CROSS-MODAL CHARACTERIZATION OF THIN FILM MoS 2 \text{MoS}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} USING GENERATIVE MODELS

Isaiah A. Moses, Chen Chen, Joan M. Redwing, Wesley F. Reinhart · 2025

Read CROSS-MODAL CHARACTERIZATION OF THIN FILM MoS 2 \text{MoS}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} USING GENERATIVE MODELS by Isaiah A. Moses, Chen Chen, Joan M. Redwing, Wesley F. Reinhart (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-24065.txt.

Introduction

Isaiah Moses, Chen Chen, Joan Redwing, and Wesley Reinhart teach generative models to translate between ways to measure a two-dimensional material. Thin films of molybdenum disulfide need a set of tools to characterize them. Expert time is the bottleneck when growth is tuned. Each tool, though, sees the same sample in its own way.

The team asked if quantitative metrics that are most often taken from atomic force microscopy could be predicted from Raman spectroscopy alone. Their generative models also learned to synthesize full Raman and photoluminescence spectra from each other and from microscope images. The results were promising enough to serve as a foundation guide. The wider pitch is cheaper, faster discovery of materials through cross-modal prediction.

Catalog record

CREATORIsaiah A. Moses, Chen Chen, Joan M. Redwing, Wesley F. Reinhart
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE54 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-24065

