Competition between heating and cooling effects in an optomechanical oscillator using a squeezed field
\name Vinh N.T. Pham a , Chu Manh Hoang b , and Nguyen Duy Vy c,d, ∗ · 2025
Read Competition between heating and cooling effects in an optomechanical oscillator using a squeezed field by \name Vinh N.T. Pham a , Chu Manh Hoang b , and Nguyen Duy Vy c,d, ∗ (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-20833.txt.
Introduction
Pham, Hoang, and Vy wrote a 2025 physics paper on cooling a tiny vibrating device with squeezed light. Squeezed light has one property trimmed below normal noise, and it can help sensors. It may also cool the device past the limit set by plain laser light.
They map how the squeeze strength and phase set the final heat of the device. The wrong phase heats rather than cools. At the best phase, the final temperature fell a thousandfold versus no squeezing. Their test system uses a common laser colour and a standard device rate. The results guide how to tune squeeze for the coldest result.
Catalog record
| CREATOR | \name Vinh N.T. Pham a , Chu Manh Hoang b , and Nguyen Duy Vy c,d, ∗ |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 25 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-20833
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Competition between heating and cooling effects in an optomechanical oscillator using a squeezed field \name Vinh N.T. Pham a , Chu Manh Hoang b , and Nguyen Duy Vy c,d, ∗ Abstract Squeezed light is a useful phenomenon that can be exploited to improve the sensitivity of specific classes of detectors based on optomechanical effects. Recently, there has been significant interest in the potential application of a squeezed field in the cooling of an optomechanical oscillator. It has been shown that this field could cool an oscillator below the standard limit of a coherent field. In this study, the effect of squeezed light was evaluated by explicitly examining the role of the squeezing parameters on the final effective temperature of the oscillator. The results show that the observed cooling and heating effects are strongly dependent on the squeezing parameters and the phase. Using an oscillator of 2 π × \pi\times 10.1 MHz driven by a 1064-nm laser, the lowest effective temperature and quantum number are three orders of magnitude smaller compared to the case of no squeezing; especially, these minimum values are obtained at the squeezing phase of about 0.8 π \pi . This study highlighted important insights for the optimization of cooling efficiency using squeezed light. keywords optical multilayer; radiation pressure; optomechanics; laser cooling; squeezed field 1 Introduction The optomechanical oscillator is an essential element in various fields of research such as the measurement of gravitational waves [ 1 , 2 ] and quantum information technologies [ 3 , 4 ] . As a tested mass, when downscaled closer to the quantum regime, the effects of noise inevitably increase and obscure the observation results. Therefore, a systematic study of noise reduction is crucial. The dynamics of a tested mass exhibit a strong dependence on optomechanical coupling, in which a radiation force (RF) plays the role of the driving force [ 5 , 6 , 7 , 8 ] . Such a coupling modifies the mass’s motion and gives rise to damping via the back action of photon collision and photothermal induction [ 9 , 10 ] . This effect can be strongly enhanced in microcavity systems with high finesse because the effective elastic rigidity is modulated by the stored photons. At the near resonance position, the intracavity power has a quadratic dependence on small changes in the length of the cavity, and a linear dependence in the case of a detuned cavity. To achieve appropriate detuning, it was reported that passive optical cooling [ 9 ] in a micro-mechanical resonator quenched fluctuation of a gold-coated silicon cantilever to an effective temperature of 18 K using light-induced force. This is the result of light scattering and absorption that is enhanced in the cavity [ 11 ] . Recent calculations [ 12 , 13 , 14 , 15 ] using Maxwell’s stress tensor has shown a Lorentzian form of the RF inside the cavity. In the vicinity of the resonance position, a linear dependence of the RF on the displacement could be implemented, and a linear optomechanical coupling strength is adopted. Instead of using coherent light as the driving field to control and cool the dynamics of a mechanical oscillator, recent studies have investigated squeezed light as a potential driving source. Squeezed light could be created by parametric amplification [ 16 , 17 ] or by using radiation pressure shot noise [ 18 ] . This phenomenon was first observed [ 19 ] in a four-wave mixing experiment using a parametric oscillator or a parametric down-converter. With quantum fluctuations below that of a vacuum field, this light could be used in many high precision measurements because it could reduce the optical read-out noise [ 20 ] , monitor mechanical motion, enhance the feedback control of the mechanical mode [ 21 , 22 ] , and elucidate the classical-quantum boundary [ 23 , 24 ] . The potential role of squeezed light in the cooling of mechanical oscillators has generated significant interest from both theoretical and experimental viewpoints [ 25 , 26 ] . Several effects are expected to occur at a very low noise level once the oscillator is cooled to sub-millikelvin temperatures. However, a detailed investigation of the dependence of the cooling efficiency on the squeezing parameters and phase has not been performed. In this study, squeezed light is used as the driving field for a mechanical oscillator. By explicitly examining the role of the squeezing parameters and phase on the final mechanical energy of the oscillator, we show that the oscillator could be heated or cooled depending on the characteristics of the driving field. For a mechanical oscillator of \omega_{m} = 2 \pi\times 10.1 MHz driven by a ( \lambda =) 1064-nm (Nd:YAG) laser, the minimal effective temperature and quantum number were seen at the squeezing phase of 0.8 \pi . It is worth to noting that this phase is the result of the competition between the heating and cooling effects and is dependent on the parameters of the system, e.g. the mass and frequency of the oscillator ( m and \omega_{m} ) and the optical wavelength ( \lambda ). The effective temperature and quantum number of the oscillator could be three orders of magnitude lower compared to non-squeezing light. This reduction is much lower than the value obtained in previous studies whereby after the optimization of all parameters, a decrease in temperature of approximately one to two orders of magnitude was reported. 2 Hamiltonian formalism for optomechanical systems Consider an optical cavity system with one movable mirror that can be considered to be a mechanical oscillator, as shown in Fig. 1 . The fixed mirror is assumed to be semi-transparent and the movable mirror is totally reflective. When the system is irradiated by a laser, the trapped light between the mirrors could be significantly enhanced and the intensity is dependent on the position of the movable mirror near the resonance position. The momentum of the photons creates a radiation pressure (RP) on the mirror, which could displace the oscillator out of its equilibrium position. Once the oscillator is displaced, the system loses its resonance, i.e., the cavity length is no longer a multiple of half laser wavelengths ( \lambda=\omega_{p} /c where \omega_{p} is the laser frequency and c is the speed of light) and the light intensity inside the cavity is reduced, in addition to the RP exerted on the oscillator. This means the oscillator could return its previous equilibrium position because the pushing force is reduced and the Hooke’s force is increased. This is the coupling mechanism between the laser and the mechanical oscillator. Figure 1: Optical microcavity in Hamiltonian formalism wherein the cavity photons (frequency \omega_{c} and damping rate \kappa ) couple with the mechanical mode (frequency \omega_{m} and damping rate \gamma_{m} ) depending on the coupling strength g_{m} . In the Hamiltonian formalism, the optical modes are quantized and the mechanical one is kept as a c -number. The Hamiltonian of the oscillator is H_{m}=(1/2)(P^{2}/m+m\omega_{m}^{2}Q^{2}) where P is the momentum operator and Q is the position operator that satisfies [P,Q]=-i\hbar . Using p=P/\sqrt{m\hbar\omega_{m}} and q=Q\sqrt{m\omega_{m}/\hbar} , we obtain H_{m}=(1/2)\hbar\omega_{m}(p^{2}+q^{2}) , where the q and p operators satisfy the commutator [q,p]=i . The linear coupling (interaction)