Characterization of IRS-aided Indoor Wireless Virtual-Reality with Hybrid Beamforming
Nasim Alikhani, Abbas Mohammadi, AUT-Wireless Research Lab., Electrical Engineering Department, Amirkabir University of Technology, Tehran, Iran · 2025
Read Characterization of IRS-aided Indoor Wireless Virtual-Reality with Hybrid Beamforming by Nasim Alikhani, Abbas Mohammadi, AUT-Wireless Research Lab., Electrical Engineering Department, Amirkabir University of Technology, Tehran, Iran (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-17737.txt.
Introduction
Nasim Alikhani and Abbas Mohammadi model indoor wireless for virtual reality in a 2025 paper. VR traffic needs high data rates and low delay, which pushes systems into millimeter-wave bands. Reflecting surfaces on walls, called intelligent reflecting surfaces, can steer those signals around corners.
Their system joins multi-user beamforming with such a surface in a downlink setup. A utility score balances data rate against processing, transmission, and queue delays in both directions. An iterative method sets the surface's phase shifts and channel gains. Against a standard network simulator, their computed rates matched within about 82 percent accuracy, with lower complexity than rival designs.
Catalog record
| CREATOR | Nasim Alikhani, Abbas Mohammadi, AUT-Wireless Research Lab., Electrical Engineering Department, Amirkabir University of Technology, Tehran, Iran |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 43 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-17737
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Characterization of IRS-aided Indoor Wireless Virtual-Reality with Hybrid Beamforming Nasim Alikhani, Abbas Mohammadi, AUT-Wireless Research Lab., Electrical Engineering Department, Amirkabir University of Technology, Tehran, Iran Abstract This paper introduces an optimum solution for a utility function that increases spectral efficiency in wireless Virtual Reality (VR) systems. This system uses Multi-user Multiple Input Multiple Output Orthogonal Frequency Division Multiplexing (MU-MIMO OFDM) with hybrid beamforming in indoor Intelligent Reflecting Surface (IRS) based Downlink (DL) scenario. Given the critical need to maximize the rate for transmitting VR traffic to meet the low-latency requirements, a substantial bandwidth allocation is essential. This bandwidth is assumed to be in the mmWave band, according to the IEEE 802.11ad/ay standard. The proposed utility function takes into account various delays, including processing, transmission and queuing delays, on both DL and Uplink (UL). Moreover, the relation between transmission delay and the utility function is examined in different Signal-to-Noise Ratio (SNR) levels, using both mean and minimum channel gain metrics. An optimization approach is applied to iteratively determine the IRS phase shifts and effective channel gain. The simulation results are benchmarked against NS3 simulations, showing a high degree of consistency. With an average accuracy of 81.57% the calculated DL and UL rates match the NS3 results when considering the IRS. Also, our proposed method achieves superior performance in the case of complexity over the existing designs. I Introduction Immersive Virtual Reality (VR) experiences have attracted significant interest from the industry, particularly in terms of delivering high-definition content [1-5]. However, several challenges persist in wireless networks delivering VR, such as ensuring high-resolution VR content, accommodating user mobility and minimizing transmission latency [6]. Existing Wi-Fi standards in Wireless Local Area Networks (WLANs) are inadequate for meeting the required Quality of Service (QoS) levels, particularly in environments with high user density [7]. On the other hand, mmWave technology offers substantial advantages, including high data transmission rates and increased bandwidth. The IEEE 802.11ay standard, which considers the mmWave frequency range, delivers extremely high throughput—up to 100 Gbps in the Downlink (DL)—along with ultra-low latency performance. In the Multi-user (MU)-MIMO framework, multiple users can receive simultaneous service from a single transmitter, such as an Access Point (AP) [8]. Hybrid beamforming is employed in mmWave systems, integrating both digital and analog components. Low-cost and energy-efficient Intelligent Reflecting Surface (IRS) can play a key role in mmWave systems by establishing a direct communication link between the transmitter and the user, even in the presence of obstacles [9]. Key factors that influence VR services include tracking accuracy, transmission delays, processing delays and queuing delays [10]. Ensuring high data rates in VR applications remains a significant challenge due to processing and transmission delays [10]. Recent studies highlight the potential of integrating IRSs into conventional multi-user wireless networks to address these issues [11-13]. Jalali et al. explored IRS configurations aimed at enhancing energy efficiency and optimizing admission