A two-sided subgrid-scale model for mass transfer across fluid interfaces
Moritz Schwarzmeier, Tomislav Marić, Željko Tuković, Dieter Bothe · 2025
Read A two-sided subgrid-scale model for mass transfer across fluid interfaces by Moritz Schwarzmeier, Tomislav Marić, Željko Tuković, Dieter Bothe (2025) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2505-17036.txt.
Introduction
Where two fluids meet, a dissolved substance crossing the boundary piles into layers thinner than any simulation grid can draw. Moritz Schwarzmeier, Tomislav Marić, Željko Tuković, and Dieter Bothe built a fix for that blind spot in 2025. Their subgrid model computes the crossing rate from the layer's physics on both sides of the boundary at once.
Older tricks handled one side only, and in liquid-liquid systems neither side's surface concentration is known ahead of time. The paired model solves that coupled puzzle and keeps transfer rates accurate even on coarse meshes with steep gradients. The team built it into an open-source simulation toolkit they had released earlier.
Catalog record
| CREATOR | Moritz Schwarzmeier, Tomislav Marić, Željko Tuković, Dieter Bothe |
|---|---|
| YEAR | 2025 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 102 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2505-17036
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A two-sided subgrid-scale model for mass transfer across fluid interfaces Moritz Schwarzmeier, Tomislav Marić, Željko Tuković, Dieter Bothe Abstract The occurrence of extremely thin concentration boundary layers at fluid interfaces for high local P é clet numbers is a severe obstacle for efficient and accurate numerical simulation of mass transfer processes in two-phase fluid systems. Especially challenging are liquid-liquid systems, in which thin concentration boundary layers can appear on both sides of the fluid interface under convection-dominated conditions. In those cases, the one-sided species concentrations at the interface are a-priori not even known approximately, but are determined by a conjugate mass transfer problem governed by interfacial jump conditions. To the best of the authors’ knowledge we for the first time introduce a two-sided subgrid-scale (SGS) boundary layer model for conjugate mass transfer at fluid interfaces. It accurately computes the local mass transfer rates on moderate or coarse mesh resolutions even when very high concentration gradients in interface vicinity occur. For this purpose, SGS modeling is applied on both sides of an interface transmissive to passive scalars, such as the interface in a two-phase fluid system , enabling the accurate capture of conjugate mass transfer across thin boundary layer on one or on both sides of the interface. We implement our approach in the unstructured Finite-Volume Arbitrary Lagrangian / Eulerian Interface-Tracking (ALE-IT) OpenFOAM module twoPhaseInterTrackFoam . We have made twoPhaseInterTrackFoam publicly available in our previous publication (Schwarzmeier et al., 2025). 1 Introduction 1.1 Motivation Mass transfer across fluid interfaces plays a crucial role in many chemical processes and engineering applications like gas absorption, liquid–liquid extraction, chemical transformations like halogenations, polymerizations and nitrations [ 25 ] . Mass transfer can not only be enhanced by increasing the interface area, a strategy extensively used in heat exchangers and also deployed for multiphase microstructured reactors [ 25 ] , but also by creating conditions under which thin species boundary layers exist, increasing the mass transfer per interface area. Generally, there are different phenomena that occur in connection to thin boundary layers, which are instationarity [ 35 , 25 ] [ 12 , Fig. 1c] , advection-dominated transport (high P é clet number \operatorname{\mathit{P\kern-0.81778pte}} ) [ 51 , 37 , 43 ] , increased mixing due to secondary flow profile in laminar flow, e.g. Dean or slug flow (Taylor) vortices [ 27 ] or turbulent flow conditions [ 14 , 28 , 25 , 12 ] , and fast chemical reactions involv ing the transferred species [ 35 , 28 , 19 ] . There exists a variety of technical equipment used in chemical reaction engineering, where mass transfer plays a critical role: stirred tanks, centrifugal/plate/columns loop reactors, straight or coiled tubular reactors, static mixer reactors, film reactors and various microstructured reactors [ 25 ] . Chemical processes in which