Guided polariton condensate in perovskite microwires Journal: opticajournal Publication type: Research Article

Maciej Nytko, 1 Mateusz Kędziora, 1 Maciej Zaremba, 1 Marek Ekielski, 2 Anna Szerling, 2 Krzysztof Tyszka, 1 Barbara Piętka 1,* · 2025

Read Guided polariton condensate in perovskite microwires Journal: opticajournal Publication type: Research Article by Maciej Nytko, 1 Mateusz Kędziora, 1 Maciej Zaremba, 1 Marek Ekielski, 2 Anna Szerling, 2 Krzysztof Tyszka, 1 Barbara Piętka 1,* (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-17728.txt.

Introduction

Maciej Nytko and six colleagues watch light-matter condensates travel down perovskite wires, in a 2025 paper. Perovskite microwires guide light naturally and respond strongly to it, which suits them for compact photonic circuits.

The team built a multi-angle detection setup to track exciton-polariton condensates, hybrid particles of light and matter, inside the wires. Condensate glow appeared at the wire's far end even when the condensate formed tens of micrometers away, proof of long-range travel. Defects near the birth site could boost the end glow by steering the condensate's momentum along the wire. The findings support wires as channels that carry coherent light signals across a chip.

Catalog record

CREATORMaciej Nytko, 1 Mateusz Kędziora, 1 Maciej Zaremba, 1 Marek Ekielski, 2 Anna Szerling, 2 Krzysztof Tyszka, 1 Barbara Piętka 1,*
YEAR2025
COLLECTIONPAPERS
FORMATTXT
FILE SIZE16 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2505-17728