control for IoT devices operating with short packets [11]. Additionally, Zhou et al. tackled latency reduction in a secure, multi-user IRS-enabled VR communication setup under conditions of imperfect CSI [13]. However, based on our current understanding, no existing research has focused on optimizing an IRS-powered indoor VR network within a constrained 3D environment while considering its impact on processing, transmission and queuing delays. Furthermore, comparisons of this metric across different codebook strategies remain unexplored. IRS have been introduced to enhance mmWave systems, with much of the research emphasizing sum rate maximization while adhering to power and unit modulus constraints [9, 14]. This paper proposes a novel framework for optimizing a novel multi-attribute utility function-constrained hybrid analog and digital beamforming strategy in mmWave systems. Additionally, IRS is integrated to enhance mmWave communications in VR applications. We propose a multi-attribute utility function that integrates all these factors, based on computed data rates in both DL and Uplink (UL) conditions. This innovation is not considered in VR papers [1-5, 10, 15, 16] . To optimize the phase shifts of IRS elements, we apply the Riemannian Conjugate Gradient (RCG) method while separately optimizing the hybrid beamforming matrices. In this paper, a novel multi-attribute utility function is proposed that is based on three types of delay: transmission, processing and queuing delay.The proposed hybrid beamforming method exhibits low computational complexity in the calculation of hybrid beamforming matrices for Multi-user Multiple Input Multiple Output Orthogonal frequency-division multiplexing (MU-MIMO OFDM) systems. The considered scenarios include the mean and minimum channel gain cases. A non-convex optimization problem based on a proposed multi-attribute utility function is formulated. To solve this function with coupled variables, an efficient algorithm based on Alternating Optimization (AO) is developed. Simulation results for an IRS-aided system based on IEEE 802.11ay in an indoor environment using NS3 and MATLAB are provided. The results of MATLAB and NS3 simulations are compared using six different codebooks generated in NS3: ”2 Antennas, 1 RF chain”, ”2 Antennas, 2 RF chains”, ”4 Antennas, 1 RF chain”, ”4 Antennas, 2 RF chains”, ”8 Antennas, 1 RF chain” and ”8 Antennas, 2 RF chains”. The rest of the paper is organized as follows: In Section II, system model is presented. In Section III, delay considerations and the utility function are described. In Section IV, the details of the solution approach adopted for addressing the optimization problem are outlined. In Section V, the indoor area and simulation results are explained. Finally, the conclusion is presented in Section VI. Notation: A matrix is represented by a boldface alphabetic character such as x, a vector is represented in italic format with an underline such as x , and scalar numbers are represented by x . (.)^{-1} and (.)^{H} denote the inverse and hermitian of a complex matrix, respectively. {\circ} stands for the Hadamard (elementwise) product. II SYSTEM MODEL In this section, we first present the optimization problem. We then describe the channel models for both the UL and DL, along with the relevant delay factors and the formulation of the utility function in the presence of IRS elements. Figure 1: System Model configuration. As depicted in Fig. 1, the system consists of two APs and four users. Because obstacles may weaken the Line-of-Sight (LoS) path, the IRS is introduced to improve the connection between the users and the APs. For this reason, IRS elements are placed between the APs and the users. The solid black lines in Fig. 1 indicate the main DL beam directions — from the AP to the IRS and from the IRS to the user. The dashed black lines show the main UL beam directions — from the user to the IRS and then from the IRS to the AP. Each AP can be equipped with 1, 2, or 4 antennas, while each user has a single antenna. However, the formulations of DL and UL channels are illustrated based on MU-MIMO OFDM. II-A Optimization Problem The goal of the proposed method is to simultaneously determine the maximum QoS requirements for users in VR systems. The corresponding optimization problem is formulated in (1). This problem can also be expressed as finding the optimal closed-form solution for the utility function. Since the problem is non-convex, its formulation is presented in (1). \displaystyle\max_{\underline{\mathbf{U}_{j}},\mathbf{w}_{i}^{n},\mathbf{f}_{i% }^{n},\boldsymbol{\Phi}} \displaystyle\sum_{j\in\mathcal{B}}\sum_{i\in\underline{\mathcal{U}_{j}}}\sum_% {n=1}^{N_{cs}}\mathbf{U_{i}}\left(\mathbf{D}_{ijn},K_{ijn}\right) (1) s.t. \displaystyle|\underline{\mathcal{U}_{j}}|\leq\underline{V_{j}},\quad\forall j% \in\mathcal{B} (a) \displaystyle\mathbf{c_{ij}}^{DL}\geq R_{ij}^{\min},\quad\forall j\in\mathcal{% B},\forall i\in\mathcal{U}_{j} (b) \displaystyle\mathbf{P}_{A_{i}}\in\underline{\mathcal{N}_{AP}^{j}},\quad[%