Diffraction-phase-free Bragg atom interferometry
Víctor José Martínez-Lahuerta, Jan-Niclas Kirsten-Siemß, Klemens Hammerer, Naceur Gaaloul · 2025
Read Diffraction-phase-free Bragg atom interferometry by Víctor José Martínez-Lahuerta, Jan-Niclas Kirsten-Siemß, Klemens Hammerer, Naceur Gaaloul (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-23921.txt.
Introduction
Víctor Martínez-Lahuerta and co-authors scrub a stubborn error out of atom interferometers, ultra-precise sensors built on matter waves, in a 2025 paper. These devices split atoms with Bragg diffraction, which inherently opens several paths at once. The stray paths imprint a diffraction phase that corrupts the reading. Optimal control theory had already hardened the devices against vibration and acceleration.
Here the same control tools target the phase itself. In a realistic model with a warm incoming wavepacket, the method pushed the phase below a microradian for slow atoms. That erases one of the leading systematic errors in the field. The authors say metrology-grade interferometers gain accuracy without new hardware.
Catalog record
| CREATOR | Víctor José Martínez-Lahuerta, Jan-Niclas Kirsten-Siemß, Klemens Hammerer, Naceur Gaaloul |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 56 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-23921
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Diffraction-phase-free Bragg atom interferometry Víctor José Martínez-Lahuerta, Jan-Niclas Kirsten-Siemß, Klemens Hammerer, Naceur Gaaloul Abstract Bragg Diffraction of matter waves is an established technique used in the most accurate quantum sensors. It is also the method of choice to operate large-momentum-transfer, high-sensitivity atom interferometers. It suffers, however, from an intrinsic multi-path character. Optimal control theory (OCT) has recently led to an improved robustness of atom interferometers to a range of challenging environmental effects such as vibrations or platform accelerations. In this theoretical work, we apply OCT protocols to control the Bragg diffraction phase shifts thereby enhancing the metrological accuracy of the interferometer. We show a minimization of the diffraction phase for realistic conditions of finite temperature of the incoming wavepacket in a multi-path, high-order Bragg interferometer in a Mach-Zehnder configuration. We study input states with different momentum widths and find that our approach mitigates diffraction phases below the microradian level in the case of 1 % 1\% of the photon recoil, thereby eliminating one of the leading systematic effects in atom interferometry. I Introduction Quantum sensors [ 1 ] possess a great sensitivity in probing small potential effects. They detect a great range of physical quantities such as magnetic and electric fields, time and frequency, acceleration and rotations, or temperature and pressure. To date, atom interferometers provide the most precise determination of the fine-structure constant [ 2 , 3 ] , as well as the most accurate quantum test of the universality of free fall [ 4 ] , by exploiting the interference of matter waves. Moreover, these sensors allow for absolute measurements of inertial forces with high accuracy and precision [ 5 ] , making them ideally suited for practical applications [ 6 ] such as gravimetry [ 7 , 8 ] , gravity cartography [ 9 ] , and inertial navigation [ 10 , 11 ] . Great efforts are being made to dramatically increase the performance of state-of-the-art atom interferometers. On the one hand, this will aid in timely fundamental Physics quests such as the detection of gravitational waves or the probe for elusive phenomena such as dark matter and dark energy [ 12 ] . On the other hand, active efforts are made to deploy real-world quantum sensors, e.g., through reduced integration times or more compact designs maintaining high sensitivity [ 6 ] . This has been shown by pioneering experiments in the group of Ernst Rasel [ 13 , 14 , 15 ] . Bragg diffraction [ 16 , 17 ] is one of the primary techniques used to enhance the sensitivity of atom interferometers through large momentum transfer [ 4 , 18 , 19 , 2 ] . Bragg pulses impart multiple photon recoils onto atoms while the atom remains in its electronic ground state, allowing for state-of-the-art momentum separations [ 20 , 21 , 14 , 22 , 23 ] . These pulses typically operate in the quasi-Bragg regime [ 24 ] to balance