very thin boundary layers on both sides of an interface play a crucial role have been subject to research for more than a century [ 35 , 55 ] . Liquid-liquid extraction systems and dilute gas phase gas-liquid systems, such as those, where a rapid reaction of the transfer species occurs, are examples of such systems [ 25 ] . An overview of different engineering mass transfer models is given in [ 54 ] . A review of CFD technology for falling film heat and mass exchangers is given in [ 53 ] . Such exchangers are used for refrigeration, carbon dioxide capture/chemical absorption, distillation/desalination, and evaporation/condensation [ 53 ] . Our subgrid-scale model is able to handle cases where the concentration profiles are steep on both sides of an interface, the boundary layer thicknesses are small and the mass transfer resistance is of similar magnitude on both sides [ 28 ] . It can be applied to cases with uneven gradients/mass transfer resistance as well. For many gases at the air-sea interface, the mass transfer resistance on the liquid side prevails, as shown in [ 28 , Table 1] . An exception is sulphur dioxide SO_{2} because of its high solubility in combination with a very fast hydration reaction [ 28 ] . However, not only turbulence, as in [ 28 ] , affects gas transfer at the sea surface, but breaking waves increase it significantly by introducing instationarity, increasing the interface area and trapping air bubbles in the water phase, c.f. a most recent numerical study with low Schmidt number by [ 9 ] . 1.2 Approach We use Arbitrary Lagrangian / Eulerian Interface Tracking (ALE-IT) [ 56 ] together with subgrid-scale (SGS) modeling. The SGS modeling approach to mass transfer computation was introduced in [ 2 ] for Volume of Fluid (VoF) simulations with directional splitting, extended to general 3D SGS computations within VoF in [ 4 ] and significantly improved in [ 51 ] . It has been adapted to ALE-IT in [ 48 , 37 , 43 ] and applied to accurately compute diffusivity limited surfactant transport in [ 37 , 43 ] . 1 1 1 Note that in this paper, we refer to surface active agents ( surfactants ) as passive scalars, even though they can have a high impact on the overall flow. For our mathematical modeling and analysis we define passive scalars as scalar values, which do not directly affect the flow field in the bulk, i.e. they neither modify the equations nor the parameters in the Navier-Stokes equations inside the flow domain, as given in eqs. 1 . The ALE-IT method in OpenFOAM [ 56 , 57 , 43 ] is a method for the numerical simulation of multiphase flows. Its fundamental idea involves assigning each phase its own sub-domain, which deforms according to the flow. The incorporation of SGS modeling constitutes a distinguishing feature of our ALE-IT OpenFOAM module twoPhaseInterTrackFoam [ 43 , 41 ] , offering a significant enhancement. The SGS modeling approach is essential for simulating the transport of passive scalars in regimes characterized by high Schmidt (high Prandtl in case of heat transfer) and high P é clet numbers, where the associated scalar field locally exhibits length scales being orders of magnitude smaller than those governing the flow field. Traditional Finite Volume Method (FVM) discretization would necessitate resolving these fine scales using local mesh refinement. However, the strongly different length scales of the hydrodynamical and mass transfer boundary layers render numerical simulations of these processes computationally infeasible. The SGS model circumvents this limitation by leveraging an analytical solution to represent thin concentration or, more generally, passive scalar boundary layers at fluid interfaces, significantly reducing the need for (otherwise excessive) local mesh refinement. This can save multiple (local) mesh refinement levels, speeding up the simulation or even enabling otherwise computationally prohibitive simulations of relevant mass transfer phenomena, while generating very accurate results, as in [ 51 , 37 , 43 ] . Until now, SGS modeling has been limited to cases where a steep scalar gradient 2 2 2 We use the term steep gradient in this context to express a typical boundary layer characteristic: a boundary-normal gradient, that is high at a boundary and rapidly decreases towards zero within a short distance, the boundary layer thickness \delta , in boundary-normal direction. exists solely on one side of the interface. Often the