Liu, Yanbin Yang Abstract This paper presents the design and validation of a digital receiver system developed for the next-generation radio interferometer projects. The receiver supports 8 analog inputs with 12-bit, 4GHz sampling and performs real-time signal processing using FPGA-based channelization. Field experiments were conducted to observe the Sun, a satellite beacon, and Cassiopeia A. Interference fringes were analyzed and modeled. Time delay compensation was implemented in two ways: theoretical calculation and Gaussian Process Regression (GPR) fitting. Results show sub-nanosecond consistency between the two methods. The field experiments demonstrate the receiver’s suitability for future radio telescopes such as the BINGO-ABDUS project. \volnopage Vol.0 (20xx) No.0, 000–000 \vs \no Received 20xx month day; accepted 20xx month day keywords radio astronomy, radio interferometry, digital receiver 1 Introduction Radio interferometry has become an essential technique in modern radio astronomy, allowing arrays of spatially separated antennas to synthesize a virtual telescope with high angular resolution ( Thompson et al. 2017 ) . By measuring the time delays and correlated signals between antenna pairs, interferometers can reconstruct fine-scale astronomical structures and conduct high-precision sky surveys. Prominent examples of radio interferometers include the LOFAR(Low Frequency Array) ( van Haarlem et al. 2013 ) , operating at low frequencies to study cosmic dawn and ionospheric effects; the Murchison Widefield Array (MWA) ( Whitney et al. 2011 ) , optimized for widefield observations of the southern sky; CHIME(Canadian Hydrogen Intensity Mapping Experiment) ( Bandura et al. 2014 ) , designed for 21-cm intensity mapping to detect baryon acoustic oscillations; and the upcoming SKA ( Garrett et al. 2010 ) , which aims to be the most sensitive radio interferometer ever built. In China, the Tianlai project is advancing cosmological studies ( Wu et al. 2021 ) . The BINGO-ABDUS project located in Brazil, is advancing intensity mapping and cosmology studies using hybrid or phased array technologies ( Abdalla et al. 2022 ) . The performance of a radio interferometric array is closely linked to the backend digital processing system. In recent years, reconfigurable FPGA-based digital receiver platforms such as ROACH2 (Reconfigurable Open Architecture Computing Hardware) ( Wang et al. 2024 ) and SKARAB (SKA Reconfigurable Application Board) ( Melis et al. 2024 ) have been widely adopted in large-scale radio telescope projects. The digital backend system of QTT is implemented using a hybrid architecture that combines Field-Programmable Gate Arrays (FPGAs) with CPUs and GPUs ( Zhang et al. 2024 ) . These systems support high-speed analog-to-digital conversion (ADC), real-time channelization, and flexible data transmission, making them suitable for wideband and multi-element interferometry. A key challenge in interferometric systems is the compensation of geometric and instrumental time delays between antennas. These delays arise due to differences in signal propagation paths and electronic components. If uncorrected, they cause phase decoherence, distorted fringes, and loss of sensitivity. Therefore, accurate delay estimation and compensation—both integer and sub-sample level—is critical to achieve optimal fringe contrast and dynamic range. Among the advanced techniques, Gaussian Process Regression (GPR) has shown promise in robustly fitting phase-frequency relationships for delay estimation in noisy or RFI-contaminated environments ( SEEGER 2004 ; Mukangango et al. 2024 ) . In Sec. 2 , we present the design and specification of a high-speed digital receiver system tailored for radio interferometric applications, in particular for the BINGO/ABDUS phased array experiment. In Sec. 3 , we present the observations we have conducted for validating the digital receiver. In Sec. 4 , we demonstrate delay compensation using both geometric modeling and signal-based estimation (via cross-correlation and GPR), and validate the performance through field tests involving observations of celestial and artificial sources. We conclude and discuss in Sec. 5 . The system architecture and compensation pipeline developed here provide a scalable solution for future interferometric arrays. 2 Background 2.1 BINGO-ABDUS To expand BINGO’s scientific capabilities, the BINGO-ABDUS has been proposed. ABDUS will enhance the original BINGO design by integrating phased array detectors and outrigger stations ( Abdalla et al. 2023 ) , significantly increasing the number of beams from 28 up to 200 through multibeam electronic synthesis. This upgrade will enable broader sky coverage, reaching up to 50% of the sky with resolutions between 27’ and 40’, and extend redshift coverage up to z\approx 2.1 . The use of phased arrays will not only improve survey speed and sensitivity but also enhance RFI(Radio Frequency Interference) mitigation, localization of transient sources, and overall data quality. The ABDUS project envisions the deployment of Vivaldi Aperture Array Outrigger Stations (VAAOS) ( Motta et al. 2024 ) , located approximately 20 km from the main BINGO dish. These stations, composed of dense, connected arrays of tiles, are optimized for wideband operation (0.5–1.5 GHz) and high angular resolution through interferometric techniques. In support of the BINGO-ABDUS project’s technical requirements, we conducted receiver tests focusing on signal correlation, time delay compensation, and fringe analysis. These tests verify the system’s performance under simulated observation conditions and ensure readiness for the phased array and outrigger implementations. Our experimental work provides critical validation for the upcoming BINGO-ABDUS deployments, especially in the areas of beamforming accuracy, time delay calibration, and interference fringe detection essential for high-precision cosmological and transient radio observations ( Law et al. 2018 ) . 2.2 BINGO interferometry system To enhance the capabilities of the BINGO telescope for transient science, particularly the detection and localization of Fast Radio Bursts (FRBs), the BINGO Interferometry System (BIS) has been proposed. BIS augments the single-dish BINGO setup with a set of auxiliary outrigger antennas—smaller, single-horn radio telescopes optionally equipped with mirrors of varying sizes (4 m, 5 m, or 6 m). These outriggers, placed at distances of 10–40 km from the main BINGO dish, enable interferometric observations by forming baselines between pairs of telescopes. By performing cross-correlations, BIS achieves arcsecond-scale localization of FRB events ( Petroff et al. 2019 ) . The BIS concept was quantitatively evaluated through the development of a simulation framework named FRBlip , which generates cosmological mock FRB catalogs and models detection and localization capabilities. Simulation results indicate that a BIS configuration with 9 outriggers (each with a 6 m mirror) can localize over 20 FRBs per year, primarily in the redshift range z\lesssim 1 . Wider beam outriggers increase the chances of multi-baseline detections, enhancing localization efficiency, while larger mirrors provide better sensitivity but narrower sky coverage. The BIS, therefore, represents a significant extension of BINGO’s scientific reach, enabling joint studies of cosmology and radio transients using interferometric techniques ( dos Santos, Marcelo V. et al. 2024 ) . 2.3 digital receiver To meet the requirements of next-generation radio telescopes like BINGO-ABDUS, the digital receiver needs to have low latency, wide band, high time resolution, and a large number of channels. We have used the RFSoC system, based on Xilinx FPGA development board, to make up the digital receiver. The specifications are listed in Tab. 1 . The photograph of the digital receiver is shown in Fig. 1 . We give it the name ”DH1”. About the digital receiver, the 8-channel ADCs operate simultaneously at a sampling rate of 4096 MHz with a sampling bandwidth of 2048 MHz.

Read the complete text