Relationship of structural disorder and stability of supercooled liquid state with glass-forming ability of metallic glasses
J.B. Cui, R.A. Konchakov, G.V. Afonin, A.S. Makarov, G.J. Lyu, J.C. Qiao, N.P. Kobelev, V.A. Khonik · 2025
Read Relationship of structural disorder and stability of supercooled liquid state with glass-forming ability of metallic glasses by J.B. Cui, R.A. Konchakov, G.V. Afonin, A.S. Makarov, G.J. Lyu, J.C. Qiao, N.P. Kobelev, V.A. Khonik (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-17874.txt.
Introduction
Metallic glasses are metals that cool into a glass-like state instead of forming crystals, and some form that state far more easily than others. Cui and co-authors measured heat effects in 26 such glasses in 2025. From those measures they built two simple numbers that capture how disordered the cooled liquid is and how stable it stays on heating.
Both numbers tracked well with known data on how fast a glass must cool and how thick a piece can be cast. The authors discuss how the disorder may link to defects frozen into the glass. Their measures offer a quicker way to judge which new alloys are likely to form glass well.
Catalog record
| CREATOR | J.B. Cui, R.A. Konchakov, G.V. Afonin, A.S. Makarov, G.J. Lyu, J.C. Qiao, N.P. Kobelev, V.A. Khonik |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-17874
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Relationship of structural disorder and stability of supercooled liquid state with glass-forming ability of metallic glasses J.B. Cui, R.A. Konchakov, G.V. Afonin, A.S. Makarov, G.J. Lyu, J.C. Qiao, N.P. Kobelev, V.A. Khonik Abstract We performed calorimetric studies of 26 metallic glasses and calculated the excess entropy and excess enthalpy with respect to their counterpart crystals. On this basis, we introduced a dimensionless entropy-based parameter σ s c l \sigma_{scl} , which characterizes structural disordering and stability of the supercooled liquid state upon heating. A very good correlation of σ s c l \sigma_{scl} with literature data on the critical cooling rate R c R_{c} and critical diameter D m a x D_{max} of metallic glasses is shown. We also introduced another dimensionless parameter η s c l \eta_{scl} based on the excess enthalpy of glass and showed that η s c l \eta_{scl} provides equally good correlation with R c R_{c} and D m a x D_{max} . Possible relationship of structural disordering and glass-forming ability in the supercooled liquid range with the defect structure of glass is discussed. The obtained results provide a new window for the understanding of the glass-forming ability of metallic glasses. 1 Introduction Melts of different materials can be cooled below the equilibrium solidus point. If the undercooling is significant, the melt freezes and forms a glass. The prediction and physical interpretation of the glass-forming ability (GFA) of undercooled melts is one of major problems in the physics of glassy materials. Quantitatively, the GFA is estimated by the critical cooling rate R_{c} , which is the minimal rate of melt cooling required to produce a glass. Another GFA measure is the maximal diameter of fully non-crystalline casting produced by melt cooling, which is called the critical diameter D_{max} . Both GFA parameters, R_{c} and D_{max} , are not easy to be determined and, therefore, quite a few indirect GFA measures have been proposed, which make use of a combination of characteristic temperatures, e.g. the glass transition, crystallization and liquidus temperatures ChattopadhyaMaterSciTechnol2015 . The GFA of metallic glasses (MGs) has been analyzed in numerous works, e.g. see the reviews ChattopadhyaMaterSciTechnol2015 , LuIntermet2007 , MakarovJRTPLett2024 . It is known that the GFA of metallic systems strongly depends on chemical composition so that even various minor dopants can change it strongly WangWHPMS2007 . To interpret the GFA, different approaches are used, in particular accounting for the difference between the atomic diameters of the alloy components InoueActaMater2000 , mismatch enthalpy and entropy TakeuchiMaterTransJim2000 , melting and mixing enthalpy CaiMSE2007 , mismatch entropy and configurational entropy RaoIntermetallics2013 , etc. ChattopadhyaMaterSciTechnol2015 . However, the thermodynamic parameters used for GFA estimates TakeuchiMaterTransJim2000 , CaiMSE2007 , RaoIntermetallics2013 are the same for both crystalline and glassy states that strongly restricts their significance. The entropy approach to the understanding of different MGs’ properties is of a special interest JohariJPC2019 , YangJPCL2022 , FengFundRes2022 , LuJPCL2023 . In particular, entropy notions were recently applied to GFA analysis of MGs MakarovJRTPLett2024 , MakarovScrMat2024 . First, it was shown that the GFA estimated via a number of parameters based on characteristic temperatures systematically increases with the excess entropy \Delta S of glass with respect to the maternal crystalline state provided that this entropy is calculated for the supercooled liquid (SCL) state MakarovJRTPLett2024 . Therefore, the GFA of undercooled melts increases with structural disorder in the SCL state occurring upon heating. Similar conclusion was derived by the authors MakarovScrMat2024 , who introduced a dimensionless parameter of structural order, \xi(T)=1-\frac{\Delta S(T)}{S_{m}} , where S_{m} is the melting entropy. A study performed on several MGs showed that \xi calculated again for the SCL state increases strongly with R_{c} and, therefore, the GFA increases with structural disorder controlled by the entropies \Delta S and S_{m} . However, the use of \xi -parameter is strongly limited because the liquidus temperatures of MGs usually exceed 900 K and, therefore, it is impossible to determine the melting entropy S_{m} using conventional calorimeters. In the view of the above, the aim of this work is to systematically test the hypothesis that the GFA of metallic melts is related to the excess entropy and excess enthalpy of corresponding glasses. We suggested new entropy- and enthalpy-based parameters and using the data on 26 MGs in bulk and ribbon forms showed a very good correlation of these parameters with literature data on the GFA expressed by R_{c} and D_{max} . 2 Experimental Table 1: Critical cooling rate R_{c} , critical diameter D_{max} , excess entropy \Delta S and excess enthalpy \Delta H of bulk and ribbon metallic glasses at the glass transition temperature T_{g} and in the end of the supercooled liquid range. N Glass R_{c} D_{max} {\Delta S}_{T_{g}} {\Delta S}_{scl} {\Delta H}_{T_{g}} {\Delta H}_{scl} [K/s] [mm] [ \frac{J}{K\times mol} ] [ \frac{J}{K\times mol} ] [ \frac{kJ}{mol} ] [ \frac{kJ}{mol} ] 1 Zr 58.5 Nb 2.8 Cu 15.6 Ni 12.8 Al 10.3 (ribbon) 1.75 HaysAPL2001 — 3.9 5.1 2.9 3.8 2 Zr 66 Al 9 Cu 16 Ni 9 (ribbon) 4.10 LuIntermet2007 — 7.3 7.7 5.3 5.6 3 Zr 66 Al 8 Cu 12 Ni 14 (ribbon) 9.80 LuIntermet2007 — 6.5 7.7 4.7 5.5 4 Zr 55 Al 19 Co 19 Cu 7 (ribbon) 16.0 MukherjeePRB2004 — 3.3 3.7 2.6 2.9 5 Zr 55 Al 22.5 Co 22.5 (ribbon) 18.0 MukherjeePRL2005 — 7.1 7.3 5.8 6.0 6 Zr 66 Al 8 Cu 7 Ni 19 (ribbon) 22.7 LuIntermet2007 — 7.5 8.3 5.4 5.9 7 Zr 60 Cu 20 Ni 8 Al 7 Hf 3 Ti 2 (ribbon) 33.5 XingJALCOM2004 — 5.2 5.7 3.7 4.1 8 Zr 66 Al 8 Ni 26 (ribbon) 66.6 LuIntermet2007 — 8.0 9.5 5.9 6.1 9 Zr 65 Al 10 Ni 10 Cu 15 (bulk) 4.10 WangJAP2006 — 9.0 10.4 6.6 7.5 10 Zr 55 Co 25 Al 20 (bulk) 16.5 MukherjeePRB2004 2.5 LongJALCOM2009 6.0 6.4 4.9 5.2 11 Zr 57 Nb 5 Al 10 Cu 15.4 Ni 12.6 (bulk) 10.0 RyuAPLMater2017 11.2 ChattopadhyayMST2016 5.3 6.6 5.0 6.0 12a Zr 52.5 Ti 5 Cu 17.9 Ni 14.6 Al 10 (bulk) 4.50 XingJALCOM2004 10 ChattopadhyayMST2016 3.8 4.4 2.8 3.2 12b Zr 52.5 Ti 5 Cu 17.9 Ni 14.6 Al 10 (bulk) 25.0 RyuAPLMater2017 10 ChattopadhyayMST2016 3.8 4.4 2.8 3.2 13 Pd 40 Cu 30 Ni 10 P 20 (bulk) 0.10 InoueMT1997 72 ChattopadhyayMST2016 4.4 6.8 3.0 4.4 14 Pd 40 Cu 30 Ni 10 P 20 (ribbon) 0.10 InoueMT1997 72 ChattopadhyayMST2016 3.1 4.6 2.0 3.0 15 Ti 34 Zr 11 Cu 47 Ni 8 (ribbon) 100 LuIntermet2007 3.0 ChattopadhyayMST2016 8.9 9.2 7.0 7.3 16 Zr 57 Ti 5 Al 10 Cu 20 Ni 8 (ribbon) 10.0 LuIntermet2007 10 ChattopadhyayMST2016 4.5 4.9 3.3 3.6 17 Zr 65 Al 7.5 Cu 17.5 Ni 10 (ribbon) 1.50 LuIntermet2007 16 ChattopadhyayMST2016 6.2 9.6 4.5 5.6 18 Pd 40 Ni 40 P 20 (ribbon) 1.6 SenkovPRB2007 25 YCHuPRM2019 6.3 8.4 4.2 5.5 19a Pd 40 Ni 40 P 20 (bulk) 1.6 SenkovPRB2007 25 YCHuPRM2019 7.5 9.8 5.1 6.4 19b Pd 40 Ni 40 P 20 (bulk) 0.17 WangJAP2006 25 YCHuPRM2019 7.5 9.8 5.1 6.4 20 Zr 46 Cu 46 Al 8 (bulk) 4.0 LanAPL2014 — 3.9 5.3 3.0 4.0