scattering losses to parasitic states with the relatively strong velocity selectivity of the diffraction process [ 25 ] . This compromise arises because Bragg scattering extends beyond a simple two-level system due to the relatively small energy splitting of the involved momentum states [ 24 , 26 ] . As a result, the multi-path interference signal of a Bragg interferometer can deviate significantly from that of an idealized two-mode interferometer, especially for higher diffraction orders [ 27 , 28 ] . These intrinsic multi-port and multi-path properties of Bragg interferometers cause diffraction phase shifts, which represent an important source of systematic errors [ 29 , 28 , 30 , 21 , 31 , 32 ] . Recently, adapting the mirror pulse timing in the MZ configuration to reduce the populations of the parasitic paths was theoretically proposed [ 29 ] and experimentally verified [ 33 ] . While this method has the potential to significantly suppress the diffraction phase in some geometries such as the MZ interferometer, its effectiveness appears limited when multiple parasitic diffraction orders are significantly populated, leaving the phase estimation of multi-port Bragg interferometers an open problem. In this article, we use Optimal Control Theory (OCT) to engineer composite beam splitter (BS) and mirror (M) pulses that suppress the systematic phase shifts caused by the diffraction process to a high level. The effectiveness of using time-dependent interactions to maintain coherent control of complex quantum dynamics with high precision is well-known and has applications in quantum simulations, computation, and metrology [ 34 ] . Such techniques include shaped pulses [ 35 , 36 , 37 ] , rapid adiabatic pulses [ 38 , 39 , 40 ] , composite pulses [ 41 , 42 , 43 , 44 ] , or continuous periodic fields [ 45 , 46 , 47 , 48 ] all of which use time-dependent interactions to reproduce the equivalent of a robust single pulse. In the context of Bragg interferometry, the OCT has been shown to improve the diffraction efficiency and interferometer contrast of Bragg interferometers [ 49 , 50 , 51 , 52 , 53 ] . Here, we demonstrate the utility of OCT-engineered atom-light Bragg diffraction pulses in the metrology context by keeping the diffraction phase well below the mrad-level for a high-order Bragg interferometry scheme. Using the OCT to manipulate the Rabi frequency, phase, and detuning of these pulses, we mitigate the emergence of parasitic paths to ideally restore Bragg interferometry back to a two-mode operation. Thus, we extend the use of OCT techniques by showcasing its capability to drive high-order Bragg transitions at vanishing diffraction phase, thereby advancing the practical applications of large-momentum-transfer atom interferometers. In section II , we introduce the effective multilevel Bragg Hamiltonian and discuss the experimentally relevant control parameters. We consider the diffraction of atomic states that feature a finite velocity distribution to account for Doppler effects. In section III , we describe the OCT method and cost functions used to optimize the atom-light interaction. In section IV.1 , we assess the performance of individual pulses by comparing them to the unitary operations that would realize a two-mode MZ interferometer. We consider Bragg orders n=3,5 which are readily achievable in experiments in terms of laser power requirements and spontaneous emission [ 26 , 24 ] . In section IV.2 , we highlight the improved results using OCT pulses as contrasted to the more conventional pulses with Gaussian temporal shapes. In section V , we quantify the control of the diffraction phase in the MZ interferometers realized with OCT pulses. Finally, we summarize the findings of our study in section VI . Figure 1: a) Multi-path nature of Bragg atom interferometer for a MZ interferometer, showing an n th-order Bragg beam splitter populating the main trajectories (solid black lines), open ports, and parasitic paths (dashed lines; the dominant ones for n=5 are thicker), all affecting the Mach-Zehnder (MZ) signal recorded in ports a and b. Fig. adapted from [ 29 ] . b) MZ signal phase scan of the population in port a ( P_{a} ) by scanning over the relative phase \Phi_{\mathrm{L}} of the final beam splitter. The red lines represent the extraction of the mid-fringes by solving P_{a}(\Phi)=0.5 , where P_{a}(\Phi_{\mathrm{L}}) is the fitted two-mode