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

CROSS-MODAL CHARACTERIZATION OF THIN FILM MoS 2 \text{MoS}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} USING GENERATIVE MODELS Isaiah A. Moses, Chen Chen, Joan M. Redwing, Wesley F. Reinhart Abstract The growth and characterization of materials using empirical optimization typically requires a significant amount of expert time, experience, and resources. Several complementary characterization methods are routinely performed to determine the quality and properties of a grown sample. Machine learning (ML) can support the conventional approaches by using historical data to guide and provide speed and efficiency to the growth and characterization of materials. Specifically, ML can provide quantitative information from characterization data that is typically obtained from a different modality. In this study, we investigated the feasibility of projecting quantitative metrics from microscopy measurements, such as atomic force microscopy (AFM), using data obtained from spectroscopy measurements, like Raman spectroscopy. Generative models were also trained to generate the full and specific features of the Raman and photoluminescence spectra from each other and the AFM images of the thin film MoS 2 \text{MoS}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} . The results are promising and have provided a foundational guide for the use of ML for the cross-modal characterization of materials for their accelerated, efficient, and cost-effective discovery. † † affiliation: Materials Research Institute, The Pennsylvania State University, University Park, PA 16802 † † email: [email protected] † † affiliation: Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802 † † affiliation: Institute for Computational and Data Sciences, The Pennsylvania State University, University Park, PA 16802 Keywords: Raman Spectroscopy, Photoluminescence, Atomic Force Microscopy, Cross-Modal Learning, Autoencoder, Thin Film \text{MoS}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} 1. Introduction The properties and qualities of grown materials are typically determined by extracting information related to different aspects of the materials, including chemical, structural, and morphological properties. The need for this varied information implies the requirement to use several characterization modalities and instruments. Li et al. (2016) Each characterization method gives information generally related to a specific aspect of the materials. For instance, in Raman spectroscopy, measurement involves the interaction of laser light with the molecular vibrations of materials to provide chemical and structural information. Mulvaney and Keating (2000) ; Orlando et al. (2021) On the other hand, atomic force microscopy (AFM) measurements use a physical probe with a nanoscale tip to measure surface morphology and mechanical properties through force interactions with the sample. Rugar and Hansma (1990) ; Giessibl (2003) ; Zhang et al. (2018) These measurements are routinely taken in the epitaxial growth of materials such as thin-film transition-metal dichalcogenides (TMDs). Hong et al. (2021) TMDs such as \text{MoS}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} are currently receiving significant attention due to their potential applications in various technologies. Wu et al. (2024) ; Shahbaz et al. (2024) ; Ahmed et al. (2024) . Other applications include biosensors, Lai et al. (2025) synaptic transistors, Guo et al. (2025) and neuromorphic computing. Liu et al. (2025) A standard bottom-up growth method for preparing \text{MoS}{\vphantom{\text{X}}}_{\vphantom{\text{2}}\smash[t]{\text{2}}}^{\vphantom{\smash[t]{\text{2}}}\hphantom{\text{2}}\text{}} is metal-organic chemical deposition (MOCVD). This synthesis method is usually accompanied by several characterization methods, including Raman spectroscopy, photoluminescence (PL), and AFM. Chen et al. (2024) The characteristic bands of Raman spectra include \mathrm{E^{1}_{2g}} , \mathrm{A_{1g}} , and \mathrm{2LA(M)} at about 385, 407, and 460 cm -1 frequency, respectively. \mathrm{E^{1}_{2g}} and \mathrm{A_{1g}} are due to vibrations in-plane and out-of-plane, respectively, while \mathrm{2LA(M)} is associated with longitudinal acoustic phonon. Li et al. (2012) ; Hong et al. (2021) ; Liang et al. (2018) ; Yan et al. (2014) ; Lee et al. (2010) . However, the frequencies and features of these bands vary, for example, with the number of layers and strain in the sample. Lee et al. (2010) As the number of layers increases, the two bands move apart due to interlayer vibrations. In contrast, \mathrm{E^{1}_{2g}} is blue-shifted (moves toward larger frequency), while \mathrm{A_{1g}} is red-shifted (moves toward smaller frequency) as it becomes a monolayer, with a band split of about 19 cm -1 for monolayer reported. Li et al. (2012) ; Catalán-Gómez et al. (2019) Other factors affecting the frequency of the bands are the sample temperature and the laser power. Yan et al. (2014) ; Golovynskyi et al. (2020) Similarly, the width and the position of the peak in PL provide information related to the crystal quality, defects, and the number of layers. For instance, a narrower peak indicates better crystal quality and fewer defects. Zhang et al. (2017) Also, a monolayer normally has a strong photoluminescence emission at room temperature, with the peak around 1.9 eV. As the film thickness increases from the monolayer to multilayer, the band structure transitions from the direct to the indirect band gap, resulting in the quenching of the intensity. Chen et al. (2024) In contrast to PL, AFM measurement gives morphological features of the sample’s surface. Features that are often determined from the AFM images include surface coverage, grain sizes and density, and roughness of the sample. Eichfeld et al. (2015) ; Kandybka et al. (2024) ; Moses et al. (2024) Importantly, aside from using different instrumentation and acquiring different information about the samples, these measurements have substantially different latencies. While Raman and PL measurements can be conducted in the synthesis environment, samples are typically transferred to a separate facility for microscopy measurements. Furthermore, microscopy measurements generally require a longer duration to complete (as described in the Methods). Additionally, AFM uses tips that become worn out with use, whereas Raman does not require such spare parts. Notably, while the spectroscopy data used in this study are collected at room temperature after the synthesis is complete, in situ spectroscopy measurements are often performed Yoo et al. (2023) and have also been reported during MOCVD growth. Xue et al. (2020) These differences have important implications for the future of process control and measurement throughput in an increasingly data-driven scientific ecosystem. In this study, we investigate the deployment of machine learning (ML) to infer information between these measurement modalities. Specifically, we evaluate the ability of spectroscopy to provide quantitative data that is typically obtained through microscopy, and vice versa. The advantages of this approach could substantially accelerate the discovery of new materials, for instance, in determining optimal growth parameters and eliminating the need for various types of equipment for different characterization methods. Additionally, it would enable a faster estimation of material properties, thereby offering the essential information needed to optimize growth parameters effectively. Cross-modal learning is a branch of ML that uses information from one modality to estimate data from another modality. Classical examples of cross-modal learning include deep learning approaches deployed in text-to-speech systems. Kumar et al. (2023) In materials and chemical sciences, several studies have deployed cross-modal learning for accelerated materials discovery and characterization. These include the prediction of molecular structure from the Nuclear Magnetic Resonance (NMR) spectra, Hu et al. (2024) Infrared Spectra, Wu et al. (2025) ; Alberts et al. (2024) , and mass spectra. Litsa et al. (2023) ; Stravs et al. (2022) These studies have mainly used autoencoder and transformer-based models to elucidate molecular structures from spectra data. Others have used multi-modal chemical descriptors to train an autoencoder model for the prediction of spectra and structural descriptors, Yang et al. (2024) the prediction of AFM topography from the optical microscope images using autoencoder models, Jeong et al. (2023) and the variational

Read the complete text