Record-high-Q AMTIR-1 microresonators for mid- to long-wave infrared nonlinear photonics

Liu Yang, Ryo Sugano, Ryomei Takabayashi, Hidetoshi Kanzawa, Hajime Kumazaki, Yongyong Zhuang, Xiaoyong Wei, Takasumi Tanabe, Shun Fujii · 2025

Read Record-high-Q AMTIR-1 microresonators for mid- to long-wave infrared nonlinear photonics by Liu Yang, Ryo Sugano, Ryomei Takabayashi, Hidetoshi Kanzawa, Hajime Kumazaki, Yongyong Zhuang, Xiaoyong Wei, Takasumi Tanabe, Shun Fujii (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-23362.txt.

Introduction

Liu Yang and eight co-authors report a 2025 optics paper on a tiny ring device made of AMTIR-1 glass. The glass passes infrared light well and stands up to heat, so it suits thermal imaging. Their ring, a few millimeters wide, traps light in a whispering gallery mode that hugs the rim.

The device reached a quality factor far above past values for this glass, by almost a hundredfold. The team also mapped its heat traits and found that low heat flow helps tune the ring. Near a key infrared band, the glass shows traits that favor nonlinear light effects. Such rings could support small frequency combs and other tools for heat-based sensing.

Catalog record

CREATORLiu Yang, Ryo Sugano, Ryomei Takabayashi, Hidetoshi Kanzawa, Hajime Kumazaki, Yongyong Zhuang, Xiaoyong Wei, Takasumi Tanabe, Shun Fujii
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-23362

