Nosey: Open-source hardware for acoustic nasalance

Maya, Jack, Justin J. H, Roy, Sam · 2025

Read Nosey: Open-source hardware for acoustic nasalance by Maya, Jack, Justin J. H, Roy, Sam (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-23339.txt.

Introduction

Maya Dewhurst and co-authors introduce Nosey in a 2025 paper, an open-source device that measures nasalance, the nasal share of speech sound. Standard nasalance gear is costly and closed, which limits speech labs.

Nosey is a low-cost, 3D-printed system whose plans are free online. Tests against a commercial device show Nosey reads a bit higher overall. The size of gaps between sound settings matched well across both systems. The team also trials microphone swaps and build materials to guide custom builds. Speech researchers get a flexible, cheap stand-in for commercial gear, plus notes on how to use it well in data collection.

Catalog record

CREATORMaya, Jack, Justin J. H, Roy, Sam
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE18 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-23339

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Nosey: Open-source hardware for acoustic nasalance Maya, Jack, Justin J. H, Roy, Sam Abstract We introduce Nosey (Nasalance Open Source Estimation sYstem), a low-cost, customizable, 3D-printed system for recording acoustic nasalance data that we have made available as open-source hardware (http://github.com/phoneticslab/nosey). We first outline the motivations and design principles behind our hardware nasalance system, and then present a comparison between Nosey and a commercial nasalance device. Nosey shows consistently higher nasalance scores than the commercial device, but the magnitude of contrast between phonological environments is comparable between systems. We also review ways of customizing the hardware to facilitate testing, such as comparison of microphones and different construction materials. We conclude that Nosey is a flexible and cost-effective alternative to commercial nasometry devices and propose some methodological considerations for its use in data collection. Dewhurst Collins Lo Alderton Kirkham Lancaster UniversityUnited Kingdom City St George’s, University of LondonUnited Kingdom keywords nasalance, nasality, acoustics, measurement, hardware, phonetics, speech production † † email: {m.dewhurst1}{j.h.lo}{s.kirkham}@lancaster.ac.uk, [email protected] 1 Introduction Nasality is an integral part of human speech that underpins many important questions in phonetics and phonology [ 1 , 2 ] . Achieved by velum lowering, nasality can spread from phonologically nasal segments to nearby oral segments via coarticulation in language-, dialect- and speaker-specific ways [ 3 , 4 , 5 , 6 ] . Such variation in coarticulation has been said to be a key driver of sound change in the development of nasal vowels [ 7 ] . Beyond the segmental level, nasality and denasality as voice qualities have been known to attract social evaluation [ 8 , 9 , 10 ] . In clinical settings, atypical displays of nasality play a role in the diagnosis of speech and language disorders [ 11 , 12 ] . Addressing these issues depends on the ability to reliably measure nasality and compare nasality between speakers. Neither, however, has proven straightforward. Acoustic correlates of nasality in vowels, for example, include A1–P0, F1 bandwidth and spectral tilt [ 13 ] . Even the relatively robust A1–P0 can fail, especially for high vowels, when the harmonics associated with both the oral formant and the nasal pole coincide [ 14 ] . Baseline and range variation in these acoustic features also adds to the challenge of comparing their values across speakers [ 13 ] . An alternative means of investigating (vowel) nasality, long established in the clinical domain and recently gaining popularity in phonetic research, is nasometry. Rather than inferring nasality from spectral characteristics, this method relies on isolating acoustic radiations from the nasal and oral cavities and capturing them using separate microphones. The most common measure used to quantify the output from nasometry is nasalance, which is the ratio between the recorded nasal sound pressure level and the total oral and nasal sound pressure levels [ 15 ] . A typical calculation of nasalance is \text{Nasalance}=\frac{A_{n}}{A_{n}+A_{o}}\cdot 100 (1) where A_{n} and A_{o} represent acoustic energy captured by the nasal and oral microphones respectively, with the ratio scaled to a percentage value. Nasalance can reliably separate phonologically oral and nasal vowels, and has been used in various phonetic studies of nasality and nasal coarticulation for this purpose (e.g. [ 16 , 17 ] ). In the clinical realm, normative values of nasalance are typically developed from read materials with varying proportions of nasal sounds, in order to infer and diagnose atypical patterns of nasal airflow (e.g. [ 18 , 19 ] ). 1.1 Recording nasalance data At present, nasometry is typically carried out using commercially available devices. While differing in specific design, existing systems share the common premise of mounting two microphones on either side of an acoustic baffle that is positioned between the nose and the mouth. Systems typically also incorporate microphone pre-amplification and analog-to-digital conversion. Comparisons of nasalance systems have shown a high degree of agreement across different commercial hardware solutions [ 20 , 21 ] . While these offer a user-friendly solution to nasalance data collection, they suffer from a number of drawbacks, such as lack of customizability, a frequent inability to conduct additional analog-domain signal processing, and their relatively high cost, especially for multi-fieldworker contexts where many devices are required. In the face of these challenges, the ‘earbuds’ method has emerged as a cheap and highly accessible alternative to traditional nasometry. This involves placing one earbud from a pair of earphones below the nostril and the other earbud outside the mouth [ 22 ] . The earbuds can be plugged into a microphone jack, and when incoming sound passes through the speaker coil, it generates a magnetic force that moves the diaphragm (analogous to how a microphone works). The recordings produced tend to be of limited quality, and subsequent evaluation has shown that they are adequate for broad comparisons of average nasality, but are substantially less fine-grained than commercial nasometers at capturing smaller systematic differences [ 23 ] . We address these issues here by reporting the design and assessment of open-source, 3D-printable hardware for collecting acoustic nasalance data. We note that our system does not aim to fully replace the functionality of commercial nasometers, which may have additional data collection, signal processing and data analysis tools, and also provide customer support. Instead, we believe that our device complements the available commercial offerings, and also provides a testing platform by allowing greater customization of nasometry hardware, including the use of different microphones and nasometer baffle sizes. 2 Open-source nasalance hardware 2.1 Motivations We report the design of an open-source, customizable, 3D-printed nasalance system. Our aims were to develop a reliable system that is easy to use, cheap to manufacture and provides additional flexibility as a testing and development platform. For example, our system allows for customized microphone selection and conventional microphone-level analog outputs, which also facilitates custom analog-domain signal processing (e.g. filtering), and analog-to-digital conversion. This opens up the possibility of using higher-quality pre-amplifiers and converters in the signal chain and better integration into multichannel acoustic/articulatory experiments. We provide guidance on modifying the design and all files necessary to 3D print the components in an online GitHub repository. 1 1 1 https://github.com/phoneticslab/nosey All versioned releases are archived at: https://doi.org/10.5281/zenodo.15543852 2.2 3D-printed hardware Figure 1 shows an exploded view of the 3D model comprising three major components: (i) handle; (ii) baffle; (iii) dual microphone clip, which we review in the rest of this section. Figure 1: Exploded view of 3D model for the nasalance system. Figure 2 shows an assembled view of the 3D model design. The bolt at (1) fixes the handle (2) to the baffle (3). The removable microphone clip at (4) slots into the baffle and can be replaced with alternative versions to allow swapping different microphones and/or clips that are positioned closer to or further away from the edge of the baffle. Figure 2: Assembled view of 3D model for the nasalance system. 2.3 Microphones and clips Figure 3 shows the 3D diagram of the articulated dual microphone holder. Label (8) shows the base that attaches to the baffle, while (5) and (7) are the microphone clips that attach to the base plate at (6). Note that the microphone clips in (5) and (7) are removable and can be replaced with alternative

Read the complete text