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Guided polariton condensate in perovskite microwires Journal: opticajournal Publication type: Research Article Maciej Nytko, 1 Mateusz Kędziora, 1 Maciej Zaremba, 1 Marek Ekielski, 2 Anna Szerling, 2 Krzysztof Tyszka, 1 Barbara Piętka 1,* Abstract Perovskite microwires are promising candidates for integrated photonic systems due to their strong nonlinear optical response and inherent waveguiding capabilities. In this study, we focus on the directional emission properties of exciton-polariton condensates formed within perovskite microwires, with emphasis on emission collected from the microwire end. We constructed a multi-angle optical detection setup that allows us to identify the exciton-polariton condensation threshold and track the evolution of the condensate for different excitation position along and across the microwire. We observe spectrally narrow exciton-polariton condensate emission from the microwire end even when the condensate is generated tens of micrometers away, which demonstrates the ability of the exciton-polariton condensate to propagate over long distances within the microwire. Furthermore, we find that the presence of structural defects near the condensate location can significantly enhance the emission from the microwire end due to aligning the condensate’s momentum with the waveguide direction, thereby facilitating more efficient propagation. 1 Introduction Lead-halide perovskite materials have emerged as promising candidates for the development of integrated photonic systems due to their optical properties [ 1 , 2 , 3 , 4 , 5 ] . In particular, these materials can support the formation of exciton-polariton condensates [ 6 , 7 , 8 ] (further referred to as condensates) even at room temperature [ 2 , 9 , 10 ] . Those condensates exhibit strong optical nonlinearities [ 10 , 11 ] , one of the essential features for the implementation of neuromorphic computing architectures [ 3 , 12 ] . Furthermore, the high refractive index of perovskites enables efficient light confinement within the structure, allowing them to function as optical waveguides without the need for additional structuring or cladding beyond direct crystallization [ 10 , 13 , 14 , 15 , 16 ] . This dual functionality, serving both as a nonlinear light source and a waveguiding medium, offers the potential to significantly simplify the design and fabrication of compact integrated photonic circuits, eliminating the need to combine multiple materials and processing steps [ 17 , 18 ] . Thanks to advancing perovskite microwire fabrication methods, we are capable of designing and manufacturing various predefined geometries, such as microwires, couplers, and splitters [ 10 ] . In this work we investigate the optical properties of CsPbBr 3 perovskite microwires, which serve both as the material in which exciton-polariton condensates are generated and as optical waveguides facilitating their propagation. By analyzing the efficiency of condensate transport along these microwires, we uncover key mechanisms that govern long-range polariton flow [ 19 ] in perovskite structures. These insights are essential for advancing the development of compact, all-optical circuits and neuromorphic photonic networks, where controlled condensate transport plays a critical functional role [ 20 , 21 ] . 2 Methods To investigate the emission characteristics of perovskite microwires, we built an optical setup that enables simultaneous observation of emission in multiple directions from the microwire. A schematic representation of the set-up is shown in Figure 1 . The microwire is optically excited from the top by Optical Parametric Amplifier (OPA) pumped by pulsed picosecond laser. We tuned the OPA to emit 1.5 ps pulses with a central wavelength of 435 nm, far above the excitonic resonance in CsPbBr 3 [ 10 ] . Pump pulses were focused on the perovskite microwire by 50x objective with NA 0.22, resulting in a pump spot size of approximately 8 \mu m (defined at the 1/e^{2} intensity level). Emission from the microwire was simultaneously collected from multiple directions using separate cameras: camera ① collected emission normal to the substrate (top), camera ② collected emission along the long axis of the microwire (side), camera ③ collected emission from the microwire end. A 50/50 beam splitter can be placed in front of any camera to redirect part of the emission into a spectrometer. Each detection path was equipped with long-pass spectral filter with edge at 473 nm in order to suppress the scattered laser pump. On the right side of Figure 1 we show representative emission images acquired with cameras when a polariton condensate is formed within the microwire. Those images correspond to detection via camera ① (top), camera ② (side), and camera ③ (end), respectively. In each image, we have outlined with dashed lines the boundaries of the perovskite microwire and substrate. Figure 1 : Emission detection setup. Perovskite microwire is pumped with 435 nm pulsed laser, and its emission from each side of the perovskite microwire is collected via CCD cameras. Images ①, ② and ③ on the right side show typical emission from each side of microwire when condensate is formed. Dashed lines outline perovskite and substrate boundaries. 3 Condensate formation and emission characteristic Under non-resonant optical excitation at 435 nm the perovskite microwire exhibits spontaneous emission due to the recombination of free excitons in the spectral range of approximately 500 - 560 nm, as illustrated in Figure 3 a. The emission increases linearly with pump pulse energy until reaching the threshold when the exciton-polariton condensate begins to form. The strong coupling between excitons and photons arises from the natural formation of a Fabry–Pérot resonator across the microwire, enabled by the high refractive index of the perovskite. Excitons couple to various transverse standing-wave modes, leading to the formation of exciton-polaritons. The lower polariton branch is energetically shifted from the excitonic resonance due to Rabi splitting, estimated to be 125 meV [ 10 ] . At the condensation threshold, polaritons begin to macroscopically occupy a specific optical mode in which gain and loss are balanced, leading to a lasing-like emission from the spontaneously formed polariton condensate. The condensate exhibits a spectrally narrow emission in green range, and its emission intensity increases nonlinearly with pump pulse energy significantly more rapidly than spontaneous emission. This nonlinear growth in emission intensity is a hallmark of the phase transition into the condensate state [ 22 , 11 , 10 ] . Figure 2 a shows typical emission intensities measured at the condensate wavelength as a function of the excitation pulse energy recorded from the top, side, and end of microwire. In all three detection configurations, the plots reveal a clear nonlinear threshold behaviour, indicative of condensate formation. Figure 2 : Relation between pump pulse energy and perovskite microwire emission intensity measured from three directions. b, d, and f show normalized camera images of microwire emission before condensation for respectively top, side, and end of the microwire. c, e, and g show normalized camera images of microwire emission after condensation for respectively top, side, and end of the microwire. Figures 2 b-g show camera captured intensities before and after condensate formation in the perovskite microwire. In the top and side views (Figures 2 b-e), the emergence of the condensate leads to a pronounced increase in emission intensity observed at the edges of the microwire, which dominates over the background spontaneous emission. The condensate formation is far less visible when looking at microwire end as depicted in Figures 2 f-g. Although a nonlinear increase in emission intensity is still

Read the complete text