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Record-high-Q AMTIR-1 microresonators for mid- to long-wave infrared nonlinear photonics Liu Yang, Ryo Sugano, Ryomei Takabayashi, Hidetoshi Kanzawa, Hajime Kumazaki, Yongyong Zhuang, Xiaoyong Wei, Takasumi Tanabe, Shun Fujii Abstract AMTIR-1 chalcogenide glass has shown its potential for use in thermal imaging systems owing to its low refractive index, thermal resistance and high transparency across the infrared wavelength regime. Here we report a millimeter-scale high-Q whispering gallery mode microresonator made of AMTIR-1. The recorded Q-factor has reached 1.2 × 10 7 1.2\times 10^{7} at 1550 nm, which is almost two-orders of magnitude higher than previously reported values. We characterize the thermal properties, where low thermal conductivity plays an important role in thermal resonance tuning. We further show that AMTIR-1 resonators support anomalous dispersion as well as a low absorption coefficient near the 7 µm wavelength band, thus offering the possibility of providing suitable platforms for mid-infrared, long-wave infrared nonlinear optics including microresonator frequency comb generation. High-quality (Q) factor whispering gallery mode (WGM) microresonators have been utilized as attractive platforms for studying nonlinear and quantum optics since the high-Q properties and large nonlinear coefficients enable various nonlinear optical effects such as four-wave mixing (FWM), harmonic generation, and stimulated Raman scattering, at very low pump powers [ 1 , 2 , 3 ] . In particular, optical parametric oscillation based on the FWM process allows the generation of quantum squeezing states and coherent frequency combs from a continuous-wave input, leading to intriguing practical applications such as secure quantum communications [ 4 , 5 ] , and gas and molecular spectroscopy [ 6 , 7 ] in miniature devices. Frequency comb generation in the infrared region is especially attractive as it permits access to the molecular absorption region, where there are vibrational absorption signatures for many chemical species. In fact, combs with a large line spacing and a very broad span are required for efficient vibrational spectroscopy [ 8 , 9 ] . Despite such a luminous landscape, few microresonator-based applications in the mid-infrared and long-wave infrared regimes have been developed due to the lack of high-Q resonator platforms that have both ultra-low loss properties and suitable dispersion profiles, both of which are essential for nonlinear processes. Although there have been several demonstrations of microresonator frequency comb generation in silicon nitride ( \mathrm{Si_{3}N_{4}} ) [ 10 , 11 ] , silicon (Si) [ 12 , 13 ] , and fluoride crystals [ 14 , 15 , 16 ] in the mid-infrared region, with these platforms it is difficult to extend the wavelength beyond 6 µm because of strong material absorption and the limitations of dispersion engineering. This fact poses a challenge as regards direct access to the fingerprint region, i.e., 6.7-20 µm ( 1500-500~\mathrm{cm^{-1}} ), where each molecule exhibits a unique absorption pattern in contrast to the functional group region, i.e., 2.5-6.7 µm. AMTIR-1 ( \mathrm{Ge_{33}As_{12}Se_{55}} ), a chalcogenide glass, is a material that is widely used for infrared optical components thanks to its various desirable properties in the infrared regime including a wide transmission window ( \sim 0.75–14 µm), a low two-photon absorption coefficient, a low refractive index ( n\sim 2.45-2.5 ) and a high optical nonlinearity ( n_{2}=10^{-17}-10^{-18}~\mathrm{m^{2}/W} ) [ 17 , 18 , 19 ] . In particular, the nonlinear refractive index n_{2} is two or three orders of magnitude higher than that of fluoride crystals and silica glass [ 17 ] . The photosensitivity is also a unique property of this material, and has been exploited for a wide variety of applications [ 19 , 20 , 21 , 22 ] . Although there have been several studies on AMTIR-1 microcavities over the past two decades [ 18 , 19 , 20 , 21 , 22 , 23 ] , the high nonlinearity and low absorption coefficients remain largely unexplored for nonlinear photonic applications. Meanwhile, the reported Q-factors are limited to moderate values ( \sim 10^{5} ), which may have caused us to overlook the potential of this material. In this work, we propose a monolithic AMTIR-1 WGM microresonator as a desirable platform for nonlinear applications in the mid-infrared and long-wave infrared regions. We report the experimental observation of a high Q value of 1.2\times 10^{7} at 1550 nm, which is almost two orders of magnitude higher than that of previously reported microcavities made of AMTIR-1. The thermal properties of AMTIR-1 resonators are determined experimentally, and the results are consistent with numerical simulations that take account of thermal conduction coefficients. We show that the dispersion profile of AMTIR-1 resonators allows broadband frequency comb generation above 7 µm, thus revealing its great potential as a coherent light source in the molecular fingerprint region. The experimental setup for a Q-factor measurement is shown schematically in Fig. 1 (a). A microresonator is fabricated from a commercially available optical grade AMTIR-1 window with a thickness of 3 mm by manual shaping and surface polishing [Fig. 1 (b)]. The details of the fabrication procedure is presented in Supplement 1. The resonator has a free-spectral range (FSR) of 9.7 GHz, with a diameter of \sim 3.9 mm. A wavelength tunable, narrow-linewidth ( \sim 200 kHz) laser (Santec, TSL-570) operating in the C-band wavelength range is utilized to measure the transmission spectrum of the AMTIR-1 resonator, where a polarization controller is used to adjust the polarization of the input light. The resonator is mounted on a 3D translation stage with 20 nm resolution (Thorlabs, MAX312D/M) for precise coupling control. Given the refractive index of AMTIR-1 ( n\sim 2.545 at 1550 nm), a right-angle rutile prism (Thorlabs, ADT-6) is used to obtain efficient coupling as shown in Fig. 1 (c). A HeNe laser is incorporated to provide a reference optical path for alignment. The transmitted light is collected by a photodetector (Thorlabs, PDA10CS2) and recorded with a digital sampling oscilloscope. Figure 1: (a) Schematic diagram of the experimental setup. (b) Photograph of an AMTIR-1 microresonator. (c) Sideview of the prism coupling system, where the resonator temperature is controlled with a thermoelectric cooler. A series of WGMs are excited when evanescent light coupling is achieved by the careful adjustment of the coupling location. It should be noted that we only observed TE modes because the phase-matching condition can be met for the cavity modes and the extraordinary refractive index of the rutile prism ( n_{e}=2.691 ). Figure 2 (a) shows a typical transmission spectrum. Higher-order transverse modes are observed within the 1-FSR. Among the many observed modes, we select one representative mode to evaluate the Q-factor (See also Supplement 1 for details). Lorentzian fitting of its spectrum yielded a full width at half maximum (FWHM) of 16.1 MHz, corresponding to a loaded Q of 1.2\times 10^{7} (Fig. 2 (b)). The frequency axis is calibrated with the reference signal of a fiber-based Mach-Zehnder interferometer [ 24 ] . We note that the recorded Q, which exceeds 10 million in the telecom band, is the highest value observed in microcavities made of AMTIR-1 among the previously reported values for a microdisk ( Q=1.2\times 10^{5} ) [ 19 ] and a photonic crystal ( Q=1.25\times 10^{5} ) [ 21 ] . Figure 3 summarizes the absorption-limited Q-factor and corresponding absorption coefficient with experimentally reported Q-factors of AMTIR-1 microcavities. According to the absorption

Read the complete text